Оценок - 1, средний балл: 1
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
Other Operations
Additional Information
Precautions
Troubleshooting
Specifications
Note
Discs that this unit CAN play
General
Bluetooth device
CD player section
If you try to program 26 tracks/files or more, “FULL”
System
Compatible devices
Audio CD (CD-DA*1 tracks)
appears on the display.
The power does not turn on when the AC
There is no sound.
Compact disc digital audio system
CD-R/CD-RW that contains MP3/WMA files and
Tip
is finalized*2 correctly.
power cord is connected.
Laser diode properties
Make sure that this unit is not too far from the
Resume Play is available when using Program Play
Compatible USB devices
Bluetooth device (or smartphone), or that this
*1
Make sure the AC power cord is connected to
Emission duration: Continuous
mode in the USB function. Press after you
Compatibility requirements for the USB devices
CD-DA is the abbreviation for Compact Disc Digital
the wall outlet securely.
Laser output: Less than 44.6 μW
unit is not receiving interference from a
have stopped Program Play by pressing .
are as follows. Before using a device with this
Audio. It is a recording standard used for audio
(This output is the value measurement at a
wireless LAN, another 2.4 GHz wireless device,
Program Play starts from the point where you
CDs.
unit, check that it meets the requirements.
*2
The power does not turn on during
distance of 200 mm from the objective lens
or a microwave oven.
stopped.
Finalizing is the process to make the CD-R/CD-RW
discs playable on the consumer disc player
battery operation.
surface on the optical pick-up block with 7 mm
Compliance with USB 2.0 (Full Speed)
Check that the Bluetooth connection was
aperture.)
To display programmed track/file
products, and the finalizing can be enabled or
Make sure the batteries are inserted correctly.
Supports Mass Storage mode*
completed properly between this unit and the
Number of channels
information
disabled as optional settings during disc creation
Bluetooth device (or smartphone).
* Mass Storage mode is a mode that allows a USB
in most recording software.
2
After creating your own program, you can check
“LOW” and “BATTERY” are displayed
device to become accessible to a host device,
Perform pairing again (See “Making a wireless
Frequency response
information about programmed tracks/files.
alternately and the unit turns off
enabling file transfers. Most USB devices
Discs that this unit CANNOT play
connection with Bluetooth devices”).
automatically.
20 Hz 20,000 Hz +1/–2 dB
Keep away from metal objects or surfaces.
Press DISPLAY repeatedly and the display
support Mass Storage mode.
Wow and flutter
CD-R/CD-RW other than those recorded in
Replace all the batteries with new ones.
changes as follows:
Make sure that the Bluetooth function is
Below measurable limit
To select a memory on the device for
audio CD format or formats conforming to
activated on the Bluetooth device (or
Total programmed step number Last
playback or recording
ISO 9660 Level 1/Level 2 or Joliet
The unit enters standby mode
smartphone).
Bluetooth section
programmed track/file number and the total
If the USB device has more than one memory (for
CD-R/CD-RW of poor recording quality, CD-R/
unexpectedly.
Communication System
playing time*
example, an internal memory and a memory
CD-RW with scratches or that is dirty, or CD-R/
This is not a malfunction. The unit enters
The sound skips or the correspondence
Bluetooth Specification Version 3.0
card), you can select which memory to use and
CD-RW recorded using an incompatible
standby mode automatically after about
distance is short.
Output
* “--:--” appears for MP3/WMA discs and USB
then start playback or recording. Make sure to
recording device
15 minutes if there is no operation or audio
Bluetooth Specification Power Class 2
devices.
If a device that generates electromagnetic
select a memory before starting playback or
CD-R/CD-RW that is unfinalized or finalized
signal output. See “To use the power-
Maximum communication range
radiation, such as a wireless LAN, other
incorrectly
To cancel Program Play
recording as you cannot select a memory during
management function.”
Line of sight approx. 10 m*1
Bluetooth device(s), or a microwave oven is
operation.
Frequency band
Press to stop playback, and then press
nearby, move away if possible. Or use the
* and VOLUME + have a tactile dot.
Notes on discs
There is no sound.
2.4 GHz band (2.4000 GHz 2.4835 GHz)
MODE repeatedly until “PGM” disappears from
1
device and the unit away from such sources.
Connect the USB device to the (USB)
Before playing, clean the CD with
Modulation method
the display.
Make sure the appropriate function is selected
Remove any obstacle between this unit and
port .
a cleaning cloth. Wipe the CD
for the music or sound source you want to
FHSS
the device or move the device and the unit
Playing tracks/files repeatedly
from the center out. If there are
listen to.
Supported Bluetooth Profiles*2
Using the display
To delete all tracks/files in the current
2 Press USB to turn on the USB function.
away from the obstacle.
(Repeat Play)
program
scratches, dirt or fingerprints on
Unplug the headphones when listening
A2DP (Advanced Audio Distribution Profile)
3 Press USB-MEMORY SELECT until
the CD, a tracking error may occur.
Locate this unit and the device as close to each
AVRCP*3 (Audio/Video Remote Control Profile)
You can set the unit to repeatedly play CD-DA
Stop playback, and then press . “NO STEP”
through speakers.
“SELECT?” appears on the display.
other as possible.
Supported codec*4
appears and you can create a new program,
Do not use solvents such as
Checking MP3/WMA file information
tracks on an audio CD, or MP3/WMA files on a
benzine, thinner, commercially
Re-position this unit.
SBC (Subband Codec)
CD-R/CD-RW disc or on a USB device in normal
following the procedure “Creating your own
The sound is noisy.
Press DISPLAY repeatedly while playing
available cleaners or anti-static
Try using the Bluetooth device or smartphone
*1 The actual range will vary depending on factors
and program play modes.
program (Program Play).”
Is someone using a mobile phone or other
spray intended for vinyl LPs.
in another position.
such as obstacles between devices, magnetic
an MP3/WMA file on the disc/USB device.
equipment emitting radio waves near the unit?
1 Press CD or USB to turn on the CD
fields around a microwave oven, static
Do not expose the CD to direct sunlight or heat
If so, move the unit and the Bluetooth device
A connection cannot be established.
electricity, reception sensitivity, aerial
or USB function.
sources such as hot air ducts, or leave it in a
Presetting radio stations
away from such devices. Devices such as
performance, operating system, application
4 Press ENTER .
car parked in direct sunlight as there can be a
mobile phones, etc., can affect Bluetooth
Depending on the device to be connected, it
software, etc.
5 Press or repeatedly to select
considerable rise in temperature inside the car.
communication.
may require some time to start
*2 Bluetooth standard profiles provide the
communication.
You can store radio stations in the unit’s memory.
a memory number.
Do not stick paper or a sticker on the CD, or
specifications for Bluetooth communication
You can preset up to 30 radio stations, 20 for FM
Perform pairing again (See “Making a wireless
The memory name appears. The name will be
scratch the surface of the CD.
CD/MP3/WMA player
between devices.
The display changes as follows:
and 10 for DAB.
connection with Bluetooth devices”).
*3 Some operations may not be available
After playing, store the CD in its case.
2
displayed in various ways, depending on the
Proceed as follows.
Check that the Bluetooth device is compatible
depending on the device.
Song title ( )*1
specifications of the USB device.
The CD player does not play or “NO DISC”
Note on DualDiscs
with this unit. For the latest information on
*4 Codec: Audio signal compression and
If only one memory can be selected, proceed
is displayed even when a CD is in place.
To repeat
Do this
Presetting FM stations automatically
compatible Bluetooth devices, check the
conversion format
A DualDisc is a two sided disc product which
Artist name ( )*1
to step 6.
Place the CD with the label side up.
A single track/
1 Press MODE repeatedly
1 Press RADIO DAB/FM repeatedly to
mates DVD recorded material on one side with
information on the website. The URL is listed
Radio section
6
file
until “ 1” appears.
Press ENTER .
Clean the CD.
under “Compatible Bluetooth devices.”
select “FM.”
digital audio material on the other side.
Take out the CD and leave the CD
Frequency range
Album name ( )*1
2 Press or to
Notes on the USB device
However, since the audio material side does
compartment open for about an hour to dry
DAB (Band-III): 174.928 MHz 239.200 MHz
Pairing fails.
select a track/file that you
Operation is not always guaranteed, even if the
not conform to the Compact Disc (CD)
FM: 87.5 MHz 108 MHz (50 kHz step)
want to repeat. When you
moisture condensation.
standard, playback on this product is not
Bring the Bluetooth device closer to the unit.
Current file number and playing time*2
USB devices meet the compatibility requirements.
Intermediate frequency
want to specify a folder that
guaranteed.
The CD-R/CD-RW is blank or unfinalized.
When a USB device is connected, the unit reads all
Delete the model name of this unit from the
DAB (Band-III): 2.048 MHz
*1 If the file does not have corresponding ID3 or
contains MP3/WMA files,
the files on the device. If there are many folders or
There are no playable MP3/WMA files on the
Bluetooth device and perform pairing again
FM: 2.198 MHz
WMA tag information, the file name, “NO ARTIST,”
press (Folder) + or
files on the device, it may take a long time for the
Music discs encoded with copyright
disc.
(See “Making a wireless connection with
and “NO ALBUM” scroll instead of the song title,
2 Hold down RADIO DAB/FM-SCAN until
first to select a folder, and
unit to finish reading them.
protection technologies
Bluetooth devices”).
DAB (Band-III) frequency table (MHz)
artist name, and album name, respectively.
There is a problem with the quality of the
then press or to
“AUTO” flashes on the display.
Do not connect a USB device to the unit through a
CD-R/CD-RW, recording device or application
*2 The artist name or album name will change to this
This product is designed to playback discs that
Check that the Bluetooth device is compatible
Channel
Frequency
Channel
Frequency
USB hub.
in a few seconds.
select a file.
conform to the Compact Disc (CD) standard.
software.
with this unit. For the latest information on
3 Press to start Repeat
5A
174.928
10N
210.096
With some connected USB devices, after an
Recently, various music discs encoded with
Replace all the batteries with new ones if they
compatible Bluetooth devices, check the
operation is performed, there may be a delay
5B
176.640
10B
211.648
information on the website. The URL is listed
Checking the free space on the USB
Play.
copyright protection technologies are
are exhausted.
before it is performed by this unit.
marketed by some record companies. Please
under “Compatible Bluetooth devices.”
5C
178.352
10C
213.360
device
All tracks/files
1 Press MODE repeatedly
This unit may not support all the functions
until “ ” appears.
be aware that among those discs, there are
The sound drops out.
5D
180.064
10D
215.072
provided with a connected USB device.
Pairing using the NFC function fails.
1 Press MODE repeatedly to cancel
2 Press to start Repeat
some that do not conform to the CD standard
Reduce the volume.
6A
181.936
11A
216.928
3
The playback order on this unit may differ from
Press ENTER to store the station.
and may not be playable by this product.
Try pairing manually (See “Making a wireless
folder play mode, folder repeat play
Play.
the playback order on a connected USB device.
Clean the CD, or replace it if the CD is badly
6B
183.648
11N
217.088
The stations are stored in memory from lower
This unit cannot be used to charge USB devices.
damaged.
connection with Bluetooth devices”). Some
mode, program play mode or program
A selected
1 Press MODE repeatedly
6C
185.360
11B
218.640
On safety
NFC-compatible smartphones may not be
folder on an
until “ ” (Folder) and “ ”
frequencies to higher ones.
Place the unit in a location free from vibrations.
repeat play mode.
paired using the NFC function of this unit,
6D
187.072
11C
220.352
As the laser beam used in the CD player
MP3/WMA disc
appear.
Compatible Bluetooth devices
Clean the lens with a commercially available
section is harmful to eyes, do not attempt to
depending on the features or specifications of
7A
188.928
11D
222.064
or USB device
2 Select a folder by pressing
Compatibility requirements for the devices are as
blower.
disassemble the casing. Refer servicing to
the device.
(Folder) + or .
follows. Before using a device with this unit,
The sound may drop out or noise may be
7B
190.640
12A
223.936
qualified personnel only.
Relaunch “NFC Easy Connect” and move the
3 Press to start Repeat
check that it meets the requirements.
heard when using a poor quality CD-R/CD-RW
7C
192.352
12N
224.096
Should any solid object or liquid fall into the
smartphone slowly over the N mark .
Play.
or if there is a problem with the recording
7D
194.064
12B
225.648
Devices must conform to Bluetooth Standard
unit, unplug the unit, and have it checked by
version 3.0.
device or application software.
Check that the smartphone meets the
2 Press DISPLAY while the USB device is
Programmed
1 Program tracks/files (see
Presetting radio stations manually
8A
195.936
12C
227.360
qualified personnel before operating it any
compatibility requirements (See “Compatible
Devices must support A2DP (Advanced Audio
stopped.
tracks/files
“Creating your own program
You can manually tune in and store the radio
further.
Starting playback takes more time than
smartphones”).
8B
197.648
12D
229.072
(Program Play)”).
Distribution Profile) and AVRCP (Audio/Video
frequencies of desired stations.
Discs with non-standard shapes (e.g., heart,
usual.
8C
199.360
13A
230.784
2 Press MODE until “PGM”
Remote Control Profile).
square, star) cannot be played on this unit.
Radio
8D
201.072
13B
232.496
and “ ” appear on the
1 Press RADIO DAB/FM repeatedly to
The following discs take a longer time to start
NFC capability (required only when using the
Attempting to do so may damage the unit. Do
9A
202.928
13C
234.208
display.
playback.
select a band.
NFC pairing function of the unit).
not use such discs.
The sound is weak or reception is poor.
3 Press to start Repeat
A disc recorded with a complicated tree
9B
204.640
13D
235.776
For the latest information on compatible
Replace all the batteries with new ones.
Play.
structure.
On power sources
9C
206.352
13E
237.488
Bluetooth devices, including NFC-compatible
“FREE***G”/“FREE***M” (remaining storage
A disc that has many folders or non-MP3/
Move the unit away from nearby TVs.
smartphones, check the websites below.
9D
208.064
13F
239.200
For AC operation, use the supplied AC power
space on the device, in gigabytes/megabytes)
WMA files.
Extend the aerial to its full length, and reorient
To cancel Repeat Play
cord; do not use any other cord.
10A
209.936
http://support.sony-europe.com/
appears on the display.
it for best reception.
Press to stop playback, and then press
Unplug the unit from the wall outlet if it is not
USB device
If you are in a building, listen near a window.
Antenna
MODE repeatedly until “ ” (or “ 1”)
2 Tune to the desired station.
to be used for an extended period of time.
Checking the connected Bluetooth
Telescopic antenna
disappears from the display.
If a mobile phone is placed close to the unit, a
3 Hold down MANUAL PRESET until
When not using the batteries, remove them to
device name
The USB device does not work properly.
What is Bluetooth wireless
avoid damage that can be caused by battery
loud noise may be heard from the unit. Keep
Input
“DAB-xx” or “FM-xx” flashes on the
If you connect an incompatible USB device, the
the phone away from the unit.
Press DISPLAY while connecting the
Playing tracks/files in random order
leakage or corrosion.
AUDIO IN
display.
technology?
following problems may occur.
Stereo mini jack
Bluetooth device.
(Shuffle Play)
The TV picture is unstable.
(Example: DAB)
On placement
The USB device is not recognized.
(USB) port
You can set the unit to play CD-DA tracks on an
Bluetooth wireless technology is a short-range
File or folder names are not displayed on this
Do not leave the unit in a location near heat
If you are listening to an FM program near a TV
Type A, maximum current 500 mA, USB 2.0 Full
audio CD or MP3/WMA files on a CD-R/CD-RW
wireless technology that enables wireless data
unit.
sources, in a place subject to direct sunlight,
with an indoor antenna, move the unit away
Speed compatible
disc or on a USB device in random order.
communication between digital devices, such as
excessive dust or mechanical shock, or in a car
Playback is not possible.
from the TV.
1 Press CD or USB to turn on the CD
a computer and digital camera. Bluetooth
subject to the direct rays of the sun.
The sound skips.
Output
wireless technology operates within a range of
DAB/DAB+ radio stations are not received
(headphones) stereo mini jack
or USB function.
There is noise.
about 10 m.
Do not place the unit on an inclined or
properly.
unstable surface.
The sound output is distorted.
For 16 32 impedance headphones
Perform the DAB auto tune procedure (see “To
Checking the radio information
4
Connecting two devices as necessary is common,
Press PRESET + or until the preset
Do not place anything within 10 mm of the rear
Supported audio formats
but some devices can be connected to multiple
“OVER CURRENT” appears.
run the DAB auto tune manually”).
Press DISPLAY repeatedly while listening
number for the station you want flashes
of the cabinet. The ventilation openings must
Supported bit rates
devices at the same time.
be unobstructed for the unit to operate
An abnormal level has been detected in the
The current DAB/DAB+ service may not be
MP3 (MPEG 1 Audio Layer-3):
to the radio.
on the display.
You do not need to use a cable for connection,
properly and prolong the life of its
electrical current from the (USB) port .
available. Press TUNE + or to select a
32 kbps 320 kbps, VBR
2 Press MODE repeatedly until “SHUF”
nor is it necessary for the devices to face one
components.
Turn off the unit and remove the USB device
different service.
another, such is the case with infrared
WMA:
appears on the display.
from the (USB) port . Make sure there is
If you have moved to another area, some
48 kbps 192 kbps, VBR
technology. For example, you can use such a
Since a strong magnet is used for the speakers,
no problem with the USB device. If this
keep personal credit cards using magnetic
services/frequencies may have changed and
Sampling frequencies
device in a bag or pocket.
message persists, contact your nearest Sony
coding or spring-wound watches away from
you may not be able to tune to your usual
MP3 (MPEG 1 Audio Layer-3):
Bluetooth standard is an international standard
dealer.
the unit to prevent possible damage from the
broadcast.
32/44.1/48 kHz
5 Press ENTER to store the station.
supported by thousands of companies all over
Perform the DAB auto tune procedure to
The display changes as follows:
magnet.
WMA:
the world, and employed by various companies
If another station is already assigned to the
There is no sound.
re-register the contents of broadcasts.
32/44.1/48 kHz
worldwide.
When listening to FM
3
(Performing this procedure clears all previously
Press to start Shuffle Play.
selected preset number, that station is
On operation
The USB device may be connected incorrectly.
stored presets.)
General
Preset number*1 Station name*2 PTY
replaced by the new one.
Turn off the unit and reconnect the USB device.
Communication system and compatible
If the unit is brought directly from a cold to a
Speaker
label*2 (see “PTY (programme type)” in
Then turn on the unit.
Bluetooth profiles of the unit
warm location, or is placed in a very damp
Full range, 8 cm dia., 3.2 , cone type (2)
“Specifications”) Radio text*2 Frequency
Profile is standardization of the function for each
room, moisture may condense on the lens
After trying the suggested remedies, if the
There is noise, skipping, or distorted
Power output
Bluetooth device specification. The unit supports
inside the CD player section. Should this occur,
problem persists, unplug the AC power cord or
2.3 W + 2.3 W (at 3.2 , 10% harmonic
When listening to DAB
sound.
the following Bluetooth version and profiles:
the unit will not operate properly. In this case,
remove all the batteries. After all the indications
distortion)
on the display disappear, plug in the AC power
Preset number*1 DLS (Dynamic Label
Communication System:
remove the CD and wait about an hour for the
Turn off the unit and reconnect the USB device.
Power requirements
cord again, or re-insert the batteries. If the
Segment)*3 PTY label*3 (see “PTY (programme
To cancel Shuffle Play
Tip
moisture to evaporate.
Then turn on the unit again.
Bluetooth Specification version 3.0
230 V AC, 50 Hz (AC power supply)
problem persists, consult your nearest Sony
type)” in “Specifications”) Ensemble label*3
Press to stop playback, and then press
The preset radio stations remain in the unit’s
Compatible Bluetooth Profiles:
The music data itself contains noise, or the
9 V DC (6 R14 (size C) batteries)
dealer.
Channel Bit rate*4 Signal level*4
MODE repeatedly until “SHUF” disappears
memory even in the following situations.
On handling the unit
sound is distorted. Noise may have entered
A2DP (Advanced Audio Distribution Profile):
Power consumption
Component label
from the display.
The AC power cord is unplugged.
Do not leave the CD compartment open to
during the creation of audio files. Try
The batteries are removed.
Transmitting or receiving audio content of
AC 16 W
avoid dust and debris contamination.
re-creating audio files and use them to play on
Press ENTER to return to the normal display.
Tips
high-quality.
Power consumption (during standby mode)
this unit.
AVRCP (Audio Video Remote Control Profile):
Less than AC 0.9 W
*1 A preset number is displayed only when you are
During Shuffle Play, you cannot select the previous
On cleaning the cabinet
track/file by pressing .
Controlling A/V equipment; pausing,
Power consumption (during Bluetooth standby
listening to the preset radio station.
Listening to preset radio
The USB device cannot be connected to
stopping, or starting playback, etc.
Clean the cabinet, panel and controls using a
mode)
*2 “NO PS,” “NO PTY” or “NO TEXT” may appear if the
Resume Play is available when using Shuffle Play
soft cloth slightly moistened with a mild
the (USB) port .
mode in the USB function. Press after you
Less than AC 1.8 W
RDS broadcast is not properly received or the
have stopped Shuffle Play by pressing .
stations
Maximum communication range
detergent solution. Do not use any type of
The connector on the USB device or the USB
Battery Life*1, *2
station does not provide RDS services.
Shuffle Play starts from the point where you
Use Bluetooth devices within 10 m (line of sight)
abrasive pad, scouring powder, or solvent,
cable is being inserted backwards. Insert it to
Playback of CD
*3 “NO DLS,” “NO PTY” or “NOSIGNAL” may appear if
stopped.
of the unit.
such as alcohol or benzine.
the (USB) port in the correct direction.
Approx. 7.5 hours
no DLS, no PTY label or no ensemble label is
1 Press RADIO DAB/FM repeatedly to
Maximum communication range may shorten
Playback of USB device
received.
select a band.
If you have any questions or problems
“READING” is displayed for an extended
under the following conditions.
Approx. 7 hours (at 100 mA load)
*4 “---” may appear if no bit rate or no signal is
Creating your own program (Program
concerning your unit, consult your nearest Sony
time, or it takes a long time before
received.
Play)
There is an obstacle such as a person, metal, or
Approx. 3.5 hours (at 500 mA load)
dealer.
playback starts.
wall between the unit and Bluetooth device.
DAB reception
You can arrange the playing order of up to 25
Approx. 9 hours
About RDS features
tracks/files on a disc/USB device.
A wireless LAN device is in use near the unit.
The reading process can take a long time in the
following cases:
FM reception
A microwave oven is in use near the unit.
What is RDS?
1 Press CD or USB to turn on the CD
Approx. 9 hours
2
There are many folders or files on the USB
Press PRESET + or to select a stored
A device that generates electromagnetic
Messages
Introduced by the European Broadcasting Union
or USB function.
device.
Bluetooth
radiation is in use near the unit.
(EBU) in 1987, the Radio Data System (RDS) allows
preset number for the desired radio
The file structure is complex.
Approx. 10 hours
The unit is placed on a shelf made of steel.
information such as station names to be received
station.
DATA ERROR: An audio file is corrupted.
The memory is almost full.
*1 Measured by Sony standards. The actual
via the 57 kHz sub-carrier signal of FM broadcasts.
The internal memory is fragmented.
battery life may vary depending on the
ERASE ERROR: Erase of the audio files or folders
circumstances of the unit or operating
However, the availability of RDS data varies
failed.
To avoid the above problems, we recommend
conditions.
depending on the area. It therefore may not
The unit
that you adhere to the following guidelines:
FATAL ERROR: The USB device was removed
*2 When using Sony alkaline batteries
always be possible to receive RDS information.
2 Press MODE repeatedly until “PGM”
during recording or erase operation, and may
Keep the total number of folders on a USB
Dimensions
appears on the display.
Using the RDS functions
have been damaged.
device to 100 or less.
Approx. 380 mm × 158 mm × 235 mm (W/H/D)
The unit supports the following RDS functions.
FULL: You tried to program more than 25 tracks
Keep the total number of files per folder to
(incl. projecting parts)
or files (steps).
100 or less.
Mass
RDS function
Description
Connecting optional
Approx. 3.3 kg (incl. batteries)
LOW BATTERY: The batteries are almost
Station name
Displays the station name
Erroneous display
exhausted.
Supplied accessories
display
you are listening to.
components
The data stored on the USB device may be
3 Press or to select a track/
Steel cabinet
NO BT: Bluetooth connection is not established.
AC power cord (1)
PTY (programme Displays the programme
corrupted. Send the music data to the USB
NO DEV: No USB device is connected or the
Protecting sheet (1)
type)
type of the received
file.
You can enjoy the sound from an optional
device again.
Optimal performance
connected USB device has been removed.
programme.
When you want to specify a folder that
component, such as a portable digital music
This unit can display only numbers and letters
NO STEP: All of the programmed tracks/files
Design and specifications are subject to change
Limited performance
of the alphabet. Other characters will not be
RT (radio text)
Displays free-form textual
contains MP3/WMA files, press (Folder) + or
player, through the speakers of this unit.
have been erased.
without notice.
displayed correctly.
information.
first to select a folder, and then press
Be sure to turn off the power of each component
or to select a file.
before making any connections.
NO TRK: There are no playable MP3/WMA files
PTY (programme type)
For details, refer to the instruction manual of the
Interference from other devices
on the USB device.
“REC ERROR” appears.
This function indicates services or RDS data in
Notes
component to be connected.
Because Bluetooth devices and wireless LAN
NOSIGNAL: There is no supported DAB/DAB+
An error occurred during recording. Turn off the
programme type, such as News or Sports,
The RDS functions will not be activated if the FM
(IEEE802.11b/g/n) use the same frequency,
broadcast in your country or region or you
unit and remove the USB device from the unit.
transmitted in the DAB or RDS data.
station being received is not transmitting RDS
microwave interference may occur and resulting
have lost the reception of the selected DAB/
Then check the following:
If the received service or station does not transmit
data. They may also not work properly in areas
the programme type, “NONE” appears.
DAB+ broadcast.
where RDS transmissions are in the experimental
in communication speed deterioration, noise, or
Check the remaining storage space on the
NOT IN USED:
stage.
4 Press ENTER .
invalid connection if the unit is used near a
You tried to perform a specific
USB device. If there is insufficient space for
Programme type
Display
operation under conditions in which that
If the radio signal being received is weak, it may
wireless LAN device. In such a case, perform the
the recording, delete any unnecessary files or
No programme type
NONE
take time to receive the RDS data.
following.
operation is prohibited.
folders.
News
NEWS
Use the unit at least 10 m away from the
NOT SET: There is no stored preset station.
Check that the data to be recorded is not
Current Affairs
AFFAIRS
wireless LAN device.
NOT SUPPORT: An unsupported USB device is
corrupted.
Information
INFO
Selecting play mode
To AUDIO
If the unit is used within 10 m of a wireless LAN
connected.
Check that the file format to be recorded is
The track/file is programmed.
Sport
SPORT
IN jack
device, turn off the wireless LAN device.
OFF-AIR: The selected station or service is
compatible with the unit.
The program step number appears, followed
To component
Education
EDUCATE
currently not broadcasting.
(e.g.,portable
Use the Bluetooth device as close to the unit as
If the message still persists, contact your
You can set the unit to play tracks or files
by the total playing time.
digital music
possible.
PROTECT: The connected USB device is write-
nearest Sony dealer.
Drama
DRAMA
repeatedly or in random order while a disc/USB
(Example: audio CD)
Audio connection cable
player)
protected. Remove the USB device, and then
Culture
ARTS
device is stopped.
(not supplied)
Interference to other devices
clear the write protection, or use another USB
The USB device is not recognized.
Science
SCIENCE
Microwaves emitting from a Bluetooth device
Press MODE repeatedly.
device.
Turn off the unit and reconnect the USB device,
Varied
TALK
1
may affect the operation of electronic medical
Connect the AUDIO IN jack to the line
PUSH STOP: You tried to perform a specific
then turn on the unit.
Pop Music
POP
devices. Turn off the unit and other Bluetooth
operation that is prohibited while playing or
output jack of the portable digital music
The USB device is not functioning properly.
devices in the following locations, as it may
paused. Press to stop playback, and then
Refer to the USB device operation manual for
Rock Music
ROCK
cause an accident.
Step number
player or other component using an
try the operation again.
details on how to deal with this problem.
Easy Listening Music
EASY
audio connection cable (not supplied).
where inflammable gas is present, in a
REC ERROR: Recording did not start, stopped
Light Classical
CLASSICS
Each time you press the button, the indication
hospital, train, airplane, or a gas station
partway, or otherwise could not be performed.
Play does not start.
Last programmed track
2 Turn the connected component on.
Serious Classical
CLASSICS
changes as follows:
near automatic doors or a fire alarm
Turn off the unit and reconnect the USB device.
number
3 Press AUDIO IN and start playing
Other Music
OTHER M
Notes
Normal play (None)
sound on the connected component.
Play does not start from the first track.
Weather/meteorology
WEATHER
To be able to use the Bluetooth function, the
Set the play mode to Normal Play.
Finance/Business
FINANCE
Bluetooth device to be connected requires the
Single repeat ( 1)
Children’s programmes
CHILDREN
same profile as the unit’s.
MP3/WMA files cannot be played back.
Note also that even if the same profile exists,
Social Affairs
FACTUAL
All repeat ( )
devices may vary in function depending on their
The audio files may have inappropriate file
Religion
RELIGION
Total playing time*
The sound from the connected component is
specifications.
extensions. The file extensions supported by
output from the speakers.
Phone In
PHONE IN
Due to the characteristic of Bluetooth wireless
this unit are as follows:
Selected folder play ( )*
* “--:--” appears when programming an MP3/
technology, the sound played on the unit is
Travel
TRAVEL
To connect the unit to a TV or VCR, use an
MP3: file extension “.mp3”
WMA disc/USB device or when the total
slightly delayed from the sound played on the
WMA: file extension “.wma”
Leisure
LEISURE
playing time is longer than 100 minutes.
extension cable (not supplied) with a stereo-
Bluetooth device during listening to the music.
Selected folder repeat play ( , )*
Jazz Music
JAZZ
5
mini jack on one end and two phono plugs on
The audio files may have been created in
Repeat steps 3 and 4 to program
This unit supports security capabilities that comply
the other end.
formats other than MP3/WMA formats.
Country Music
COUNTRY
with the Bluetooth standard to provide a secure
additional tracks/files.
Shuffle play (SHUF)
connection when the Bluetooth wireless
The USB storage device uses a file system other
National Music
NATION M
6
Notes
technology is used, but security may not be
Press to start Program Play.
than FAT16 or FAT32.*
If connected to the monaural output jack of a
Oldies Music
OLDIES
enough depending on the setting. Be careful
Program play (PGM)
The created program remains available until
digital music player, sound may not be emitted
The USB storage device is partitioned. Only
Folk Music
FOLK
when communicating using Bluetooth wireless
you open the CD compartment, remove the
through the right speaker of the unit.
MP3/WMA files in the first partition can be
technology.
Documentary
DOCUMENT
USB device or turn off the power of the unit.
If connected to the line out jack of a digital music
played.
Program repeat play ( , PGM)
We do not take any responsibility for the leakage
To play the same program again, press .
player, distortion may occur. If the sound is
of information during Bluetooth communication.
Playback is possible up to 8 directory levels.
distorted, connect to the headphones jack instead.
* These functions are available only when playing
A device featuring the Bluetooth function is
The number of folders on the device exceeds
If connected to the headphones jack of a digital
MP3/WMA files on an MP3/WMA disc or USB
required to conform to the Bluetooth standard
255 (including the “ROOT” folder).
music player, increase the volume of the digital
device.
specified by Bluetooth SIG, and be authenticated.
music player, and then adjust the volume of the
The number of files on the device exceeds
Even if the connected device conforms to the
unit.
5,000.
above mentioned Bluetooth standard, some
devices may not be connected or work correctly,
The number of files per folder exceeds 999.
depending on the features or specifications of the
The files are encrypted or protected by
device.
passwords.
Noise or sound skips may occur depending on the
Bluetooth device connected with the unit, the
* This unit supports FAT16 and FAT32, but some USB
communication environment or the usage
storage media may not support both file systems.
environment.
For details, refer to the operation manual of the
USB storage device in question or contact the
manufacturer.
ZS-RS70BTB_CED [GB] 4-470-543-15(1)