Оценок - 3, средний балл: 4.3
(
)
)
|
Фрагмент инструкции
Floppy disk drive connector (34-1 pin FLOPPY1) Page PagePagePagePagePage 2-22 2. Primary IDE connectors (40-1 pin PRI_IDE, SEC_IDE) 2-22 3. Serial ATA connectors (7-pin SATA1, SATA2, SATA3, SATA4) 2-23 4. Serial ATA RAID connectors (7-pin SATA_RAID1, SATA_RAID2, SATA_RAID3, SATA_RAID4) 2-24 5. CPU, front, and rear fan connectors (3-pin CPU_FAN1, CPU_FAN2, FRNT_FAN1, FRNT_FAN2, REAR-FAN1, REAR_FAN2) 2-25 6. Backplane SMBus connector (6-1 pin BPSMB1) 2-25 7. USB connectors (10-1 pin USB56, USB78, USB910) 2-26 8. IEEE 1394 connector (10-1 pin IE1394_1) 2-26 9. ATX power connectors (24-pin EATXPWR1, 8-pin ATX12V1) 2-27 10. GAME/MIDI port connector (16-1 pin GAME1) 2-28 11. Internal audio connectors (4-pin CD1) 2-28 12. Chassis intrusion connector (4-1 pin CHASSIS1) 2-29 13. Front panel audio connector (10-1 pin FP_AUDIO1) 2-29 14. System panel connector (20-pin PANEL1) 2-30 Chapter 2: Hardware information Chapter 2: Hardware informationChapter 2: Hardware informationChapter 2: Hardware informationChapter 2: Hardware informationChapter 2: Hardware information 2.3 Central Processing Unit (CPU) 2.3.1 2.3.12.3.12.3.12.3.12.3.1 Overview OverviewOverviewOverviewOverviewOverview The motherboard comes with dual surface mount 940-pin Zero Insertion Force (ZIF) sockets designed for AMD Opteron™ 64 processors. The 128-bit-wide data paths of these processors can run applications faster than processors with only 32-bit or 64-bit wide data paths. Take note of the notched corner on the CPU. This corner should match a specific corner on the socket to ensure correct installation. Notched corner 2.3.2 2.3.22.3.22.3.22.3.22.3.2 Installing the CPU Installing the CPUInstalling the CPUInstalling the CPUInstalling the CPUInstalling the CPU To install a CPU: 1. Locate the CPU socket on the motherboard. K8N-DL® K8N-DL CPU Socket 940 CPU1 CPU2 • Before installing the CPU, make sure that the socket box is facing towards you and the load lever is on your left. • If installing only one CPU, use the CPU socket marked CPU1. ASUS K8N-DL ASUS K8N-DLASUS K8N-DLASUS K8N-DLASUS K8N-DLASUS K8N-DL2-7 2-72-72-72-72-7 2. Unlock the socket by pressing the lever sideways, then lift it up to a 90°-100° angle. Socket Lever Socket LeverSocket LeverSocket LeverSocket LeverSocket Lever Make sure that the socket lever is lifted up to 90°-100° angle, otherwise the CPU does not fit in completely. 3. Position the CPU above the socket such that the notched corner matches the socket corner with a triangle mark. 4. Carefully insert the CPU into the socket until it fits in place. Notched NotchedNotchedNotchedNotchedNotched corner cornercornercornercornercorner Triangle mark Triangle markTriangle markTriangle markTriangle markTriangle mark The CPU fits only in one correct orientation. DO NOT force the CPU into the socket to prevent bending the pins and damaging the CPU! 5. When the CPU is in place, push down the socket lever to secure the CPU. The lever clicks on the side tab to indicate that it is locked. Chapter 2: Hardware information Chapter 2: Hardware informationChapter 2: Hardware informationChapter 2: Hardware informationChapter 2: Hardware informationChapter 2: Hardware information 2.3.3 2.3.32.3.32.3.32.3.32.3.3 Installing the heatsink and fan Installing the heatsink and fanInstalling the heatsink and fanInstalling the heatsink and fanInstalling the heatsink and fanInstalling the heatsink and fan The AMD Opteron™ 64 processors require a specially designed heatsink and fan assembly to ensure optimum thermal condition and performance. Make sure that you use only qualified heatsink and fan assembly. Follow these steps to install the CPU heatsink and fan. 1. Place the heatsink on top of the installed CPU, making sure that the heatsink fits properly on the retention module base. • The retention module base is already installed on the motherboard upon purchase. • You do not have to remove the retention module base when installing the CPU or installing other motherboard components. • If you purchased a separate CPU heatsink and fan assembly, make sure that a Thermal Interface Material is properly applied to the CPU heatsink or CPU before you install the heatsink and fan assembly. CPU Fan CPU FanCPU FanCPU FanCPU FanCPU Fan CPU Heatsink CPU HeatsinkCPU HeatsinkCPU HeatsinkCPU HeatsinkCPU Heatsink Retention Module Base Retention Module BaseRetention Module BaseRetention Module BaseRetention Module BaseRetention Module Base Retention bracket Retention bracket lock Retention bracket lockRetention bracket lockRetention bracket lockRetention bracket lockRetention bracket lockRetention bracketRetention bracketRetention bracketRetention bracketRetention bracket Your boxed CPU heatsink and fan assembly should come with installation instructions for the CPU, heatsink, and the retention mechanism. If the instructions in this section do not match the CPU documentation, follow the latter. ASUS K8N-DL ASUS K8N-DLASUS K8N-DLASUS K8N-DLASUS K8N-DLASUS K8N-DL2-9 2-92-92-92-92-9 2...