Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
: Risk of electric shock! Do not use any high-pressure cleaners or steam cleaners, which can result in an electric shock. : Risk of burns! The appliance becomes very hot. Never touch the interior surfaces of the cooking compartment or the heating elements. Always allow the appliance to cool down. Keep children at a safe distance. Cleaning agents To ensure that the different surfaces are not damaged by using the wrong cleaning agent, pay attention to the information in the table. Do not use ¦ sharp or abrasive cleaning agents, ¦ cleaning agents with a high alcohol content, ¦ hard scouring pads or cleaning sponges, ¦ high-pressure cleaners or steam cleaners. Wash new sponge cloths thoroughly before use. Area Cleaning agents Oven front Hot soapy water: Clean with a dish cloth and dry with a soft cloth. Do not use glass cleaners or glass scrapers. Stainless steel Hot soapy water: Clean with a dish cloth and dry with a soft cloth. Remove flecks of limescale, grease, starch and albumin (e.g. egg white) immediately. Corrosion can form under such residues. Special stainless steel cleaning products suitable for hot surfaces are available from our after-sales service or from specialist retailers. Apply a very thin layer of the cleaning product with a soft cloth. Aluminium Clean with a mild window cleaning agent. Using a window cloth or a non-fluffing microfibre cloth, wipe over the surfaces lightly in a horizontal direction. Enamel surfaces Apply commercially available washing-up (smooth surfaces) liquid or a vinegar solution with a soft, damp cloth or chamois; dry with a soft cloth. Soak baked-on food residues with a damp cloth and detergent. If the cooking compartment is heavily soiled, use a gel oven cleaner. This can be applied to the affected area. Leave the cooking compartment open after cleaning to allow it to dry. Area Cleaning agents Self-cleaning sur-Note the instructions in the section: faces (rough sur-Catalytic cooking compartment panel faces) Gas burner Never clean the gas burners in the cooking compartment yourself. Door panels Glass cleaner: Clean with a soft cloth. Do not use a glass scraper. Glass cover for the Hot soapy water: oven light Clean with a dish cloth. Seal Hot soapy water: Do not remove. Clean with a dish cloth. Do not scour. Rails Hot soapy water: Soak and clean with a dish cloth or brush. Accessories Hot soapy water: Soak and clean with a dish cloth or brush. Catalytic cooking compartment panels The catalytic cooking compartment panels are coated with self- cleaning enamel. The surfaces clean themselves while the oven is in operation. Larger splashes will only be removed after the oven has been used several times. Self-cleaning surfaces The side walls are covered with catalytic panelling. Never clean these surfaces with oven cleaner. Slight discolouration of the enamel does not affect automatic self-cleaning. Removing and fitting the appliance door You can remove the appliance door to clean it more thoroughly. Removing the appliance door : Risk of injury! Whenever the hinges are not locked, they snap shut with great force. When removing the oven door, ensure that the locking pins are fully inserted into the holes in the hinges. 1. Open the oven door fully. 2. Lock both hinges on the left and right using a locking pin (a). Note: The locking pins must be fully inserted into the holes in the hinges. 3. Grip the oven door on either side with both hands and close the oven door by approx. 30° (b). .... 4. Raise the oven door slightly and pull it out. Note: Do not fully close the oven door. The hinges may become bent and the enamel may be damaged. Fitting the appliance door 1. Grip the oven door on either side with both hands. 2. Slide the hinges into the slots in the oven (a). Note: The notch below the hinges must engage into the frame of the oven (b). D E 3. Lower the door downwards. 4. Remove the locking pins. : Risk of injury! If the oven door falls out accidentally or a hinge snaps shut, do not reach into the hinge. Call after-sales service. Removing and inserting the hook-in racks You can remove the hook-in racks for easier cleaning. Removing the hook-in racks The hook-in racks in each case are fixed to the side walls of the cooking compartment at three points. 1. Grip the hook-in rack on the front and pull it to the middle of the cooking compartment. The front hook of the rack will release from the hole. 2. Fold out the hook-in rack further and pull it from the rear holes of the side panel. 3. Hold the catalytic cooking compartment panel in place. 4. Pull the hook-in rack out of the holes. D E Inserting the hook-in rack 1. Hold the catalytic cooking compartment panel in place. 2. Insert the hooks of the hook-in rack into the rear holes in the side panel. 3. Press the front hook of the hook-in rack into the hole. Troubleshooting Malfunctions often have simple explanations. Refer to the table before calling the after-sales service, as you may be able to remedy the fault yourself. : Risk ...
Эта инструкция также подходит к моделям:Плиты - HGL10E150/02 (1.77 mb)