Войти:
Оценок - 4, средний балл: 3.8 ( )

Инструкция по эксплуатации AEG, модель 80850 I

Производитель: AEG
Размер: 534.21 kb
Название файла: 945990en.pdf
Язык инструкции:en
Перейти к скачиванию



Фрагмент инструкции


– Always shut off the water supply at the tap when the dishwasher is not to be used for longer periods, e.g. when you are away on holiday. Operating Instructions • Do not sit or stand on the open door, the appliance may tip over. • In the event of a fault, first close the tap, then switch off the appliance and unplug it from the mains. If the appliance is permanently wired to the mains: switch off the fuse(s) or unscrew them. 2 Disposal Disposing of the Packaging Material Dispose of the dishwasher packaging material correctly. All the packaging materials used are harmless to the environment and can be recycled. • Plastic parts are marked with standard international abbreviations: – >PE< for polyethylene, e.g. sheet wrapping material – >PS< for polystyrene, e.g. padding material (always CFC-free) – >POM< for polyoxymethylene, e.g. plastic clips • Cardboard packaging is manufactured from recycled paper and should be deposited in the waste paper collection for recycling. Disposal of old appliances As and when you cease to use your dishwasher, please take it to a recycling centre or to your dealer who will, for a small contribution to the costs, dispose of it for you. Operating Instructions 2 Economical and Ecological Dishwashing • Only connect the dishwasher to the hot water supply if your hot water is not electrically heated. • Ensure that the water softener is correctly adjusted. • Do not pre-rinse dishes under running water. • If you wash a small load, the load sensor calculates the amount of water necessary and shortens the programme. It is more economical to always wash with a full load. • Select the wash programme to suit the nature and degree of the soiling on the dishes. • Do not use more detergent, special salt or rinse aid than is recommended in these operating instructions and by the manufacturer of the respective product. • The dishwasher's interior light is always switched on as long as the door of the appliance is open. To save energy you should therefore always close the door of the dishwasher after loading or removing dishes. Operating Instructions 9 Appliance Features and Control Panel Top Spray Arm Inlet for Fan Assisted Drying Container for Special Salt Rating Plate Container for Rinse Aid Filters Rubber Seal for Connecting the Water Feed to the Middle Spray Arm Spray Arms Container for Detergent Interior Lighting Operating Instructions Signal Tone Button Control Panel Water Softener Button Control Panel Door Multi-Set Start Handle Display Delay Indicators Air Outlet for Fan Display for the Individual Assisted Drying Wash Programme Steps The Control Panel comprises the ON/OFF switch and the programme buttons with LED indicators. Signal Tone Button: In addition to the wash programme printed on the front panel, this button can be used to set whether a signal tone is to indicate that a wash programme is finished. Water Softener Button: In addition to the wash programme printed on the front panel, this button can be used to adjust the dishwasher's water softener. The Multi-Display can display, – the hardness setting to which the water softener is set. – whether the signal tone is switched on or off. – the start delay that is set. – how long the current wash programme can be expected to last. – which fault has occurred on the dishwasher. The indicators have the following significance : SALT Refill with special salt RINSE AID Refill with rinse aid WATER Open tap FILTER Clean the dishwasher's filter system DOOR The dishwasher door is open SPRAY ARM The middle spray arm is jammed 3 The FILTER indicator is intended to remind you to check the filters in the dishwasher from time to time and, if necessary, to clean it. The indicator illuminates at regular intervals, independent of the amount of soiling of the filters. Operating Instructions Prior to using for the first time Prior to using for the first time, remove all the clips with which the dish racks are secured for transport. Then perform the following steps: 0 1. Adjust the water softener 2. Filling with Special Salt for the Water Softener 3. Filling with Rinse Aid Adjusting the Water Softener To prevent the build up of scale on dishes and in the dishwasher, the dishes must be washed with soft, i.e. low lime content water. For this reason the dishwasher is fitted with a water softener in which tap water from a hardness of 4 °d (German degree) is softened with the aid of special salt. 3 Your water supplier will be able to inform you on the hardness and hardness range of the water in your area. 0 Adjust the water softener to the setting given in the table that corresponds to the hardness of the water in the area where you live. The water softener can be adjusted in 10 steps. Water Hardness Adjust Indication on the in °d1) in mmol/l2) Range to Hardness Setting Multi-Display 41-50 7.3-9.0 9 H 9 35-40 6.3-7.2 8 H 8 31-34 5.5-6.2 IV 7 H 7 27-30 4.8-5.4 6 H 6 23-26 4.1-4.7 5 H 5 19-22 15-18 3.3-4.0 2.6-3.2 III 4 3* H 4 H 3 11-14 1.9-2.5 II 2 H 2 4-10 0.7...


Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории