|
Фрагмент инструкции
Regulated power infrared gas immersion tube system is optional at extra cost. A solid-state igniter board controls the gas valve and provides flame ignition. A transformer steps the control circuit voltage down to 24 volts to power the igniter board and gas valves. Gas Heated Dishwasher: For natural gas, gas pressure (customer connection) not to exceed 7" W.C. For liquefied petroleum, gas pressure to burner (customer connection) not to exceed 11" W.C. If gas pressure is higher than 7" W.C. natural or 11" W.C. LP, a pressure regulating valve must be supplied (by others) in the gas line to the dishwasher. Water temperature regulation is controlled by thermistor sensor in combination with microcomputer controls. The tank heat and positive low water protection microcomputer circuits are automatically activated when the main power switch is turned “on”. If tank is accidentally drained, low water protection device automatically turns heat off. Gas immersion tube is additionally protected by a high limit device mounted on the surface of the tube. These features are standard with the Hobart Microcomputer Control System. OPTIONAL EQUIPMENT AT EXTRA COST – ELECTRIC BOOSTER HEATER: Electric booster with Sense-A-TempTM technology adequately sized to raise 110°F inlet water to 180°F (not available on gas heat machines). ACCESSORIES: 193.4" x 193.4" peg and combination dish racks. Sheet pan rack. Splash shield for corner installations. End of cycle audible alarm (field activated). Delime notification (field activated). Desirable functional accessories can be furnished at added cost. See listed options and accessories on this specification sheet. Write to the factory for special requirements not listed above. F-40079 (REV. 05/11) LITHO IN U.S.A. (H-01) ...
Эта инструкция также подходит к моделям:Посудомоечные машины - 208-240/60/3 (832.57 kb)
Посудомоечные машины - AM15T (832.57 kb)
Посудомоечные машины - 380-415/50/3* (832.57 kb)
Посудомоечные машины - 480/60/3 (832.57 kb)