Оценок - 1, средний балл: 4
(
)
)
|
Фрагмент инструкции
3. When not using the unit for an extended period of time, or not use the batteries for a long time, remove them to prevent possible acid leakage or corrosion resulting in damage to your player or personal injury such as skin burns. 4. Bear in mind that battery life expectancy is based upon playing mode. Maximum battery power consumption happens at maximum settings. If sound gets distorted or if the unit fails to switch tracks, your batteries are weak. Replace both batteries, or use AC adaptor. (ADAPTOR NOT INCLUDED) 5. Never charge, heat, disassemble, or throw batteries into a fire. ”, this means your batteries are weak, replace them or use the AC adaptor. (ADAPTOR NOT INCLUDED) 6. If the display shows the symbol “ 7. If the display is blank - no numbers show when power is turned on, the batteries are dead. Replace them or use the AC adapter. (ADAPTOR NOT INCLUDED) AUTO POWER ON FUNCTION The power turns on automatically when the PLAY/PAUSE button is pressed. AUTO POWER OFF FUNCTION The power turns off immediately after the disc compartment is opened. When all the tracks on a disc have been played, or the Stop button is pressed, the power turns off automatically within 60 seconds if no button is pressed. If you pressed the Stop button twice the power will turn off CHARGE SWITCH 2 THE HOLD FUNCTION It is useful during playing, the function will lock the key on the panel to protect the mistake in the Playing. During playing slide the HOLD switch to “ON” position, the “HOLD” will appear in the display, the key on the panel will be locked, the panel key is disabled. Slide the HOLD Switch to “OFF” position to stop the function. LISTENING WITH HEADPHONES Connect the plug of the stereo headphone into the headphone jack (marked phones) before use the unit. CAUTION: Hearing experts advise against exposure to continuous extended play at loud volume levels while using headphones, possible hearing loss may result. If you experience a ringing in the ears, reduce volume or discontinue use. We want you listening for a life time. PLAYING A DISC Be sure to reduce the volume before plugging in or unplugging the headphones/ earphones 1. Plug the cord from a pair of headphone/earphone into the PHONES jack. 2. Slide the Door Open button to open the CD door. 3. Hold the disc with the label side up and press it onto the spindle until it “clicks” into place. 4. Close the disc compartment, press PLAY/PAUSE button, the disc will begin to spin, the display will indicate “01”, play will begin immediately from track number 1. 5. Adjust the volume as desired. 6. Set the BASS BOOST function as desired. 7. To stop play temporarily, press the PLAY/PAUSE button. • The elapsed playing time flashes in the display. • Press the PLAY/PAUSE button again to resume. 8. To stop play, press the Stop Button, and the power turns off automatically after a while. Note:Both 8cm and 12cm discs can be played in the unit. Place only one disc at a time in the CD compartment. TRACK SEARCH • Press the and button during play to skip to the desired track. to skip to the next track on the disc. • Press the to skip to the beginning of the track currently playing. • Press the twice or more to skip to previous tracks. • Press the FORWARD/REVERSE SEARCH Press and hold the skip ( ) button during play to scan the disc at high speed. When the desired section of the disc is found, release the button. Normal play will resume. ----forward ----reverse ) while playing, it will scan the current playing track forward at high speed. • If you press and hold the skip button ( ) while playing, it will scan the current playing track backwards at high speed. • If you press and hold the skip button ( 3 ON OFF ON OFF BASS BOOST Use the Bass Boost function to increase the bass output when listening with headphones. During bass boost on setting, some- BASS BOOST times, you may hear some distortion, adjust the volume control to a lower level when using the bass boost feature. PROGRAMMED PLAY The tracks on the disc can be programmed for play in any order. (Up to 24 tracks can be programmed.) During programming, “PROG” flashes in the display. NOTE: Programming is possible in the STOP mode. Program number 1 2 3 Track number 3 5 9 1. Press the PROGRAM button in the STOP MODE. The “PROG” appears in the display. ) to select the first track to be programmed. 2. Press the skip button ( 3. Press the PROGRAM button again to enter the track into the memory. 4. Repeat steps 2 to 3 to program other track till you finish. 5. After programming is finished, press the PLAY/PAUSE Button. Note: Programmed play will begin automatically if you program 24 tracks. “PROG” shows steady in the display and programmed play begins. 6. The player stops automatically after all programmed tracks have been played. To play the same program again, press the PLAY/PAUSE Button. The programming will be cleared if 1. Open the door 2. Power off 3. After random play 4. To check the program, press the STOP Button and then the PRO...