Войти:
Оценок - 2, средний балл: 4.5 ( )

Инструкция по эксплуатации BRK electronic, модель 9120 Series

Производитель: BRK electronic
Размер: 307.6 kb
Название файла: spec-sheet-9120-series-cm2864.pdf
Язык инструкции:en
Перейти к скачиванию



Фрагмент инструкции


Nos. 9120 and 9120B are wire-in, 120V AC 60Hz single and/or multiple station smoke alarms specifically designed for residential and institutional applications including sleeping rooms of hospitals, hotels, motels, dormitories and other multi-family dwellings as defined in standard NFPA 101. Models 9120 and 9120B comply with UL217, CSFM, NFPA 72, HUD, FHA and other agencies that model their codes after the above agencies. They meet building codes where AC and AC/DC with Silence smoke alarms are required. The alarms are interconnectable with up to 18 devices, of which 12 can be smoke alarms. The BRK® 9120 Series alarms feature a dual ionization smoke sensing chamber -screened for insect protection, an 85dB horn, 9V battery back-up (all versions except model 9120) and a “silence” feature. The “Smart Technology” system is designed to reduce nuisance alarms. “Latching Alarm Indication” remembers which unit initiated an alarm.When interconnected in a series, the unit that triggered the alarm rapidly flashes its red LED indicator. After the alarm condition subsides, the initiating unit will store in memory or “latch” the information and begin to flash the green LED indicator 2 seconds on, 2 seconds off. The “Perfect Mount” system features a gasketless base and a mounting bracket that keeps the alarm secure over a wide rotation range to allow for true alignment. This will allow fine-tuning on the positioning to compensate for out of aligned wall studs and to keep the wording level when wall mounting. A Single button test/silence button eliminates confusion. Depending on what mode the alarm is in, pushing the button will test, silence, re-test the alarm when in silence and clear the latching feature. Battery installation and removal can occur while the unit is mounted to the ceiling or wall via the side load battery compartment. Other Contractor Preferred features include a dust cover to keep alarm clean during construction, keyhole slots in the mounting bracket eliminate the need to remove the electrical box screws for installation. Two locking features are provided to prevent battery theft and/or theft of the unit. Connection to AC power is made with a “Quick-Connect” wiring harness. Installation is quick, easy and cost effective. 120VAC, 60Hz Wire-in with 9V Battery Backup (9120B) Smoke AlArm CAT. 9120 SerieS Listed to Standard UL 217 Description: DUAl ioNiZATioN Dual Ionization sensing chamber. Generally more effective at detecting small particles produced by flaming fires. Sources may include paper or kitchen grease. lATCHiNG AlArm iNDiCATor Remembers which unit initiated an alarm. SmArT TeCHNoloGY Helps reduce the number of non- emergency or nuisance alarms. SiNGle BUTToN TeST/SileNCeOne touch button combines both features TWo loCkiNG FeATUreS Pins are provided to lock battery drawer and/ or alarm to base. Great for apartment, dormitory or hotel applications where unauthorized removal of battery or alarm is not desired. Available in the following versions: 9120 AC Alarm with silence 9120B AC Alarm with silence and battery backup 9120AB Same as 9120B but with alkaline battery 9120LB Same as 9120B but with lithium battery 9120B-48P 48 pack of Boxed 9120B 9120B-48B 48 pack of Bulk 9120B 9120B-GFD 18 count Gravity Feed Display 91206CP Contractor Bulk 6-pack of 9120 Alarm 9120B6CP Contractor Bulk 6-pack of 9120B Alarm (9120B only) Smoke AlArm CAT. 9120 SerieS Listed to Standard UL 217 Description: DUAl ioNiZATioN Dual Ionization sensing chamber. Generally more effective at detecting small particles produced by flaming fires. Sources may include paper or kitchen grease. lATCHiNG AlArm iNDiCATor Remembers which unit initiated an alarm. SmArT TeCHNoloGY Helps reduce the number of non- emergency or nuisance alarms. SiNGle BUTToN TeST/SileNCeOne touch button combines both features TWo loCkiNG FeATUreS Pins are provided to lock battery drawer and/ or alarm to base. Great for apartment, dormitory or hotel applications where unauthorized removal of battery or alarm is not desired. Available in the following versions: 9120 AC Alarm with silence 9120B AC Alarm with silence and battery backup 9120AB Same as 9120B but with alkaline battery 9120LB Same as 9120B but with lithium battery 9120B-48P 48 pack of Boxed 9120B 9120B-48B 48 pack of Bulk 9120B 9120B-GFD 18 count Gravity Feed Display 91206CP Contractor Bulk 6-pack of 9120 Alarm 9120B6CP Contractor Bulk 6-pack of 9120B Alarm (9120B only) CAT. 9120 SerieS FRONT SIDE MOUNTING VIEW VIEW BRACKET 5.58" 1.97" ARCHITECTURAL AND ENGINEERING SPEC TOP VIEW SIDE VIEW MOUNTING BRACKET 1. The unit shall be capable of self restoring. 2. A screened sensing chamber to prevent entry of small insects thereby reducing the probability of unwanted nuisance alarms. 3. Powered by 120V AC, 60Hz and have a monitored 9V battery backup model 9120B only). 4. A visual LED (green) power-on indicator to confirm unit is receiving power. 5. A test button to check all alarm functions by simulating a smoke c...


Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории