Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
Wash new sponges thoroughly before first use. If the cover hinges become loose, note the letters marked on them. The hinge with the letter R must be fitted on the right, and the hinge with the letter L must be fitted on the left. Stainless steel fronts Wipe with some washing- up liquid and a damp cloth. Always wipe parallel to the natural grain. Otherwise, you may scratch the surface. Dry with a soft cloth. Remove flecks of limescale, grease, starch and albumin ( e.g. egg white) immediately. Do not use any abrasive materials, scouring sponges or rough cleaning cloths. The stainless steel fronts can be polished using a special care product. Follow the manufacturer's instructions. You can purchase special stainless steel cleaner from our after-sales service or from specialist retailers. Enamel surfaces and lacquered surfaces Burners and steel grid of the gas burners Clean with some washing- up liquid and a damp cloth. Dry with a soft cloth. Do not clean in the dishwasher. Remove the wire rack and clean with a sponge, washing- up liquid and some hot water. Remove the burner cup and cap. Clean with a sponge and some hot water and washing- up liquid. Ensure that the gas outlets on the burner cups are clean and unobstructed. Brush the igniters with a small, soft brush. The gas burners only work properly when the igniters are clean. Remove food residue from the burner shells with some washing-up liquid and a damp cloth. Only use a little water. Water must not be allowed to enter the appliance. Ensure that the nozzle opening does not become blocked or damaged during cleaning. Dry all parts after cleaning and place the burner cover accurately on the burner cup. If the parts are not positioned accurately, it will be harder to ignite the burner. The burner covers are coated with black enamel. Due to the high temperatures, discolouration may occur. This will not impair the function of the burner. Replace the wire rack in the oven. Electric hob ( option) Clean with the hard side of a scouring sponge and some liquid scouring agent. After cleaning, switch the hob on briefly to dry it. Wet hobs rust over time. Then apply a care product. Always remove spilt liquids and food residue immediately. Metal ring of the The metal ring may discolour with time. However, it is possible restore the original colour. Clean the ring electric hob ( option) with the hard side of a scouring sponge and some liquid scouring agent. When doing so, make sure that you do not scour the adjacent surfaces, as this could damage them. Knobs Clean with some washing- up liquid and a damp cloth. Dry with a soft cloth. Door glass Can be cleaned with glass cleaner. Do not use any abrasive cleaning agents or sharp metal objects. These could scratch and damage the surface of the glass panel. Seal Wipe with a damp cloth. Dry with a soft cloth. Oven interior Clean with hot water or vinegar solution. For heavy soiling: Only use oven cleaner on cold surfaces. Glass cover on the Clean with some washing- up liquid and a damp cloth. Dry with a soft cloth. oven light Accessories Soak in hot soapy water. Clean with a brush or a sponge. Aluminium baking Do not clean in the dishwasher. Never use oven cleaner. To avoid scratches, never touch the metal sur tray ( option) faces with a knife or similar sharp object. Wipe the surfaces horizontally and without applying pressure with soapy water and a soft window cloth or a lint-free microfibre cloth. Dry with a soft cloth. Do not use any abrasive materials, scouring sponges or rough cleaning cloths. They could scratch the baking tray Childproof lock If a childproof lock has been fitted on the oven door, it must be removed before cleaning. Soak all plastic ( option) parts in hot soapy water and wash with a sponge. Dry with a soft cloth. If very dirty, the childproof lock will not work properly. Plinth drawer Clean with some washing- up liquid and a damp cloth. Dry with a soft cloth. ( option) Accessories Soak in hot soapy water. Clean with a brush or sponge. Detaching and refitting the rails The rails can be removed for cleaning. The oven must have cooled down. Detaching the rails 1. Lift up the front of the rail 2. and unhook it ( figure A) . 3. Then pull the whole rail forward 4. and remove it ( Fig. B) . ! " # , Refitting the rails 1. First insert the rail into the rear socket, press it to the back slightly ( figure A) , 2. and then hook it into the front socket (figure B) . The rails fit both the left and right sides. Ensure that, as shown in figure B, levels 1 and 2 are below and levels 3, 4 and 5 are above. Clean the rails with cleaning agent and a sponge. For stubborn deposits of dirt, use a brush. 15 Detaching and attaching the oven door For cleaning purposes and to remove the door panels, you can detach the oven door. The oven door hinges each have a locking lever. When the locking levers are closed (figure A), the oven door is secured in place. It cannot be detached. When the locking levers are open in order to det...
Эта инструкция также подходит к моделям:Плиты - HGG24W256R/01 (2.31 mb)
Плиты - HGG24W256R/35 (2.31 mb)