Оценок - 4, средний балл: 4.5
(
)
)
|
Фрагмент инструкции
Each press will open or close the disc holder w. r Remote control sensor (REMOTE SENSOR) • About the wireless remote control unit : Please contact local dealer or distributor. t Display • Refer to page 8 for details. y PLAY button ( 1) • Use this to start playback. u STOP button ( 2) • Press this button to stop playback. i PAUSE button ( 3) • Use this pause playback. o CUE button • When pressed during playback, the pickup returns to the position at which playback last started and the pause mode is set. • When pressed during manual search, the pause mode is set at that position. • When pressed while the disc holder is open, the disc holder closes and the pause mode is set. ! 0 Select knob ( 8, 9) • Turn the knob clockwise by one click to move one track forward, counterclockwise by one click to move one track backward. • When the knob turned while pressing it in, one click corresponds to 10 tracks. • In the preset mode, use this knob to set and enter preset settings. ! 1 ! 2 Search button ( 6, 7) • These buttons are used to accurately change the positions where playback will start. ! 3 PLAY MODE button • Press this button to switch the play mode. ! 4 END MON button • Press this button in the standby mode to monitor the end of the track. (End Monitor) . In the MP3 play mode, the time of monitor may not be correctly. ! 5 PITCH button • Press this button to switch to the play speed set with the Pitch Slider. The PITCH LED flashes. • When the button is pressed again, the fixed pitch mode is set and the PITCH LED lights. • Press the button again to cancel the pitch play mode and return to normal speed. ! 6 Pitch Slider • Use this slider to adjust up to decrease the play speed, down increase the play speed. ! 7 PROG. PLAY ON/OFF button • When this button is pressed while indicator is lit, the program play mode • The button will not function during the A-mode. • The PROG. PLAY ON/OFF LED lights during the program play standby and play modes. • When the button is pressed during the program play standby or play mode, the program play mode is cleared. ! 8 PROGRAM IN button • Press this button to set the program input mode. • The button will not function during the play mode. • The PROG indicator flashes when in the program input mode. • The PROG indicator lights when a program is set. ! 9 REPEAT button • Press this to perform repeat playback. @ 0 TIME button • The time display switches each time this button is pressed. (“REMAIN”, “ELAPSED”) @ 1 TITLE button • When the button is pressed, the text information (Disc title, track title, disc artist or track artits) is displayed. • When the button is pressed while in the stop mode with a disc containing an MP3 ID3-Tag loaded, the file name is displayed. When pressed during playback, the display switches as shown below. Elapsed time of currently playing track File name of currently playing track Title name Artist name Album name @ 2 FOLDER button • When disc containing files is loaded, in the stop mode the folder select mode is @ 3 A-B (A-B repeat) button • Use this to play a set section repeatedly. • When the button is pressed once during playback, that position is set as the A point the “A-B” indicator flashes on the display. • When the button is pressed again, that position is set as the B point, the “A-B” indicator stops flashing (remaining lit), and the A-B section begins playing repeatedly. • When the button is pressed again, A-B repeat is canceled and the mode returns to the normal play mode. @ 4 Headphones jack • For private listening, you can connect your headphones to this jack. @ 5 PHONES LEVEL control • Use this adjust the output level of the headphones. ENGLISH (2) Rear panel q BALANCED OUT • These are active balanced type connections. The CD’s playback signals are output from these connectors. • Pin layout : 1. Common / 2. Hot / 3. Cold • Applicable connector : Cannon XLR-3-31 or equivalent. NOTE : • Do not short-circuit the hot or cold pin with the common pin. w LEVEL L/R controls • Use these controls to adjust the level of the audio signals from the BALANCED OUT connectors. e UNBALANCED OUT jacks • These are unbalanced outputs using RCA type jacks. r DIGITAL OUT jack • This is a coaxial output using an RCA type jack. • Signal format : SPDIF or IEC-958 Type II t Serial control port • This is serial remote connector. • Applicable connector : 9-pin D-sub (male) • Baud rate : 9600 bps • Pin layout RS-232C Pin No. Signal Name I / O 1 GND _ 6 NC _ 2 TxD O 7 NC _ 3 RxD I 8 NC _ 4 NC _ 9 NC _ 5 S. GROUND _ RS-422A Pin No. Signal Name I / O 1 GND _ 6 NC _ 2 TxD (RETURN) O 7 TxD O 3 RxD I 8 RxD (RETURN) I 4 NC _ 9 NC _ 5 S. GROUND _ y Parallel remote control port • This is a parallel remote connector. • Applicable connector : 25-pin D-sub (male) • Connecting signal layout Pin No. Signal Name I / O 1 FG _ 14 PLAY tally O TTL (Iol = 20mA) 2 PLAY command I HCMOS (Ii = 3mA) 15 PAUSE tally O TTL (Iol = 20mA) 3 PAUSE command I HCMOS (Ii = 3mA) 16 CUE tally O TTL (Iol = 20mA)...