Оценок - 4, средний балл: 4.3
(
)
)
|
Фрагмент инструкции
5 Press AMS or YES. When the track selected in Step 4 has been erased, “Complete!!” appears for a few seconds and the total number of tracks in the music calendar decreases by one. The track following the erased track begins playing. (If you erase the last track, the track preceding the erased track starts playing.) 6 Repeat Steps 1 to 5 to erase more tracks. To cancel the Erase Function Press EDIT/NO or p. Note If “Erase ???” appears in the display, the track was recorded or edited on another MD deck and is record-protected. If this indication appears, press AMS or YES to erase the track. Erasing all tracks on an MD Erasing a recordable MD deletes the disc name, all recorded tracks, and titles. 1 While the deck is stopped, playing, or pausing, press EDIT/NO to display “Edit Menu”. 2 Turn AMS until “All Erase ?” appears in the display. 3 Press AMS or YES. “All Erase??” appears in the display and all tracks in the music calendar start flashing. 4 Press AMS or YES. When the disc name, all recorded tracks, and titles on the MD have been erased, “Complete!!” appears for a few seconds and the music calendar disappears. To cancel the Erase Function Press EDIT/NO or pto turn off the “All Erase ?” or “All Erase??” indication. z You can undo the Erase Function Use the Undo Function immediately after you erased the track (see page 36). 28EN Editing Recorded MDs Editing Recorded MDs Erasing a Part of a Track (A-B ERASE Function) You can specify a portion within a track and erase the portion with ease. It is convenient when erasing unnecessary sections after recording satellite broadcast or FM broadcast. Example: Erasing a part of track A 0/) a.. YES Track number Erasing Point A Point B A #1 A #2 A #3 2 B 31 C 1 A (#1+#3) 2 B 3 C ) 0 ¤ =+ . pr EDIT/NO = AMS + 1 While the deck is stopped, playing, or pausing, press EDIT/NO to display “Edit Menu”. 2 Turn AMS until “A-B Erase ?” appears in the display. 3 Press AMS or YES. 4 Turn AMS to select the number of the track, then press AMS or YES. “-Rehearsal-” and “Point A ok?” alternates in the display while the deck plays back the selected track from the beginning. 5 While monitoring the sound, turn AMS to find the starting point of the portion to be erased (point A). You can select the unit by which the starting point is shifted. Press the 0or )button to select frame*, second, or minute. For frame, the number of frames appears when you turn the AMS control; for second and minute, “s” or “m” flashes in the display. * 1 frame is about 12 ms. 6 If the point A is still incorrect, repeat Step 5 until it is correct. 7 Press AMS or YES if the position is correct. “Point B set” appears in the display and playback for setting the end point of the portion to be erased (point B) starts. 8 Continue playback (or press 0or )) until the deck reaches point B, then press AMS or YES. “A-B Ers” and “Point B ok?” alternates in the display while the deck repeats a portion of a few seconds before point A and after point B successively. 9 Repeat Step 5 if point B is not correct. 10 Press AMS or YES when the position is correct. “Complete!!” appears for a few seconds and the portion between point A and B is erased. To cancel the A-B Erase Function Press EDIT/NO or p. Note If “Impossible” appears in the display, this means: – You specified point B comes before point A. Point B should be specified after point A. – The specified portion cannot be erased. This sometimes happens when you’ve edited the same track many times, and is due to a technical limitation of the MD system, not a mechanical error. 29EN Editing Recorded MDs Editing Recorded MDs Dividing Recorded Tracks (DIVIDE Function) With the Divide Function you can mark a track number at places that you want to randomly access afterwards. Use this function to add tracks to MDs recorded from an analog source (and therefore contain no track numbers), or to divide an existing track into multiple portions for locating positions in the middle of a track. When you divide a track, the total number of tracks on the MD increases by one and all tracks following the divided track are renumbered. Example: Dividing track 2 to create a new track for C Track 12 3 number Dividing A B C D 1 2 4 Track 2 is divided andnew track is created f3 a or C A B C D 0/) a.. YES ) 0 ¤ =+ . pr EDIT/NO =AMS + Dividing a track after selecting the track 1 While the deck is stopped, playing, or pausing, press EDIT/NO to display “Edit Menu”. 2 Turn AMS until “Divide ?” appears in the display, then press AMS or YES. 3 Turn AMS to select the track to be divided and press AMS or YES. “-Rehearsal-” appears in the display and the deck plays back the selected track from the beginning. 4 While monitoring the sound, turn AMS to find the point to divide the track. You can select the unit by which the starting point is shifted. Press the 0or )button to select frame, second, or minute. For frame, the number of frames appears when you turn the AMS control; for second and minute, “s” or “m” flas...