Оценок - 3, средний балл: 4.7
(
)
)
|
Фрагмент инструкции
Therefore, immediate response to a fire is imperative. The main objective of the fire detection control panel Series BC216 is to alarm and to react in time and, consequently, save lives and protect property. For decades LST have focused their aims to undertaking unrivaled efforts in order to realize new innovations in the security area. Research, development and production are loca- The Fire Detection Control Panel BC216-1CE is a modularly designed compact control panel in 19“ slide-in technology for small and mid-sized fire detection systems. The extensive functions and features correspond to the Fire Detection Control Panel BC216-1 to the full extent. By installing a Network Interface Module NIF5-1M, the BC216-1CE can be expanded to form a BCnet sectional control panel. The BCnet Sectional Control Panel BC216-3CE is a modularly designed sectional control panel in 19“ slide-in technology without display and operating field („Black Box“ control panel) for the application in a Fire Detection Control Panel BCnet216. All BCnet sectional control panels are connected with each other via a redundant high-security network (the Global Security System network GSSnet). Due to the decentralized structure, the failure safety of the entire system is significantly improved compared to conventi ted within LST premises, thus guaranteeing flexible and reliable individual solutions. Using a 32-bit multiprocessor system, the fire detection control panel Series BC216 ensures topmost efficiency and speed – prerequisites for saving lives and minimizing damage to property. Both versions provide two slots for the connection of function modules (Conventional Detector Interface GIF81 or Loop Interface LIF64-1) to which a total of 16 detector lines in addressable conventional technology or a total of two ADM loops or a combination of the both can be connected. The ADM loop principle offers intelligent analogue ring- bus technology with bi-directional data transfer. Each loop provides for the software-aided administration of up to 198 physical address points in a maximum of 128 detector zones. Addressable conventional technology allows for the connection of automatic and non-automatic fire detectors as well as the unambiguous identification of the activated detector in the event of an alarm. Easy parameterisation on the control panel‘s display and operating unit (BC216-1CE) or by means of a PC software enables you to tailor the control panel to your onally designed fire detection control panels. individual requirements. Building Safety. Building Security. A © LABOR STRAUSS SICHERUNGSANLAGENBAU GMBH • A-1231 WIEN • WIEGELESTRASSE 36 • TEL +43 1 52114-0 • FAX +43 1 52114-27 BC216CE_DBL_LST_EN_0804.PDF • PAGE 1 OFFICE@LST.AT • WWW.LST.AT • ALL RIGHTS RESERVED Clear Concept Clear Concept The compact control panel BC216-1CE and the BCnet sectional control panel BC216-3CE are modularly designed control panels in 19“ slide-in technology. Depending on their configuration, they provide the following features: • The Conventional Detector Interface GIF8-1 permits the connection of automatic detectors and manual call points in conventional technology as well as special detectors with contact output. Individual detector identification can be achieved by means of an optional address module. • Detectors and modules in ADM loop technology can be connected to the Loop Interface LIF64-1. Depending on the parameterisation, either the Apollo/Discovery protocol or the System Sensor/200 protocol is used to achieve bi-directional data transfer. • Since the BCnet216 is compatible to LST fire detection control panels of previous generations, the exchange or expansion of existing systems in conventional technology or ADM loop technology is possible. The existing detector installation can be used without changes. • The optional Fire Brigade Interface FWI2-1 serves for the connection of two independent transmitting devices for a direct interconnection to a designated alarm respondent (e.g., the fire brigade) as well as for the connection of a country-specific fire brigade control unit. By using the Fire Brigade Interface Additional Board FWZ2-1, a line supervision for both of the transmitting devices is accomplished. • Customizable outputs and logical combinations of detectors and detector zones for the activation of external controls and alarming devices facilitate maximum flexibility. Thus, no additional expenses arise for external relays, logic gates or timers. Thanks to the wide range of parameterisation possibilities, individual requirements even under the most difficult ambient conditions can be combined into a reasonable fire protection strategy. • A monitored siren output and dry relay contacts for alarm and fault are available by default. • By integrating input and output modules on any position in the loop you can realize enablements or disablements as well as control tasks in your system without having to care for additional wires. • The free combinat...