Оценок - 2, средний балл: 4.5
(
)
)
|
Фрагмент инструкции
Do not modify the plug provided with the appliance; if it will not fit the outlet, have a proper outlet installed by a qualified electrician. 16 Installation Instructions Important - Take care when handling the dishwasher to avoid potential injury due to possibly exposed sharp edges. Unpack the Dishwasher • Remove carton and any internal packaging material from within the dishwasher. • Unclip the power cord, fill and drain hoses from the rear. • Carefully lay dishwasher on its back taking care not to damage hoses or power cord and remove the wooden pallet by removing the 4 screws in the base. • Open the dishwasher door and remove the two screws securing the press-board top panel. Preparation of the Cabinet • See below for dimensions of cabinet opening and dishwasher. • Connection points for electrical, water and drain lines must be situated in an adjacent cabinet for easy access and within dimensional specifications. • The floor within the cabinet opening must be at the same height as the floor surface in the surrounding room area. Cabinet Opening Dimensions Width 23 5/8" min. to 24" max. Depth 22" min. Height 32 3/8" min. to 34 5/8" max. Connections Electrical: Locate power outlet within 3' of the cabinet partition adjacent to the dishwasher. Water: Locate water shut-off valve within 2' of the cabinet partition adjacent to the dishwasher. Drain: Locate the drain line connection point within 1' of the cabinet partition adjacent to the dishwasher. 17 Installation Instructions Preparation of the Dishwasher Fitting the Adjustable Feet • The dishwasher comes pre-fitted with adjustable feet. • Adjust the feet as needed to: 1. Obtain the desired overall machine height. 2. Properly level the dishwasher. Important: The dishwasher must be completely level in its finally installed position for proper door sealing and dishwasher operation. Fitting a Decorative Door Panel To enhance the appearance of the dishwasher, a decorative door panel can be installed within the existing outer door frame. The acceptable dimensions of a locally sourced insert panel are: Width: 23 1/8" Height: 23 1/2" Thickness: 1/8" max. Procedure: • Remove the door frame from the dishwasher by loosening the screws as shown in the illustration. • Prepare the panel according to the measurements given. • Position the panel you have chosen and tighten the screws back into the frames. 18 OR Washer Shut - off Valve 3/4" NPT Water Supply Hose Water Supply Hose OR Washer Shut - off Valve 3/4" NPT Water Supply Hose Water Supply Hose Installation Instructions Electrical Connection • The dishwasher requires a dedicated grounded electrical supply rated at 120 VAC, 15 amps, 60Hz. • The dishwasher is pre-fitted with a flexible power supply cord with a three-prong, grounding-type plug to connect to a grounded outlet. • The power-supply receptacle for the dishwasher must be installed in a cabinet or on a wall adjacent to the undercounter space in which the appliance is to be installed. • Provide an opening, not to exceed a maximum 11/ 2" (38 mm) diameter, through the cabinet partition for the attachment plug and cord to pass through. • Suitably treat the edges of the specified opening as follows: • Wood cabinet: Edges must be smooth and rounded. • Metal cabinet: Order special grommet, the Service Center. • Take care when installing or removing the dishwasher to avoid possible damage to the power-supply cord. Water Connection • The dishwasher is pre-fitted with a direction- adjustable high-pressure water supply hose that has 3/4" NPT internal pipe threads. • For your convenience, supplied with the dishwasher is a 3/8" comp. x 3/4" NPT brass fitting that adapts the hose connector to a standard 3/8" compression fitting common to most household dishwasher water supply shut-off valves. As an alternative the hose can be connected directly to a locally sourced 3/4" NPT male brass connector available in most hardware stores. • Adjust the direction of the hose and its connection as it exits the rear of the machine based on the installation requirements. Important: Ensure the hose connector on the rear of the dishwasher is fully tightened before installing. Shut - off Valve 3/8" Comp. x 3/4" BSP 19 Installation Instructions Drain Connection • Connect the pre-fitted drain hose to either a garbage...
Эта инструкция также подходит к моделям:Посудомоечные машины - BB65 (1.26 mb)
Посудомоечные машины - BB65 (1.26 mb)
Посудомоечные машины - SB65 (1.26 mb)
Посудомоечные машины - WB 65 (1.26 mb)