Оценок - 2, средний балл: 4.5
(
)
)
|
Фрагмент инструкции
¶ Do not leave the products or batteries in the car, particularly above the dashboard, for this may lead to malfunction or damage due to solar heat. ¶ If the unit is connected to a car stereo using an audio cord, noise may sometimes interfere. Caution: Read this page carefully to ensure safe operation. *For other countries AC voltage selection This unit operates on 110-120 or 220-240 AC voltage. The AC voltage selector switch on the AC adapter is set to the voltage that prevails in the area to which the unit is shipped. Before connecting the power cord to your AC outlet, make sure that the setting position of this switch matches your line voltage. If not, it must be set to your voltage in accordance to the following direction. Note: Our warranty does not cover damage caused by excessive line voltage due to improper setting of the AC voltage selector switch. AC voltage selector switch Move switch lever to match your line voltage with a small screwdriver or other pointed tool. The marking is located on the bottom side says that this product has been classified as Class 1. It means that there is no danger of hazardous radiation outside the product. The marking of products using lasers (Except for some areas). CLASS 1 LASER PRODUCT Part names Player Liquid crystal display OPEN _ + DC IN PHONES/LINE OUT REMOTE VOLUME HOLD 1 4 3 2 5 7 6 8 9 0 - _ + DC IN 1 2 3 4 5 6 8 7 1 D.A.S.C. display Illuminated when the sound skip guard function is on. 2 B.BOOST display Illuminated when the bass tones have been boosted. 3 RANDOM display Illuminated when random playback has been selected. 4 Repeat display Illuminated when repeat playback has been selected. 5 Battery display Illuminated when the batteries are being recharged. 6 Information display area Displays track numbers, amount of time elapsed, titles and other disc information, and the status of the equipment. 7 mark Illuminated if files that can be played back are contained within the selected folder when media on which MP3 and WMA files are stored has been inserted into the player (blinks during folder selection). 8 mark Illuminated if other folders are contained within the selected folder when media on which MP3 and WMA files are stored has been inserted into the player (blinks during folder selection). 1 MODE key Used to switch between the playback mode, the display mode and other modes. 2 1, . keys Used for fast forward and fast reverse, and to select folders. 3 4, . keys Used to search the beginning of tracks, to set up the various modes, and to select folders. 4 STOP/OFF key Used to stop, to switch off the power supply, and to recharge the batteries. 5 PLAY/PAUSE key Used for playback, pausing, and to switch on the power supply. 6 D.A.S.C. (Digital Anti-Shock Circuit) key Used to switch across to the sound skip guard function. 7 Liquid crystal display 8 DC IN (external power supply terminal) Used for connecting the AC adapter supplied. Used for connecting the car battery adapter when using a car battery for playback purposes. 9 REMOTE PHONES/LINE OUT terminals Used for connecting the remote controller or headphones supplied. Used for connecting an amplifier or speakers built into amplifiers when used as a LINE OUT terminal. Used for connecting the car cassette adapter when using for playing back car audio units. 0 VOLUME knob Used to adjust the volume. - OPEN/HOLD switch Used when the top cover is to be opened and when switching the hold function between on and off. 2 1 3 4 6 5 1 PHONES terminal Used to connect the headphones. 2 VOLUME knob Used to adjust the volume. 3 HOLD switch Used to switch the hold function between on and off. 4 4 key (SKIP DOWN) Used for searching for the beginning of tracks, etc. 5 STOP 7 key Used to stop the player and switch off the power. 6 3/. key (PLAY/SKIP UP) Used for playing and searching for the beginning of tracks, etc. Remote controller (DPC-MP727) (Except for U.S.A., Canada and Australia) Remote controller and headphone connections ¶ The headphones are connected to the PHONES terminal on the remote controller. The headphones can also be connected directly to the player when the remote controller is disconnected. Inserting and recharging the batteries Inserting the batteries in the player 1 Open the cover. OPEN 2 Taking care over the positive (+) and negative (-) poles, insert the batteries. ¶ When running the player on normal dry-cell batteries, use size AA alkaline batteries (LR6) available on the open market. ¶ As playback time will be greatly reduced when manganese batteries are used, ensure that size AA alkaline batteries are used. ¶ Make sure that both batteries are replaced when changing batteries. ¶ Do not use rechargeable batteries and size AA alkaline batteries together. 3 Close the cover. Using the external battery case Using the battery case together with the rechargeable batteries or size AA alkaline batteries set in the player will provide extended periods of continual play. 1 Remove the cover on the battery case....