Оценок - 4, средний балл: 4
(
)
)
|
Фрагмент инструкции
•Only run the dishwasher when fully loaded. •Place hollow items (bowls, glasses and pans) face down in the basket. •Do not put dishes or cutlery with tobacco ash, wax, lubricating grease or paint residues in the dishwasher. Before First Use •Set the water softener level as required by the water hardness in the area. •Add 2kg of salt into the salt compartment and then fill with water to the top of the salt compartment. •Remove all the packaging materials from the interior of the dishwasher. •Fill the rinse aid compartment. •Run a hot programme without any dishes in the dishwasher. Control Panel Programme indicator lights Programme selection button Salt indicator light Quickwash indicator light Delay timer indicator lights Delay timer button Power button Starting a Programme • Turn on the water tap • Press the Power button. • Press the Programme Selection button until the required programme light is illuminated. When you close the door, the dishwasher will beep once and the programme will start automatically. The Delay Timer This dishwasher is equipped with a variable delay timer which can be set for 2, 4, 6, 8, 10 or 12 hours’ duration. • To set the delay timer, first switch the dishwasher on by pressing the power button. Then press the delay timer button. The delay timer will switch on and the selected delay timer indicator will illuminate. • To change the duration, press the delay timer button again until the required time is shown on the indicators as shown below. • Once the delay timer is set, then select the programme as described above. • To cancel the delay timer before the programme has begun, press the delay timer button repeatedly until all the indicator lights go out. Quick wash function This dishwasher is equipped with a function that reduces the duration of the wash, minimising water and energy consumption. • To set the quick wash function, select a programme as described above and then press the quick wash button so the quick wash indicator light is illuminated. • To cancel the quick wash function before the programme has begun, press the quick wash button and the quick wash indicator light will go out. Cancelling or Changing a programme If possible do not open the dishwasher door once the programme has started. If it is necessary to cancel or change a programme once it has started, follow the steps below: • First open the door slightly to reduce the risk of water spillage. • Press the Programme Selection button for approximately three seconds until the Programme Indicators go out. • Close the dishwasher door to allow the dishwasher to run a drain cycle. Once the drain cycle is complete, the dishwasher can now be set to a new programme if necessary. Please note: If the cancelled programme has already used the detergent and drained the wash water, the detergent dispenser must be refilled. At the End of a Programme When the dishwasher programme is complete, the dishwasher will beep six times and the Programme Indicators will go out. Open the dishwasher door. • Press the Power button to switch off the dishwasher. • Turn off the water tap and remove the plug from the power socket. Please note: The dishwasher will automatically continue on the programme it has started if the door is opened or in the event of a power cut. Detergent To fill the detergent dispenser 1. Push the latch to open the dispenser. 2. Add the required amount of detergent to the main detergent dispenser. If your dishes are in need of an intensive wash, then add 5 cm3 of detergent into the prewash section of the dispenser. 3. Then close the detergent dispenser lid until the latch locks. Please note: You should only use detergents designed specifically for use in dishwashers. Combination detergents (e.g. 3-in-1 tablets) must not be used in any quick wash programme. If using dishwasher tablets, always use the detergent compartment, do not put them in the main body of the dishwasher or in the cutlery basket. The solubility of dishwasher tablets can vary depending on the temperature and duration of the programme. As a result, it is recommended that powder detergents should be used in the shorter programmes to allow better performance. CDA recommends the use of separate detergent, rinse aid and dishwasher salt rather than combination tablets as separates achieve better wash performance. If you do use combination detergents, add salt and rinse aid to the dishwasher and then adjust the water hardness setting and rinse aid setting to the minimum. When you then use separate detergents again, you should fill the salt and rinse aid compartments, adjust the water hardness setting to the maximum and run an empty wash, then adjust the water hardness setting and the rinse aid setting to the appropriate level. Salt To ensure the best efficiency, the dishwasher needs soft water. Hard water means that lime residues remain on the dishes and the interior of the dishwasher, affecting performance. The softener system is designed to remove the ions that...
Эта инструкция также подходит к моделям:Посудомоечные машины - WC430 (1.01 mb)
Посудомоечные машины - WC430 (1.01 mb)