Ensure surfaces are dry and dust free prior to application.

A “Y” branch tailpiece and connector kit, not included, will make this method easier and includes all needed fittings and instructions. See Figure 7. Figure 8 Figure 7 Finishing the Drain 7 Connection 6. Move unit back in place while routing drain hose through access hole. Use caution to prevent damage to the dishwasher, floor and cabinets. IMPORTANT: Make sure there are no sharp bends or kinks that might restrict drain flow. 7. Secure drain hose to sink drain, disposer, or separate trap with a

This guide will help you anticipate drain, water, and electrical connections, and help you select the best location for the dishwasher. Tip Over Hazard Do not use dishwasher until completely installed. Do not push down on open door. Failure to follow this warning can result in serious injury. Installation Tips 1 Tools and Materials Needed for Installation (Not Included) • Drill, Electric • Driver, Socket 5/32”, 1/4” , 5/16” • Flaring Tool / Tube Cutter (for copper tubing) • Flashlight • Level •

This happens even when HI-TEMP WASH option has not been selected. When HITEMP WASH is selected, an even higher temperature will be guaranteed to handle heavier soil loads. 4 Operating Instructions (continued) Cycle Chart Cycle To Select Cycle Water (approx.) Time* (min.) Washes/ Rinses For pots, pans, casseroles and dinnerware with dried-on or baked-on soils. Pots Pans Select POTS PANS and desired OPTIONS. HI-TEMP WASH and SANITIZE will automatically be provided. gal.8.5 105 2 washes 5 rinses Fo

3 Normal Operating Sounds ................................ 4 Operating Instructions....................... 4-6 Preparing and Loading Dishes................. 6-8 Dishwasher Dispenser and Detergents ................9-10 Factors Affecting Performance ...................... 10 Care and Cleaning ............................. 11 Connecting Portable Dishwasher ........................ 12 Solutions to Common Dishwashing Problems...13-15 Consumer Services Warranty & Service ..............................

gal. liters 6.0 5.0 22.7 78 min.* 2 washes 3 rinses Short Wash For lightly soiled or pre-rinsed dishes and silverware. • Turn dial to SHORT WASH. • Select desired OPTIONS. gal. imp. gal. liters 4.8 4.0 18.2 71 min.* 1 wash 3 rinses Rinse/ Hold For rinsing dishes that will be washed later. • DO NOT USE detergent. • Turn dial to RINSE/HOLD. • Select SANITIZE OFF and HEAT DRY OFF. gal. imp. gal. liters 1.2 1.0 4.5 12 min. 1 rinse 750 Series Energy Options Hi-Temp Wash Option When HI-TEMP WASH ON op

Avoid mixing stainless steel and silver. Etching • Using too much detergent in soft or softened water causes this film that cannot be removed. • Adjust the amount of detergent based on the water hardness. (Check Detergent Chart.) • Lower the water temperature. • Use the Heat Dry Off option. Detergent Left in Cups • Detergent may be old. Discard and use fresh detergent. • Be sure water action can reach the dispenser. • Check to see if cycle has been completed. • Make sure items do not prevent the

. Accessorie. . Important Safety Instruction. . Control Function. . Primary Control Button. . Loc. . Electronic Displa. 1. Secondary Control Pane. 1. Operating Instruction. 1. Usag. 1. DishDrawer Accessorie. 1. Purpose of Each Inser. 1. DishDrawer Loadin. 1. Loading Pattern for 10 Place Setting. 1. Detergent & Rinse Agent Dispense. 1. Detergent Compartment. 1. Rinse Agent Dispense. 2. Option Adjustment Mod. 2. Rinse Agent Settin. 2. Auto Powe. 2. Water Pressur. 2. Wash Program. 2. Installation o