Оценок - 1, средний балл: 4
(
)
)
|
Фрагмент инструкции
54 Photo (continued) Photo (continued) When viewing a photo you can change the on-screen appearance by applying rotate, pan, and zoom effects. These on-screen effects are only for enhancing the on-screen view and are not saved to the actual file. To access the photo viewing effects, press the MENU button on the remote control while viewing the photo that you want to manipulate. To select an effect, highlight the effect using the arrow keys on the remote control and press ENTER on the remote control to select the effect. Rotate clockwise 90 degrees: Selecting this option will rotate the image clockwise 90 degrees every time it is selected. Rotate counter-clockwise 90 degrees: Selecting this option will rotate the image counter-clockwise 90 degrees every time it is selected. Rotate 180 degrees: Selecting this option will rotate the image 180 degrees every time it is selected. Pan: When this option is selected, you can move the image using the arrow buttons on the remote control. Zoom: Use the down or right arrow to zoom in on an image. Use the up or left arrow to zoom out. The image can zoom 5 steps either direction. Exit: Use this button to exit from the effects menu or you can select the MENU button on the remote control. 55 Video Supported Video Formats Video Supported Video Formats . MPEG-1 (up to 8Mbps) . MPEG-2 (up to 8Mbps) . MPEG-4 (ASP - Advanced Simple Profile) . AVI (MPEG4 layer only, does not support uncompressed AVI) . XVID (with MP3 and PCM) Viewing a Video Once you enter the Video menu, you can view your list of videos. Use the selection arrows to navigate to the video folder you wish to view. Highlight and press ENTER to view the video folder. After you have selected a video folder, scroll down and highlight the video you wish to view and press ENTER or press PLAY to view the video. 56 Video (continued) How to use the ‘Search Video by Time’ feature In addition to a FF/RWD option (the default mode), your media player also allows you to search a video for a particular time frame. This option is called Jump in the Setup menu. If you want to use the Jump mode, you will need to change the setting of the Video Seek Mode before you view the video. To set your Video Seek Mode, please follow the steps below before viewing the video: 1. Select SETUP on the remote control unit. Scroll down and select General. 2. Scroll down and press ENTER to select Audio/Video. 3. Scroll down and press ENTER to select Video Seek Mode. There are two options: FF/Rev and Jump. FF/Rev is the default setting. With Jump, you can “jump” to the time you select within the video. In this window, FF/Rev is selected for the Video Seek Mode. Please select the Video Seek Mode before viewing your video. Once you make this selection, it will apply to all subsequent viewings, until it is changed. You cannot change the setting during video viewing. 4. Jump is selected here in Video Seek Mode. In the next few pages we will explain the Jump setting. 57 Video (continued) Search Video by Time (continued) 1. To select Jump in Video Seek Mode, click OK. The pop-up screen shown here will display. Click OK. 2. To use the new Jump setting with your video viewing, click MENU on your remote control unit. Select VIDEO. 3. Scroll down and press ENTER to make your selection in the Video category. 4. Select the video file to be viewed by scrolling and pressing ENTER. 58 Video (continued) Search Video by Time (continued) 1. The video will begin with this pop-up window. Enter the hour (H), minute (M) and second (S) that you want the video to “jump” to, or press Cancel if you choose not to use this feature. 2. After you press OK in the previous window, the video will “jump” to the time frame that was selected. 59 Video (continued) Using the Remote Control with Videos ENTER -Click ENTER to play your highlighted video. PLAY/PAUSE - To pause the video and to resume playing the video. + (VOLUME) - To increase the volume. -(VOLUME) - To decrease the volume. MUTE - To silence the audio portion of the video. FF - To fast forward through the video. DISPLAY -To view the track time; the resolution and the bit rate. REPEAT - To repeat the video after viewing it. Below are the on-screen indicators when a button is pressed. These icons will appear in the upper right corner of the screen: Play Pause Repeat Repeat off Fast Forward Mute sound Invalid option selected Fast Rewind 60 Search Click the SEARCH button on the remote control and the screen below will appear. This screen allows you to search for music tracks, videos, or photos. Use the up and down arrows on the remote control to navigate through the options. Press ENTER on the remote control to make a selection. Use the down arrow to navigate to the next field. Media Type: You can select All types of media or specify music, photo, or video. Search Type: There are two options available under the Search Type. • Starts With will search for files that begin with the characters entered in the Search For:field. For exam...