Оценок - 2, средний балл: 5
(
)
)
|
Фрагмент инструкции
44 EN Program timer The program timer can store the timer operating hours and its contents so the timer operation can be activated or deactivated as required at any time.The program timer can be activated on any time. Timer playback using program timer Use the following procedure to play the selected source at the selected time period. MD PERSONAL STEREO SYSTEM STANDBY /TIMER DISC LOADING MECHANISM ON/STANDBY ONE RANDOM PGM REPEAT TRACK NO. SLEEP DISC O.T.T. PROG. TOTAL O.T.E. HIGH-SPEED AUTO TUNED SP REC LP MD-EDIT LOUDkHz MHz MDMD CDCD TUNERFM/AM STOP MDCD MENU SOUND MD REC BEST HITS AUX VOLUME/MULTI CONTROL SET TUNING MODE / TUNING4TUNING/. b PUSH OPEN MENU VOLUME / MULTI CONTROL ON/STANDBY SET/ TUNING MODE 2Press the MENU key. 3Press the VOLUME/MULTI CONTROL keys so that “TIMER SET?” is displayed, then press the SET/ TUNING MODE key. 4Press the VOLUME/MULTI CONTROL keys so that “PROG. ON” is displayed, then press the SET/ TUNING MODE key. “PROG.” blinks PROG. SP 5Select the time to start timer playback (ON time). Press the VOLUME/MULTI CONTROL keys to select the figure of hour, then press the SET/TUNING MODE key. Applicationsection Timer PROG. SP PROG. SP Timer ON time 7 Setting 1Make preparations according to the source to be played. CD :Load a CD. Also select the figure of minute in the MD : Load an MD. same way as above. Radio : Preset stations (page 8 and 9). AUX component : Make the required preparation for playback by connecting an AUX component. Be sure to set the timer for the AUX source component connected to the AUX IN jacks. Continued on next page \ 45 EN 6Select the time to stop timer playback (OFF time). Set in the same way as the ON time. number of the desired station, then press the SET/TUNING MODE key. This operation is not required when an input source other than “TUNER” is se- lected. 0Press the VOLUME/MULTI CON- TROL keys to adjust the listening Timer OFF time PROG. SP PROG. SP 7Press the VOLUME/MULTI CONTROL keys to select “PLAY” or “AI PLAY”, then press the SET/TUNING MODE key. “PLAY” : The source will be played at the adjusted volume before entering the STANDBY mode. “AI PLAY” : The listening volume increases gradually from the start of timer playback until it reaches a certain level. Display when “PLAY” is selected PROG. SP 8Press the VOLUME/MULTI CONTROL keys to select the music source to be input, then press the SET/TUNING MODE key. The input source can be selected from “CD”, “MD”, “AUX” (AUX component) and “TUNER” (radio). 9To listen to radio broadcasting, press the VOLUME/MULTI CONTROL keys to select the preset volume. The source will be played at the ad justed volume. This step is not required when “AI PLAY” is selected. 7 Execution !Press the ON/STANDBY key (or POWER key on the remote control) to put the unit in the STANDBY mode. The STANDBY/TIMER indicator lights in green. When the set ON time comes, the timer program is executed and playback starts. 46 EN To cancel program timer : Perform steps 2 to 4 and select “TIMER OFF” of “Program timer” (page 45) until “PROG.” is not lit. To check or change the timer setting : Restart the procedure from step 1 again. . Be sure to adjust the time of the day (page 7) before using the timer functions. . The program timer cannot be used for program playback of CD or MD. . Even when the program timer is canceled, previously made setting is stored in memory and remains until new timer information is set the next time. . When the STANDBY/TIMER indicator is blinking in green, the timer setting or clock setting is erroneous. Check and correct them as required (pages 7 & 45 to 46). Timer recording using program timer The audio of TUNER (radio) or AUX started by the timer playback at the set time can be recorded onto an MD during timer playback. Timer MD PERSONAL STEREO SYSTEM STANDBY /TIMER DISC LOADING MECHANISM ON/STANDBY ONE RANDOM PGM REPEAT TRACK NO. SLEEP DISC O.T.T. PROG. TOTAL O.T.E. HIGH-SPEED AUTO TUNED SP REC LP MD-EDIT LOUDkHz MHz MDMD CDCD TUNERFM/AM STOP MDCD MENU SOUND MD REC BEST HITS AUX VOLUME/MULTI CONTROL SET TUNING MODE / TUNING4TUNING/. b PUSH OPEN MENU VOLUME / MULTI CONTROL ON/STANDBY SET/ TUNING MODE 7 Setting 1Make preparation for recording. MD : See steps 1 to 3 in “Recording CD onto MD” (page 16). 2Perform steps 2 to 6 of “Timer playback using program timer” (page 45 to 46). 3Press the VOLUME/MULTI CONTROL keys to select “REC”, then press the SET/TUNING MODE key. Applicationsection PROG. SP Continued on next page \ 47 EN 4Press the VOLUME/MULTI CONTROL keys to select “TUNER” or “AUX”, then press the SET/TUNING MODE key. “TUNER”: Radio “AUX” : AUX input source 5To record a radio station, press the VOLUME/MULTI CONTROL keys to select preset station to be recorded, then press the SET/ TUNING MODE key. 7 Execution 6Press the ON/STANDBY key (or POWER key on the remote control) to put the unit in the STANDBY mode. The STANDBY/TIMER indicator lights in green. When the set ON time comes, the timer program is executed and re...