After having completed all of the installation steps in the preceding paragraphs, turn on the water all the way and press the ONOFF button (A) located on the control pannel. The appliance is on. Setting and Starting a wash Cycle Select the desired cycle by pressing programme selection button (F). Each time the button is pressed, the seletion cursor"Q"will come on in succession. Choose the wash cycle you feel is most appropriate for the type of dishes that need washing (consult the wash cycle ta

-Carefully dispose of the packing material. -After removing the packing, check to make sure that the appliance is not damaged. If in doubt, contact a qualified professional. -The dishwasher must only be used by adults for the washing of household dishes and cooking utensils. -Fundamental rules to follow when using the appliance: * Never touch the dishwasher when barefoot or with wet hands or feet; * We discourage the use of extension cords and multiple sockets; Close-up View (control panel) * Du

Pots, serving bowls, etc. must always be placed face down (see fig.C) . Deep pots should be slanted to allow the water to flow out. The silverware basket can be doubled (see fig.D) so that only one section may be used when the silverware load is light. This also makes space for additional pots and pans and it can also be placed in the upper rack. Silverware should be placed in the silverware basket with the handles at the bottom; if the rack has side baskets, the spoons should be located individ

To cancel the time delay setting, pressing the Delayed Start button until the delayed start indicator “ E” goes out. Press programme button “ I ” to choose the desired programme. E DF I If the the door is closed, after 5 seconds the delayed start indicator “ E ” lights , the time-remaining indicator “ F ” will blink and decrease , the programme will start until the delayed start indicator “ F ” goes out . Cancelling or modifying a cycle A cycle that is underway can be modified if it has only bee

This appliance complies with the following EEC directives: -73/23/EEC of 19/02/73 (Low Voltage) and subsequent modifications; -89/336/EEC of 03/05/89 (Electromagnetic Compatibility) and subsequent modifications. -Carefully dispose of the packing material. -After removing the packing, check to make sure that the appliance is not damaged. If in doubt, contact a qualified professional. -The dishwasher must only be used by adults for the washing of household dishes and cooking utensils. -The applian

Overall condition of appliance Check that no grease or scale has accumulated on the inside of the dishwasher. If you see any deposits: Clean the interior of the dishwasher thorughly with a detergent solution. Filters The filters “ 8”,“ 9” prevent larger particles of food in the water from reaching the pump.These particles may occasionally block the filters. When the appliance has finished washing, check the filters for particles of food and, if required, clean. After undoing the coarse micro-fil

If necessary, fit a syphon trap (U-bend) with a connecting piece for the drain hose (fig.B). The free end of the hose must be at a height between 40 and 100 cm and must not be immersed in water. fig.B Attention: The connecting piece for syphon trap (U-bend) must be solidly fastened to the wall to prevent the drain hose from moving and allowing water to spill outside the drain. Electrical Connection After making sure that the voltage and frequency values for your home correspond to those on the r

If the appliance is damaged, do not put it into use but contact your supplier or customer service without delay. Please dispose of packaging materials properly. During installation Site the dishwasher and connect it up in accordance with the installation instructions. The dishwasher must not be connected to the electricity supply while installation is being carried out. Ensure that the domestic wiring is properly earthed. The mains electricity supply must conform to the details shown on the dish

Appliance door not closed properly. Programme button has not been pressed. Water tap not turned on. Blocked strainer in water intake hose. -The strainer is situated in the Aquastop or supply-hose connection. Caution Do not forget that repairs should only be carried out by a qualified specialist. Improper repairs can lead to considerable equipment damage as well as danger to the user. ...with the appliance itself Error display on the time-remaining indicator When all the programme indicators “ C”

B1 C1 C2 C3 C5 C6 A Moving the Appliance If the appliance must be moved, try to keep it in a vertical position. If absolutely necessary, it can be positioned on its back. Seals One of the factors that cause odors to form in the dishwasher is food that remains trapped in the seals. Periodic cleaning with a damp sponge will prevent this from occurring. The door should not be left in the open position since this could present a tripping hazard. When You Go on Holiday When you go on holiday, it is r