Оценок - 3, средний балл: 4
(
)
)
|
Фрагмент инструкции
This will allow you to save on water and electricity. It can be used before setting any of the wash cycles. Please keep in mind that the amount of detergent should also be cut in half. GB .6. Energy Saving Tips -It is important to try and run the dishwasher when it is fully loaded to save on energy. In order to prevent odors from forming and food from caking onto the dishes, you can run the soak cycle. -Choose the right wash cycle: the choice of cycle depends on the type of dishware, cookware and utensils being washed and how dirty they are. -Use the right amount of detergent: if you use too much detergent, the result will not be cleaner dishes, but, rather, a greater negative impact on the environment. -There is no advantage in rinsing dishes, cookware and utensils before placing them in the dishwasher. How to Keep Your Dishwasher in Shape After Every Wash After every wash, turn off the water supply to the appliance and leave the door slightly ajar so that moisture and odors are not trapped inside. Remove the Plug Before cleaning or performing maintenance, always remove the plug from the socket. No Solvents or Abrasive Cleaning Products To clean the exterior and rubber parts of the dishwasher, do not use solvents or abrasive cleaning products. Use only a cloth and warm soapy water. To remove spots or stains from the surface of the interior, use a cloth dampened with water and a little white vinegar, or a cleaning product made specifically for dishwasher. Moving the Appliance If the appliance must be moved, try to keep it in the vertical position. If absolutely necessary, it can be positioned on its back. Seals One of the factors that cause odors to form in the dishwasher is food that remains trapped in the seals. Periodic cleaning with a sponge will prevent this from occurring. When You Go on Holiday When you go on holiday, it is recommended that you run a wash cycle with the dishwasher empty and then remove the plug from the socket, turn off the water supply and leave the door of the appliance slightly ajar. This will help the seals last longer and prevent odors from forming within the appliance. .7. GB Wash Cycle Table Cycle Button Cycle Selection Information Description of Cycle Detergent Rinse Aid Heavy Duty Very dirty dishes, pots and pans. (Not to be used with delicate items) Pre-wash with hot water. Extended wash at 58 . Rinse with cold water. Rinse with hot water. Drying. 30g Heavy Duty (EN50242) Very dirty dishes, pots and pans. (Not to be used with delicate items) Pre-wash with hot water. Extended wash at 53 . Rinse with cold water. Rinse with hot water. Drying. 25+5g Normal Wash Normally dirty dishes, pots and pans. Standard daily cycle. Extended wash at 58 . Rinse with cold water. Rinse with hot water. Drying. 30g Normal Wash Normally dirty dishes, pots and pans. Standard daily cycle. Extended wash at 53 . Rinse with cold water. Rinse with hot water. Drying. 30g Rinse For dishes that need to be rinsed and dried only. Rinse with cold water. Rinse with hot water at 58 Drying. Rinse For dishes that need to be rinsed and dried only. Rinse with cold water. Rinse with hot water at 53 Drying. Rapid Wash Economic,fast cycle to be used to on not very dirty dishes right after they are used. No drying cycle. Short wash at 55 . Cold rinse. 15g Rapid Wash Economic,fast cycle to be used to on not very dirty dishes right after they are used. No drying cycle. Short wash at 50 . Cold rinse. 15g Soak Pre-wash of dishes, pots and pans while waiting for the load to be completed after the subsequent meal. Short cold wash to prevent food residue from drying on the dishes GB .8. Cleaning and Special Maintenance Filter Assembly For best performance and results, the filter assembly must be cleaned. The filter efficiently removes food particles from the wash water, allowing it to be recirculated during the cycle. For this reason, it is a good idea to remove the larger food particles trapped in the filter after each wash cycle by rinsing the "A" semi-circular filter and cup under running water. To remove the filter assembly, pull on the cup handle in an upward direction. The entire filter assembly (made up of the "A" semicircular filter and the "B" fine filter) should be cleaned at least once a month. To clean the filter and the fine filter, use a cleaning brush. Then, reassemble the filter parts as shown in the figures below and inset the entire assembly in the dishwasher, positioning in its seat and pressing downward. The dishwasher must never be used without the filters. Improper replacement of the filters may reduce performance of the appliance and damage dishes and utensils. Cleaning the Spray Arms It may happen that food particles become encrusted on the sprayer arms and block the hole (see "Close up view [interior]" , letters C-E ). Check the sprayer arms periodically and clean them when needed. A B Cleaning the Water Inlet Filter Periodically clean the water inlet filter located on the outlet of the water supply ...
Эта инструкция также подходит к моделям:Посудомоечные машины - DW12-BFM ME (394.51 kb)