Оценок - 3, средний балл: 4.7
(
)
)
|
Фрагмент инструкции
The corresponding buttons on the card remote commander control the same functions as those on the unit. A OFF button To power off; stop the source. B Volume control dial/select button page 15 To adjust volume (rotate); select setup items (press and rotate). C SOURCE button To power on; change the source (Radio/CD/ AUX/PD*1)*2. D Display window E AUX input jack page 17 To connect a portable audio device. F OPEN button page 7 G ALBM +/– buttons (during MP3/WMA/ AAC playback) To skip albums (press); skip albums continuously (press and hold). H Receptor for the card remote commander I SEEK –/+ buttons CD/PD*1: To skip tracks (press); skip tracks continuously (press, then press again within about 1 second and hold); reverse/fastforward a track (press and hold). Radio: To tune in stations automatically (press); find a station manually (press and hold). J MODE button page 11 To select the radio band*2; select the play mode of iPod*1. K BTM/CAT button (CDX-M50IP/M30) page 11 To start the BTM function (press and hold). AF (Alternative Frequencies)/TA (Traffic Announcement)/PTY (Program Type) button (CDX-MR50IP) page 12 To set AF and TA (press); select PTY (press and hold) in RDS. L Frequency select switch (CDX-M50IP/ M30 only) (located on the bottom of the unit) See “Frequency select switch” in the supplied installation/connections manual. M Number buttons CD/PD*1: (3): REP page 11 (4): SHUF page 11 (6): PAUSE To pause playback of a CD on this unit. To cancel, press again. Radio: To receive stored stations (press); store stations (press and hold). N DSPL (display)/SCRL (scroll) button page 11 To change display items (press); scroll the display item (press and hold). O RESET button page 6 P Z (eject) button page 7 To eject the disc. Q Disc slot page 7 To insert the disc. continue to next page t Card remote commander RM-X151 10 The following buttons on the card remote commander have also different buttons/functions from the unit. Remove the insulation film before use (page 6). qk< (.)/, (>) buttons To control CD/radio/PD*1, the same as (SEEK)–/+ on the unit. Setup, sound setting, etc., can be operated by <,. qlDSPL (display) button To change display items. w;VOL (volume) +/– button To adjust volume. waATT (attenuate) button To attenuate the sound. To cancel, press again. wsSEL (select) button The same as the select button on the unit. OFF DSPL SCRL SELSOURCE MODE 1 32 4 65 ATT VOL + – + – 31qkqlw; wg wd M (+)/m (–) buttons To control CD/PD*1, the same as (ALBM) +/– on the unit. Setup, sound setting, etc., can be operated by Mm. wf SCRL (scroll) button To scroll the display item. wg Number buttons To receive stored stations (press); store stations (press and hold). *1 CDX-M50IP/MR50IP only *2 In the case of a CD/MD changer or SAT tuner being connected; when (SOURCE) is pressed, the connected device (“MD,” “XM” or “SR”) will appear in the display, depending on which device is connected. Furthermore, if (MODE) is pressed, you can switch the changer, or SAT tuner band. (A SAT tuner can only be connected to the CDXM50IP/ M30.) Note If the unit is turned off and the display disappears, it cannot be operated with the card remote commander unless (SOURCE) on the unit is pressed, or a disc is inserted to activate the unit first. About AUX cap When not using the AUX input jack (5), use the supplied AUX cap to prevent water entering. Keep the AUX cap out of the reach of children to prevent accidental swallowing. wa ws q; wd wf CD CD Radio Storing and receiving stations For details on selecting a CD/MD changer, see page 18. Display items A Source B Track number/Elapsed playing time, Disc/ artist name, Album number*, Album name, Track name, Text information, Clock * Album number is displayed only when the album is changed. To change display items B, press (DSPL). Tip Displayed items will differ, depending on the disc type, recording format and settings. For details on MP3/ WMA/AAC, see page 20. Repeat and shuffle play 1 During playback, press (3) (REP) or (4) (SHUF) repeatedly until the desired setting appears. Select To play TRACK track repeatedly. ALBUM* album repeatedly. SHUF ALBUM* album in random order. SHUF DISC disc in random order. * When an MP3/WMA/AAC is played. To return to normal play mode, select “ OFF” or “SHUF OFF.” Caution When tuning in stations while boating, use Best Tuning Memory (BTM) to prevent an accident. Storing automatically — BTM 1 Press (SOURCE) repeatedly until “TUNER” appears. To change the band, press (MODE) repeatedly. 2 Press and hold the select button. The setup display appears. 3 Press the select button repeatedly until “BTM” appears. 4 Press (SEEK) +. The unit stores stations in order of frequency on the number buttons. A beep sounds when the setting is stored. Storing by the BTM button (CDX-M50IP/M30 only) Press and hold (BTM) until “BTM” flashes, instead of steps 2 to 4. Storing manually 1 While receiving the station that you want to store, press and hold a number button ((1) to (6)) until “ME...
Эта инструкция также подходит к моделям:Плееры - CDX-M50IP (1.83 mb)