Оценок - 3, средний балл: 4.3
(
)
)
|
Фрагмент инструкции
The detergent selection is set by default to "Powder" detergent. . Select the desired detergent and confirm with OK. Settings . Drying Plus The Drying plus function automatically opens the door slightly at the end of a program, in order to improve the drying process. This function can also be deactivated. . Select the desired setting and confirm with OK. Water hardness The water hardness level set can be viewed under the submenu "Water hardness". . Press "OK" to return to the "Settings " menu. To reset the water hardness see "External water softener". External water softener Set the dishwasher to the hardness of your local water supply (see "Before using for the first time"). If the dishwasher is connected to an external water softening unit which is regenerated with salt, set the dishwasher to the water hardness of the external water softener. . Select the water hardness setting using , confirm with OK. °d gr/gal Setting in display 1 1 1 2 2 2 3 3 3 4 4 4 6 6 6 7 7 7 8 8 8 9 9 9 11 11 11 12 12 12 13 13 13 14 14 14 16 16 16 17 17 17 18 18 18 19 19 19 21 21 21 22 22 22 23 23 23 24 24 26 26 27 26 27 28 27 28 29 28 29 29 31 31 32 31 32 33 32 33 34 33 34 34 36 36 37 36 37-45 38-46 45 46-60 47-62 60 61-70 63-73 70 Settings . Rinse aid For best results the rinse aid dosage can be adjusted. The dosage can be set between 0 and 6 ml. The dosage set by default to 3 ml of rinse aid per program. – Use a higher setting if spots appear on dry glassware. – Use a lower setting if streaking appears on dishes or glasses. . Use the +/-buttons to selected the desired rinse aid amount and confirm with OK. Filter check This selection allows you to set the number of cycles run before the filter check message shows. You can select between 30 and 60 cycles. The filter check message is set by default to 40 cycles. . Select the desired number of cycles and confirm with OK. See "Cleaning and Care -Triple filter system" for more information. Adjust Sensor Wash The "Sensor Wash" program can be adjusted to clean stubborn but normal soiling. . Select Yes and confirm with OK . Settings . Reorganize program list The order of the programs in the program list can be reorganized. The two most frequently used programs can be saved to the first two positions. Sensor Wash Cancel Select program for position 1 Continue . Select with . the program which you would like to save to the first position of the main menu. Confirm the selection with the button next to the program. . Confirm with Continue. . Repeat with the second program. The selected programs are shown summarized. To change a program position, select Back until you reach the respective program position. . When finished reorganizing the program list, confirm with Finished. Settings . Save options Additional options can be selected for some programs, e.g. extended drying. See "Use -Selecting options". Save options allows you to save the selected options for future use of the program. This function is turned off by default. . Select the desired setting and confirm with OK. Temperature The temperature can be displayed in "°C/Celsius" or "°F/Fahrenheit". The temperatures are shown in °C/Celsius by default. . Select the desired temperature unit and confirm with OK. Settings . Buzzer When the buzzer is activated, a tone sounds at the end of a program and if a fault occurs. The buzzer at the end of a program is turned on by default. Buzzer at the end of a program The buzzer at the end of a program sounds five times in intervals with a brief break in between. The buzzer sounds up to one hour if the dishwasher in not turned off. Buzzer in case of a fault The buzzer for a fault sounds continuously. The buzzer sounds up to two minutes if the dishwasher is not turned off or the fault is fixed. The buzzer for a fault cannot be set to off. Buzzer volume Two buzzer volumes can be selected or the buzzer can be turned off. Off The buzzer tone at the end of a program is turned off. Soft The tone sounds in a soft volume. Loud The tone sounds in a loud volume. . Select the desired volume or deactivate the buzzer. . Confirm with OK. Settings . Button tone A tone will sound when a button is pressed. The volume can be set to seventeen different levels. It is set to level 8 by default. . Select the desired setting and confirm with OK. Brightness The display brightness can be adjusted in 17 levels. The brightness is set to level 9 by default. . Select the desired brightness and confirm with OK. Memory The memory function allows you to save the last selected program. When turning the dishwasher off and on again after a program has finished or opening and closing the door, the last selected program is displayed instead of the main menu. The function is turned on by default. . Select the desired option and confirm with OK. RemoteVision (Optional accessory. To learn more about RemoteVision visit . Select . to show module state. If ". module connected and ready" is displayed, no further action is requi...