Оценок - 3, средний балл: 4.3
(
)
)
|
Фрагмент инструкции
Depending on the parameter setup in the fire detection control panel, the detector can operate either as maximum heat detector with an alarm temperature of 55°C, or as rate-of-rise heat detector with a maximum temperature of 55°C. The proven ADM loop technology with Apollo/Discovery Specifications Supply through loop voltage Current consumption max. 250|jA (quiescent) Ambient temperature -20°C to +70°C Relative humidity 0 - 95% (no condensation) Dimensions 0 x H 100 x 42 (mm) Colour white Weight 105g Approval VdS G294029 Order number 242023 Order name Thermal Detector/Anal./XP95/Apo AW-55000-420 protocol establishes a permanent communication between the fire detection control panel and the detector. That ensures a periodical function testing of the detector. Fires are safely detected in the control panel by continuously analysing the measured values. The activated condition of the detector is indicated by a red LED. The detector address is selected by means of a code card in the detector base. Therefore the detector can be changed without additional tools. The detector can be attached to various bases and it can be protected against theft. Building Safety. Building Security. © LABOR STRAUSS SICHERUNGSANLAGENBAU GMBH • A-1231 WIEN • WIEGELESTRASSE 36 • TEL +43 1 52114-0 • FAX. +43 1 52114-27 OFFICE@LST.AT • WWW.LST.AT • ALL RIGHTS RESERVED AW-55000-420 DBL LST EN 0804.PDF • PAGE 1...