Оценок - 5, средний балл: 3.8
(
)
)
|
Фрагмент инструкции
9 Clock ...................................................................... 10 Alarm ...................................................................... 11 Calendar ................................................................. 12 Moon phase ............................................................ 12 Barometer ............................................................... 13 Weather forecast ..................................................... 14 Temperature & humidity ........................................... 14 Backlight ................................................................. 17 1 Reset system ........................................................... 18 Safety and care ....................................................... 18 Warnings ................................................................. 19 Troubleshooting ....................................................... 20 Specifications .......................................................... 21 Additional resources ................................................ 23 PS M01 English R17 op 1 7/24/03, 10:57 AM Black EN ABOUT THIS GUIDE Congratulations on your selection of the Philippe Starck with Oregon Scientific Full Weather Station with Radio- Controlled Clock (PS-M01 / PS-M01U). This powerful device bundles time keeping, alarm, indoor and wireless outdoor temperature and humidity monitoring, and weather forecasting into a single tool you can use from the convenience of your home. Keep this manual handy as you use your new product. It contains practical step-by-step instructions, as well as technical specifications and warnings you should know. In this box, you will find: • Main unit • Remote sensor • Batteries • AC/DC power adapter 2 PS M01 English R17 op 2 7/24/03, 10:57 AM Black PRODUCT OVERVIEW DESCRIPTIONS TOP VIEW 1. Snooze / Light button 2. Light sensor 1 2 EN 3 PS M01 English R17 op 3 7/24/03, 10:57 AM Black EN LCD DISPLAY 1 2 3 4 5 6 DESCRIPTIONS 7 1. 2. 3. 4. 5. 6. 7. 8. Low battery icon Clock Barometer Weather forecast Moon phase Calendar Temperature and humidity Alarm 8 4 PS M01 English R17 op 4 7/24/03, 10:57 AM Black BACK VIEW BUTTON DESCRIPTIONS EN 1. Select - switch modes / change settings 2. Up - increase setting / activate auto-synch 3. Down - decrease setting / deactivate auto-synch 1 4. Channel - switch remote unit 4 5. Alarm - activate / deactivate alarm 5 2 3 5 PS M01 English R17 op 5 7/24/03, 10:57 AM Black EN BOTTOM AND SIDE VIEW DESCRIPTIONS 2 31 5 4 1. Battery compartment 2. Backlight switch 3. Reset button 4. Light sensitvity knob 5. DC Power input jack NOTE AC power adapter not shown. 6 PS M01 English R17 op 6 7/24/03, 10:57 AM Black EN REMOTE UNIT 1 2 3 DESCRIPTIONS 4 1. Temperature / Trend display 5 2. Low battery icon 6 3. Humidity / Trend / Comfort Level display 4. °C/°F switch 7 5. Channel switch 6. Reset button 7. Battery compartment 8. Wall-Mount hole 8 9. Battery compartment lid 9 7 PS M01 English R17 op 7 7/24/03, 10:57 AM Black EN GETTING STARTED BATTERIES Batteries for the remote and main units are supplied with this product. Replace them whenever the low battery signal ( ) displays. Remove the battery compartment lid on the bottom of the main unit, and insert the batteries. You will need a small Phillips screwdriver to remove the remote unit compartment lid. Be sure to match the correct polarity, as shown in the battery compartment. Before you close the lid, press the RESET button with the point of a blunt object (such as a ball point pen). NOTE Insert the batteries in the remote unit before you set up the main unit. Do not use rechargeable batteries. AC POWER ADAPTER An AC power adapter is supplied for use with the main unit. You must connect the power adapter if you wish to use the continuous backlight feature. The jack is located on the side of the unit. NOTE If the AC power becomes unavailable, the unit will automatically switch to battery power. SWITCH BETWEEN MODES Press SELECT. The selected mode will flash. The display will stop flashing if no key is pressed within 5 seconds. 8 PS M01 English R17 op 8 7/24/03, 10:57 AM Black EN CHANGE SETTINGS Press and hold SELECT for 2 seconds. Then, press UP or DOWN to change each setting. Press SELECT to switch options. REMOTE UNIT SET UP Up to 3 remote units can be used with this product to monitor outdoor temperature and humidity. The measurement unit (°C or °F) and channel number (1, 2, or 3) switches are located in the battery compartment, and should be set prior to installation. NOTE Additional remote units sold separately. If you are using more than one remote unit, be sure to select a different channel number for each unit. INSTALLATION Mount the remote unit on a flat surface using the recess holes on the back of the unit. For best results: • Before you insert the batteries, select the measurement unit and channel number first. • Place the unit out of direct sunlight and moisture. • Do not place the remote unit more than 20 - 30...
Эта инструкция также подходит к моделям:Погодные станции - STARCK PS-M01U (203.81 kb)