Оценок - 4, средний балл: 4.5
(
)
)
|
Фрагмент инструкции
Do not allow a heavy build-up of soil to accumulate in the oven. During the cleaning process, the kitchen should be well ventilated to get rid of normal odors associated with cleaning. Before Self-Cleaning 1. Turn off the oven light before cleaning. The light may burn out during the clean cycle. 2. Remove all pans and oven racks from the oven. The oven racks will discolor and may not slide easily after a self- clean cycle if they are not removed. 3. Clean oven frame, door frame, area outside of gasket, and around the opening in the door gasket with a nonabrasive cleaner such as Bon Ami* or detergent and water. The self-cleaning process does not clean these areas. They should be cleaned to prevent soil from baking on during the clean cycle. (The gasket is the seal around the oven door and window.) 4. To prevent damage, do not clean or rub the gasket around the oven door. The gasket is designed to seal in heat during the clean cycle. 5. Wipe up excess grease or spillovers from the oven bottom. This prevents excessive smoking, flare-ups or flaming during the clean cycle. 6. Wipe up sugary and acidic spillovers such as sweet potatoes, tomato, or milk-based sauces. Porcelain enamel is acid-resistant, not acid-proof. The porcelain finish may discolor if acidic spills are not wiped up before a self-clean cycle. Note: Oven temperature must be below 400° F to program a clean cycle. 1. Close the oven door. 2. Press the Clean pad. • CLEAN flashes. • SET flashes in the display. 3. Press the Autoset 0 pad. • MEd (Medium Soil, 3 hours) is displayed. 4. Press the Autoset 0 pad to scroll through the self-cleaning settings. HVy (Heavy Soil, 4 hours) MEd (Medium soil, 3 hours) LITE (Light Soil, 2 hours) Choosing the soil level of the oven automatically programs the self-cleaning time. 5. After four seconds, the oven will start cleaning. • If the door is not closed, beeps will sound and “door” will display. If the door is not closed within 30 seconds, the self-cleaning operation will be canceled and the display will return to the time of day. • CLEAN will appear in the display. • LOCK will flash in the display. Once the door locks, the word will remain steady. • The cleaning time will start counting down in the display. To Delay a Self-Clean Cycle: 1. Press the Delay 1 pad. • DELAY flashes. • 00:00 will flash in the display. 2. Enter the amount of time you want to delay the cycle using the appropriate number pads. 3. Press the Clean pad. • SET flashes in the display. 4. Press the Autoset 0 pad. • LITE (Light soil level) is displayed. cont. * Brand names for cleaning products are registered trademarks of the respective manufacturers. 18 Care & Cleaning 5. Press the Autoset 0 pad to scroll through the self-cleaning settings. HVy (Heavy Soil, 4 hours) MEd (Medium Soil, 3 hours) LITE (Light Soil, 2 hours) Choosing the soil level of the oven automatically programs the self-cleaning time. 6. After four seconds, CLEAN and DELAY will light and LOCK will flash in the display. When the oven door latches, LOCK will stop flashing and light continuously to show that the oven is set for a delayed clean operation. The delay time will display. During the Self-Clean Cycle When LOCK shows in the display, the door cannot be opened. To prevent damage to the door, do not force the door open when LOCK is displayed. Smoke and Smells You may see some smoke and smell an odor the first few times the oven is cleaned. This is normal and will lessen in time. Smoke may also occur if the oven is heavily soiled or if a broiler pan was left in the oven. Sounds As the oven heats, you may hear sounds of metal parts expanding and contracting. This is normal and will not damage the oven. After Self-Cleaning About one hour after the end of the self-clean cycle, LOCK will turn off. The door can then be opened. Some soil may leave a light gray, powdery ash. Remove it with a damp cloth. If soil remains after wiping, that means the clean cycle was not long enough. The soil will be removed during the next clean cycle. If oven racks were left in the oven and do not slide smoothly after a clean cycle, wipe racks and rack supports with a small amount of vegetable oil to make them easier to move. Fine lines may appear in the porcelain because it went through heating and cooling. This is normal and will not affect performance. A white discoloration may appear after cleaning if acidic or sugary foods were not wiped up before the self-clean cycle. This discoloration is normal and will not affect performance. Notes: • If the oven door is left open, “door” will flash in the display and a signal will beep until the door is closed and the Clean pad is pressed again. • If more than five seconds elapse between pressing the Clean pad and the Autoset 0 pad, the program will automatically return to the previous display. • The oven door will be damaged if the oven door is forced to open when LOCK is still displayed. 19 Care & Cleaning Cleaning Procedures CAUTION • Be sure appliance is...