Оценок - 1, средний балл: 3
(
)
)
|
Фрагмент инструкции
Для этого в режиме остановки или воспроизведения нажмите кнопку MODE (4) четыре раза, при этом на дисплее появится индикатор “SHUFF”, а затем кнопку "PLAY/PAUSE" (6). SHUFF CD 00 2 01:10 PLAY АНТИ-ШОК Функция “АНТИ-ШОК” необходима для предотвращения порчи или остановки звука, когда прибор находится под влиянием тряски или вибрации во время проигрывания. • Когда плеер подвержен вибрации во время воспроизведения мелодий, данные, хранимые в памяти, продолжают расшифровываться. Это дает время для стабилизации и продолжения считывания новых данных. • Если прибор подвергается продолжительным вибрациям и вся информация, хранимая в памяти, использована, то на дисплее высветится знак, напоминающий об этом. В этом случае звук может остановиться на мгновение. Примечание: Анти-шок для компакт-диска - 40 с., для MP3 - 120 с. БЛОКИРОВКА КНОПОК Вы можете заблокировать все кнопки от случайного нажатия. Для этого установите переключатель блокировки (17) в положение 01М. Для разблокировки - в положение ОЕЕ CD HOLD 00 1 01:58 i 20 ENGLISH • The first 10 seconds of each track from track 1 will be played in order. RANDOM PLAY 1. Press the MODE button (4) fourth in stop mode or during playing.. 2. “SHUFF” appears in the display, then press PLAY/PAUSE button (6). • All tracks on the disc will be played in random order selected by CD player, then it will shut off automatically. SHUFF CD 00 2 01:10 PLAY MP3 DISC SECTION NOTE: Because MP3 disc has large capacity, the disc-reading time will be a little longer. Open the CD door, put the disc inside the unit correctly, then close the door and press PLAY/PAUSE button (6), meanwhile "READING" appear on the screen. The disc-reading orders are as following: The upper designs explain: the MP3 has 11 Catalogs and 172 tracks altogether, but the tracks' number in each Catalog is different. For example: Catalog 1 has 16 tracks, Catalog 2 has 14 tracks......After the whole Catalogs and tracks shown, the unit will enter playback from the first track. While playing MP3 the functions of the buttons of PLAY/PAUSE, STOP/OFF, FORWARD/BACKWARD are the same as CD disc. MP3 01 00 16 —► READING MP3 MP3 MP3 02 00 30 t t 11 01 72 01 00 1 01:02 lnl TRACK 01 Track numbers {including the tracks of the previous catalog) SINGLE TRACK REPEAT In playing mode, press the MODE button (4) once to repeat current playing track, display appears "REPT 1 SINGLE CATALOG'S TRACKS REPEAT In playing mode, press the MODE button (4) twice, the whole tracks in the current playing track's Catalog will be repeated, display appears "REPT DIR". WHOLE DISC REPEAT In playing mode, press the MODE button (4) thrice, the whole disc's tracks would be repeatedly playing, display shows "REPT ALL". TRACK-SELECTING PLAYBACK • You may press SKIP/ SEARCFI button ( 5 or 2) to select the tracks you require in the same content, the concrete operations are as same as the operations on CD section. MP3 REPT ALL 01 002 03:081 TRACK 02 MP3 REPT DIR 01 002 03:081 TRACK02 MP3 REPT1 _ 01 002 03:08 111 TRACK02 9 3773.qxd 10.06.03 17:33 Page 20 ENGLISH • During Mp3 disc playing, press ALBUM/10+ (3) button once to select the track over +10 in the current catalog, adding ten after pressing each time. • In playing mode, if you are going to select the different tracks in different catalog, you select catalog first, then choose the tracks you need in the catalog, operations as follows: • Press and hold ALBUM button (3), catalog appears in the display. • Press the SKIP/SEARCH button (5 or 2) to select catalog. • Press the PLAY/PAUSE button (6), the first track of the selec ted catalog appears. • Press the SKIP/SEARCH button (5 or 2) to select the concrete track you are going to listen to. NOTE: Take track 5 of catalog 9 as an example: • Presume the first playing track is in catalog 1 after reading CD, the display showing as follows: • Press and hold ALBUM button (3), the display will show catalog "01". • Press the SKIP/SEARCH button («or ►►) to select the cata log, showing as follows: • Press the PLAY/PAUSE button (6), the 1st track in catalog 9 appears, starting to play. • Press the SKIP/SEARCH button (5 or 2) to select track 2, the play may begin. PROGRAM PLAY (up to 60 tracks can be edited) NOTE: This can only be done during stopping state. • While the unit is in stop mode, press PROG/EQ button. • Press the SKIP/SEARCH button (5 or 2 )to select catalog. • Press PROG/EQ button (8) again. • Press the SKIP/SEARCH button (5 or 2) to select your required tracks, and then press PROG/EQ button (8) to confirm. • Repeat the above steps to program the other tracks. • Press PLAY/PAUSE button (6) to enter program play. Take the track 3 in catalog 5 as an example. • In stopping mode, display shows "11 “ “0172". • Press the PROG/EQ button (8), display shows "01" and "P-01". • Press the SKIP/SEARCH button (5 or 5) to select catalog 5, the display shows "05". • Press the PROG/EQ ...