Оценок - 2, средний балл: 4.5
(
)
)
|
Фрагмент инструкции
Changing a program If the detergent flap is already open do not change the program. If a program has already started and you wish to change it: Sensor Wash Rinse 1:30 h Cancel Select Cancel and confirm with "OK". The program is canceled. Sensor Wash End Back . Select Back and confirm with "OK" . The display changes to the program menu. . Select and start the desired program as usual. Additional options Delay Start . Press the "Start" button. The starting time of a program can be delayed between 15 minutes and 24 hours. The start can be delayed in 15-minute-increments. When using the "Delay Start" function make sure that the detergent compartment is dry before adding detergent, use a cloth if necessary. The detergent might stick together and not get completely rinsed out. Do not use liquid detergent when selecting "Delay Start", the detergent could leak out of the compartment. . Turn the dishwasher on . The "Start" indicator flashes. . Select the desired program. . Press the . button. The display shows the current time of day, the last selected start time and the program end time. The . indicator lights. 12:00 Start time: 8:00pm End: 9:32pm . Select the desired start time. Holding the button automatically increases or decreases the time. The end time will be automatically adjusted. . Confirm with "OK". The display changes to the program menu. Sensor Wash Start at: 8:00pm Cancel The program name and the start time are displayed. The indicators "Start" and . light. The program starts automatically at the selected time. The . indicator goes out. Starting a program before the delay start has elapsed: A program can be started before the delay start time has elapsed. . Select Cancel and confirm with "OK". The . indicator goes out. The program selection is displayed and the "Start" indicator flashes. . Select and start the desired program. The program starts and the "Start" indicator lights. Settings . The "Settings " menu allows you to adjust standard settings. Opening the Settings . menu . Turn the dishwasher on by pressing the " " button. The main menu shows in the display. If the memory function is selected, the last selected program is displayed. See "Settings . -Memory". Select Back to switch to the program selection. Settings ... Normal China & Crystal . Scroll down in the list to Settings . and confirm with "OK". The display changes into the menu "Settings ". . Select the desired submenu and confirm with "OK". The selected options in the submenus are marked with a check . Press the . button to see more information about the program currently selected. Language . The display contents can be shown in different languages. The displayed language can be changed in the submenu "Language ". . Select the desired language and confirm with "OK". The flag behind the word "Language " serves as a guide when an unfamiliar language is selected. In this case select the respective menu with a flag until the flag shows in the left column of the display. The submenu "Language "isnow shown. Settings . Time of day . This selection allows the clock to be shown as 24 or 12 hours. The clock can also be set from here. Setting the clock format . Select the desired clock format and confirm with "OK". The display changes to the time of day setting. Set the time of day . Set the hour and confirm with "OK". Set the minutes and confirm. The display changes back to the previous menu. To switch back to "Settings " -select Back. Detergent . To achieve best results the used detergent can be set on your dishwasher. The selections available are "Powder", "Gel" and "Tab". The program cycle sequence will be adjusted for the selected detergent. Depending on the program the program running time could increase. Powder When using powder detergent, salt and rinse aid must be added for best results. See "Filling the salt container" and "Rinse aid" for more info. The rinse aid refill message is activated. Gel When using gel detergent, salt and rinse aid should be added for best results. See "Filling the salt container" and "Rinse aid" for more info. The rinse aid refill message is activated. Tab If the "Tab" indicator is lit than the program sequence is adapted to suit detergents than contain rinse aid and salt (as well as other components where applicable). The rinse aid dispenser and indicator light are deactivated. Follow the instructions of the detergent manufacturer. The cleaning and drying performance of these detergent products vary. The detergent selection is set by default to "Powder" detergent. . Select the desired detergent and confirm with "OK". Settings . Water hardness The water hardness level set can be viewed under the submenu "Water hardness". . Press "OK" to return to the "Settings " menu. To reset the water hardness see "Settings . -External water softener". External water softener Set the dishwasher to the hardness of your local water supply (see "Before using for the first time"). If the dishwasher is connected to an external wa...