Оценок - 2, средний балл: 3.5
(
)
)
|
Фрагмент инструкции
Manual setting: 1. Open the dishwasher door. 2. Remove the lower basket from the dishwasher. 3. Turn the hardness range switch to or 1 (see table). 4. Replace the lower basket. Electronic setting: 1. Press the ON/OFF button. The LED in the ON/OFF button will 3 If other indicators are also illuminated, this means that a programme has started. The programme must be cancelled (RESET): Press function buttons 1 and 2 simultaneously for approx. 2 seconds. All other indicators will go out. 2. Press the function buttons 1 and 2 simultaneously and keep them pressed until the LED indicators for function buttons 1 and 3 flash. 3. Press function button 1again. The LED indicator for function button 1 will flash. The multi-display will indicate the hardness setting. 4. Pressing function button 1 increases the hardness setting by 1 degree. (Exception: hardness setting 1 follows hardness setting 10). 5. When the hardness setting is correct, press the ON/OFF button. The hardness setting is now saved. 1) (°d) German degree, measure of the hardness of water 2) [mmol/l] millimol per litre, international unit for the hardness of water 3) On this setting the length of the programme may be slightly longer. *) Factory setting 11 Operating Instructions Special salt for the water softener 3 If the water hardness in your area is less than 4 °d, then the water in your dishwasher does not need to be softened and you do not need to use special salt or salt substitute. Water can be softened in one of two ways: • If you are using dishwasher detergent that already contains salt substitute, the detergent only is put into the detergent compartment. – In this case the water softener must manually be set to 0 and electronically to 1 to ensure that no special salt is added. • If you are using dishwasher detergent and special salt separately, the special salt is to be put into the salt container. – In this case the water softener must manually be set to 0 and electronically to between 2 and 10 (depending on the water hardness in your area) to ensure that the special salt is dispensed from the salt container. 1 Only use special salt intended for dishwashers. Never fill the salt supply container with different types of salt (e.g. cooking or table salt) or detergent. This would destroy the water softener. Prior to filling with salt, please check each time that you really do have a packet of special salt in your hand. Setting the amount of special salt to be added 3 Some appliances are equipped with an additional 3in 1 function. If you use 3-in-1 dishwashing tablets and select the 3in1 function together with the programme, the inflow of special salt does not have to be deactivated (see ”3in1 function”). 0 1. Set the water softener manually and electronically to the desired water hardness: Manual setting Electronic setting Multi-display indicator Addition of special salt 0 1 IL Do not add special salt. Addition of special salt 0 - 1 2-10 2l to 10l via salt container (factory setting) Operating Instructions vated. Adding special salt the special salt: panel. 0 1. Open the door, remove the lower basket. 2. Undo the lid on the salt container by turning it anticlockwise. 3. When using for the first time: fill the salt container with water. 4. Place the funnel supplied on the container opening. Fill the container with salt through the funnel; the capacity of the co tainer is approx. 1.0-1.5 kg depending on the grain size. Do not overfill the salt container with salt. next wash programme. 13 3 If the water softener is electronically set at “1” for the purpose of using detergent that includes special salt, the special salt indicator is deactiIf you are using dishwasher detergent and special salt separately, add – Before using the dishwasher for the first time. – When the indicator for special salt J3 The water expelled by filling the salt container with salt runs o salt container onto the base of the washing compartment. This is cause for concern, the water will be pumped out at the start of the 5. Clean any salt remnants on the container opening. 6. Turn the lid clockwise to the stop, otherwise dishwasher salt will leak into the wash water, this could lead to poor wash results. To avoid this run a rinse programme after filling the salt container with special salt. This will wash away salt water and any salt crystals that have been spilt. 3 Depending on the size of the salt grains, it can take several hours for the salt to dissolve in the water and the special salt indicator J to extinguish. The setting of the water softener and the consumption of salt are dependent on the hardness of the local water. SALESALTSALZSEL Operating Instructions Filling with Rinse Aid Rinse aid is automatically added during the last rinse, ensuring thor ough rinsing, spot and streak free drying. 1 Only use rinse aid specifically designed for domestic dishwashers. Never fill the rinse aid container with any other substance as this would damage the appliance. Fill with rinse aid: –...