Оценок - 3, средний балл: 3.7
(
)
)
|
Фрагмент инструкции
O. Box 4183 2674 N. Service Road Winston-Salem, North Carolina 27115-4149 Jordan Station, Ontario, Canada L0R 1S0336/661-1992 Fax: 336/661-1660 905/562-4195 Fax: 905/562-4618 Complete the information below for quick reference. Model Number Serial Number Voltage and Phase Moyer Diebel Parts Supplier Phone Moyer Diebel Service Agency Phone Moyer Diebel Service: Moyer Diebel (USA) Moyer Diebel Limited (Canada) Phone: 1 (336) 661-1556 Phone: 1 (905) 562-4195 1 (800) 858-4477 1 (800) 263-5798 Fax: 1 (336) 661-1660 Fax: 1 (905) 562-4618 Note: When calling to order parts, be sure to have the model number, serial number, voltage and phase of your machine. AFTER S/N 45420 Machine Data Plate with model & serial number located on the lower left side of the machine. S/N 45368-45419 Machine Data Plate with model & serial number located on the lower right side of the machine. COPYRIGHT © 2005 by Moyer Diebel (USA). All Rights Reserved. REVISION RECORD Revision Record Revision Date Revised Pages Serial Number Effectivity Comments 7/3/03 All —— First issue of manual and replacement parts lists 10/2/03 2, 30-31 Inserted pressure reducing valve information (107550). 10/14/03 22-23 Inserted rinse aid dispenser parts breakdown information. 10/14/03 33 Revised part number for solenoid valve. 2/11/04 16 Revised part number for door support. 8/4/04 14-15 Added new hardware for panels. 8/4/04 16-17 Added new hardware for control cabinet decal. 1/18/05 14 Added door gasket H36353. 1/18/05 16-17 Added part numbers for hardware. 1/18/05 21 Replaced P/N 436348 with 113604 and H36157 with 0510821. 1/18/05 23 Added P/N’s for rinse aid and detergent labels. 1/18/05 31 Replaced P/N H33402 with 109985. 1/18/05 36-37 54257-54304 Added new control panel. 6/6/05 16-17 60605 Added new drawing and part numbers to door rod plate. REVISION RECORD Revision Record (Cont.’) LIMITED WARRANTY Limited Warranty Moyer Diebel, P.O. Box 4183, Winston-Salem, North Carolina 27115, and P. O. Box 301, 2674 North Service Road, Jordan Station, Ontario, Canada L0R 1S0 warrants machines, and parts, as set out below. Warranty of Machines: Moyer Diebel warrants all new machines of its manufacture bearing the name “Moyer Diebel” and installed within the United States and Canada to be free from defects in material and workmanship for a period of one (1) year after the date of installation or fifteen (15) months after the date of shipment by Moyer Diebel, whichever occurs first. [See below for special provisions relating to Model Series DF and SW.] The warranty registration card must be returned to Moyer Diebel within ten (10) days after installation. If warranty card is not returned to Moyer Diebel within such period, the warranty will expire after one year from the date of shipment. Moyer Diebel will not assume any responsibility for extra costs for installation in any area where there are jurisdictional problems with local trades or unions. If a defect in workmanship or material is found to exist within the warranty period, Moyer Diebel, at its election, will either repair or replace the defective machine or accept return of the machine for full credit; provided, however, as to Model Series DF and SW, Moyer Diebel’s obligation with respect to labor associated with any repairs shall end (a) 120 days after shipment, or (b) 90 days after installation, whichever occurs first. In the event that Moyer Diebel elects to repair, the labor and work to be performed in connection with the warranty shall be done during regular working hours by a Moyer Diebel authorized service technician. Defective parts become the property of Moyer Diebel. Use of replacement parts not authorized by Moyer Diebel will relieve Moyer Diebel of all further liability in connection with its warranty. In no event will Moyer Diebel’s warranty obligation exceed Moyer Diebel’s charge for the machine. The following are not covered by Moyer Diebel’s warranty: a. Lighting of gas pilots or burners. b. Cleaning of gas lines. c. Replacement of fuses or resetting of overload breakers. d. Adjustment of thermostats. e. Adjustment of clutches. f. Opening or closing of utility supply valves or switching of electrical supply current. g. Adjustments to chemical dispensing equipment. h. Cleaning of valves, strainers, screens, nozzles, or spray pipes. i. Performance of regular maintenance and cleaning as outlined in operator’s guide. j. Damages resulting from water conditions, accidents, alterations, improper use, abuse, tampering, improper installation, or failure to follow maintenance and operation procedures. Examples of the defects not covered by warranty include, but are not limited to: (1) Damage to the exterior or interior finish as a result of the above, (2) Use with utility service other than that designated on the rating plate, (3) Improper connection to utility service, (4) Inadequate or excessive water pressure, (5) Corrosion from chemicals dispensed in excess of recommended concentration...