Войти:
Оценок - 6, средний балл: 4.3 ( )

Инструкция по эксплуатации AEG, модель LFA-013

Производитель: AEG
Размер: 1.1 mb
Название файла:
Язык инструкции:enesfr
Перейти к скачиванию



Фрагмент инструкции


- It is not plugged in properly- The fuses have tripped- The dishwasher is not connected to the electricity supply- You have not pressed the On/Off button (the indicator light for this button must becontinuously lit) - The dishwasher door is not closed properly. - The start button has not been pressed. • The dishwasher starts but no water entersThis could be because: - There is no water in the network. - The stopcock is not open- The water inlet solenoid valve filter is obstructed. • It does not drain, water remains inside. This could be because: - The drainage is obstructed or badly installed. - The drain pipe is obstructed or folded- The filters are blocked- The selected program has not finished, wait for it to finish. • There are detergent remains in the dispenser or on the doorThis could be because: - A dish is preventing the dispenser from opening- The detergent is past its expiry date or is not appropriate- The water spray arms are hitting a dish- The water spray arm holes are covered. - The detergent compartment was damp when the detergent was put it. The compartmentmust be dry. • Unusual foam is formed: - You have put in washing up liquid instead of dishwasher detergent. • The dishwasher makes strange noisesThis could be because: - You have not positioned the dishes correctly. - The water spray arms are hitting a dish• Why does the dishwasher not start? This could be because: - There is no electricity supply. - It is not plugged in properly- The fuses have tripped- The dishwasher is not connected to the electricity supply- You have not pressed the On/Off button (the indicator light for this button must becontinuously lit) - The dishwasher door is not closed properly. - The start button has not been pressed. • The dishwasher starts but no water entersThis could be because: - There is no water in the network. - The stopcock is not open- The water inlet solenoid valve filter is obstructed. • It does not drain, water remains inside. This could be because: - The drainage is obstructed or badly installed. - The drain pipe is obstructed or folded- The filters are blocked- The selected program has not finished, wait for it to finish. • There are detergent remains in the dispenser or on the doorThis could be because: - A dish is preventing the dispenser from opening- The detergent is past its expiry date or is not appropriate- The water spray arms are hitting a dish- The water spray arm holes are covered. - The detergent compartment was damp when the detergent was put it. The compartmentmust be dry. • Unusual foam is formed: - You have put in washing up liquid instead of dishwasher detergent. • The dishwasher makes strange noisesThis could be because: - You have not positioned the dishes correctly. - The water spray arms are hitting a dish 2 PROBLEMS WITH WASH EFFICIENCY 2 PROBLEMS WITH WASH EFFICIENCY DISHWASHERWARNINGS DISHWASHERWARNINGS ECOLOGICAL WASHING MESURES DE SECURITE IMPORTANTES AVERTISSEMENT.- Avant toute utilisation du lave-vaisselle,...

Эта инструкция также подходит к моделям:
Посудомоечные машины - IX LFA-013 SS (1.1 mb)
Посудомоечные машины - IX LFA-013 SS (1.1 mb)
Посудомоечные машины - LFA-019 IX (1.1 mb)
Посудомоечные машины - LFA-019 SS (1.1 mb)

Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории