Оценок - 4, средний балл: 4.3
(
)
)
|
Фрагмент инструкции
If you are using salts that take longer to dissolve then this can take longer. The function of the machine is not affected. Do not worry if water over flows from the unit when filling with salt, this is quite normal. Operating instructions Rinse aid Rinse aid is automatically added during the last rinse, ensuring thorough rinsing, and spot and streak free drying. The dispenser, which is positioned inside the door, holds about 110 ml of rinse aid, which is sufficient for 16 - 40 dishwashing programmes, depending upon the dosage setting. Rinse aid can be added in one of two ways: . If you are using dishwasher detergent that already integrates the rinse aid function, this must be placed in the detergent compartment. -In this case the rinse aid compartment must be empty. If in the rinse aid dispenser there is still rinse aid you must wait until it has finished before using detergent that contains rinse aid. . If you are using dishwasher detergent and rinse aid separately, the rinse aid is to be put into the rinse aid dispenser. -In this case the rinse aid dosage must be set in position from 1 to 6 (see "Adjusting the dose"). Filling with rinse aid (Rinse aid dispenser type A) 1. Open the container by pressing the release button (A). 2. Fill with rinse aid exactly up to the level indicator marked "max". BR07 BR14 Ensure that the lid is closed after every refill. Operating instructions Top up with rinse aid when the indicator (B) becomes clear, Adjusting the dose According to the finish and drying results obtained, adjust the dose of rinse aid by means of the 6 position selector (position 1 minimum dosage, position 6 maximum dosage). Increase the dose if there are drops of water or lime spots on the dishes after washing. The dose is factory set in position 4. Reduce it if there are sticky whitish streaks on the dishes. BR11 BR09 Filling with rinse aid (Rinse aid dispenser type B) 1. Open the container by turning the lid (A) anticlockwise. 2. Fill with rinse aid exactly up to the level indicator marked "max". BR01 BR13 Ensure the lid is closed after every refill. Operating instructions Top up with rinse aid when the indicator (B) becomes clear, Adjusting the dose According to the finish and drying results obtained, adjust the dose of rinse aid by means of the 6 position selector (C) (position 1 minimum dosage, position 6 maximum dosage). Increase the dose if there are drops of water or lime spots on the dishes after washing. The dose is factory set in position 5. Reduce it if there are sticky whitish streaks on the dishes. BR03 BR02 Clean up any rinse aid spilt during filling with an absorbent cloth to avoid excess foaming during the next wash. Only use branded rinse aid for dishwashers. Never fill the rinse aid dispenser with any other substances (e.g. dishwasher cleaning agent, liquid detergent). This would damage the appliance. Operating instructions In daily use • Check if it’s necessary to refill with special salt or rinse aid • Load cutlery and dishes into the dishwasher • Fill with dishwasher detergent • Select a wash programme suitable for the cutlery and dishes • Start the wash programme Loading cutlery and dishes Sponges, household cloths and any object that can absorb water may not be washed in the dishwasher. • Before loading the dishes, you should: -Remove large left-overs. -Soften remnants of burnt food in pans. • When loading the dishes and cutlery, please note: -Dishes and cutlery must not impede the rotation of the spray arms. -Load hollow items such as cups, glasses, pans etc, with the opening downwards so that water cannot collect in the container or a deep base. -Dishes and items of cutlery must not lie inside one another or cover each other. -To avoid damage to glasses, they must not touch. -Lay small objects in the cutlery basket. For washing in the dishwasher the following cutlery/dishes are not suitable: are of limited suitability: •Cutlery with wooden, horn, china or mother-of-pearl handles •Plastic items that are not heat resistant •Older cutlery with glued parts that is not temperature resistant •Bonded cutlery items or dishes •Pewter or copper items •Lead crystal glass •Steel items subject to rusting •Wooden platters •Items made from synthetic fibres •Only wash stoneware in the dishwasher if it is specifically marked as being dishwasher- safe by the manufacturer. •Glazed patterns may fade if machine washed frequently. •Silver and aluminium parts have a tendency to discolour during washing. Left-overs, e.g. egg white, egg yolk and mustard often cause discolouring and staining on silver. •Some types of glass can become dull after a large number of washes. Operating instructions Open the door and slide out the baskets to load the dishes. The lower basket The lower basket is designed to take saucepans, lids, plates, salad bowls, cutlery etc. Serving dishes and large lids should be arranged around the edge of the basket, ensuring that the upper spray arm can turn freely. UI59 UI13 The cutler...