Оценок - 2, средний балл: 5
(
)
)
|
Фрагмент инструкции
00 7 POWER CUTS 8 BASIC RECCOMMENDATIONS a b c d END APPLIANCE MAINTENANCE AND CLEANING DISHWASHERIMPORTANT If you plan to be away for a long period, leave your dishwasher open to let air circulate freely inside the machine. 1 WASH FILTER CLEANING a b c ba dc d APPLIANCE MAINTENANCE AND CLEANING DISHWASHERIMPORTANT If you plan to be away for a long period, leave your dishwasher open to let air circulate freely inside the machine. 1 WASH FILTER CLEANING a b c ba dc d 2 WATER SPRAY ARM CLEANING 4 CLEANING THE OUTSIDE OF THE MACHINE IMPOR TANT Before carrying out any cleaning operations, it is recommended to unplug the dishwasher. a b c a c b 3 CLEANING INSIDE THE MACHINE IMPOR TANT For safety reasons, check that the machine is not in operation during the cleaning. 2 WATER SPRAY ARM CLEANING 4 CLEANING THE OUTSIDE OF THE MACHINE IMPOR TANT Before carrying out any cleaning operations, it is recommended to unplug the dishwasher. a b c a c b 3 CLEANING INSIDE THE MACHINE IMPOR TANT For safety reasons, check that the machine is not in operation during the cleaning. TROUBLESHOOTING DISHWASHER1 TECHNICAL OR FUNCTIONAL PROBLEMS DYSFUNCTION Close the door F1 1 MODEL WITH DISPLAY NO OF BEEPS MODEL WITHOUT DISPLAY No water entering F2 2 No drainage F3 3 Overflow F4 4 Overteating F5 5 No heating F6 6 No temperature detection F7 7 Lack of water pressure F8 8 Does not distribute F9 9 TROUBLESHOOTING DISHWASHER1 TECHNICAL OR FUNCTIONAL PROBLEMS DYSFUNCTION Close the door F1 1 MODEL WITH DISPLAY NO OF BEEPS MODEL WITHOUT DISPLAY No water entering F2 2 No drainage F3 3 Overflow F4 4 Overteating F5 5 No heating F6 6 No temperature detection F7 7 Lack of water pressure F8 8 Does not distribute F9 9 (F1) 1 • Why does the dishwasher not start? This could be because: - There is no electricity supply. - It is not plugged in properly- The fuses have tripped- The dishwasher is not connected to the electricity supply- You have not pressed the On/Off button (the indicator light for this button must becontinuously lit) - The dishwasher door is not closed properly. - The start button has not been pressed. • The dishwasher starts but no water entersThis could be because: - There is no water in the network. - The stopcock is not open- The water inlet solenoid valve filter is obstructed. • It does not drain, water remains inside. This could be because: - The drainage is obstructed or badly installed. - The drain pipe is obstructed or folded- The filters are blocked- The selected program has not finished, wait for it to finish. • There are detergent remains in the dispenser or on the doorThis could be because: - A dish is preventing the dispenser from opening- The detergent is past its expiry date or is not appropriate- The water spray arms are hitting a dish- The water spray arm holes are covered. - The detergent compartment was damp when the detergent was put it. The compartmentmust be dry. • Unusual foam is formed: - You have put in washing up liquid instead of dishwasher deter...
Эта инструкция также подходит к моделям:Посудомоечные машины - LFA-073 SS (958.16 kb)
Посудомоечные машины - LFA-073 IT (958.16 kb)
Посудомоечные машины - LFA-65 ITX (958.16 kb)
Посудомоечные машины - LFA-65 SS (958.16 kb)