Оценок - 3, средний балл: 3.3
(
)
)
|
Фрагмент инструкции
b e E b Attach the player to the batterycharging case with speakers. 1 While pressing OPEN on the battery-charging case, open the case. 2 Insert the player as shown below. b Removing the player from the battery-charging case b Charge the rechargeable battery. b “Charging” flashes when charging starts. The battery condition is indicated by the “3-color info-LED” on the player: Red t Orange t LED off (approx. 2.5 hours later) The player can be used when the LED has turned off. Note If you start playback or do another operation during charging, the charging will stop. Operating Instructions Portable MiniDisc Player MZ-E810SP © 2003 Sony Corporation Printed in Japan 3-251-253-12(1) WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture. Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. To prevent fire, do not cover the ventilation of the apparatus with newspapers, table- cloths, curtains, etc. And don’t place lighted candles on the apparatus. To prevent fire or shock hazard, do not place objects filled with liquids, such as vases, on the apparatus. Certain countries may regulate disposal of the battery used to power this product. Please consult with your local authority. Caution The use of optical instruments with this product will increase eye hazard. CAUTION — INVISIBLE LASER RADIATION WHEN OPEN DO NOT STARE INTO BEAM OR VIEW DIRECTLY WITH OPTICAL INSTRUMENTS Information IN NO EVENT SHALL SELLER BE LIABLE FOR ANY DIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY NATURE, OR LOSSES OR EXPENSES RESULTING FROM ANY DEFECTIVE PRODUCT OR THE USE OF ANY PRODUCT. BVarious ways of playback Remote control Volume control VOL +, – HOLD DISPLAY SOUND x +, – P MODE/ Jog lever (. • u/ENT • >) Player Selecting the play mode You can select from the various play modes using the P MODE/ button on the remote control. 1 Press P MODE/ repeatedly. Each time you press the button, the play mode changes as follows: Play mode indication Display* (none) (normal play) 1 (single-track play) (bookmark play) SHUF (shuffle play) PGM (program play) * Group play mode ( ) appears whenever you play a disc with group settings. For more details, see “Using the group function.” Playing a track repeatedly (Repeat Play) You can use the repeat function for normal play, single-track play, shuffle play, and program play mode. 1 During playback in the selected play mode, press and hold P MODE/ for 2 seconds or more. “ ” appears in the display. Repeat play indication To cancel repeat play Press and hold P MODE/ for 2 seconds or more. z By pressing the P MODE/ button during repeat play, you can change the play mode to be used with repeat play. To Pause Cue to the current track or the previous track Cue to the next track Go backwards or forward while playing Searching for a specific position while viewing a elapsed time (Time search) Searching for a specific track while viewing track numbers (Index search) Cue to the beginning of every 10th track (only during playback of the disc with no group settings1)) Remove the MD 1) For more details, see “Using the group function.” 2) Once you open the lid, the point to start play will change to the beginning of the first track. About the “3-color info-LED” The LED indicates the current operating mode, charging status, and battery condition. For details about the charging status, see “Getting started.” For details about the battery condition, see “When to replace or recharge the battery” on the back page. LED color Red Green Orange Do this (Beeps in the headphones/earphones) Press the jog lever (u) on the remote control (continuous short beeps). (Press u on the player.) Press the jog lever (u on the player) again to resume play. Slide the jog lever towards . on the remote control (three short beeps). (Press . on the player.) Slide the jog lever towards > on the remote control (two short beeps). (Press > on the player.) Slide and hold the jog lever towards . or > on the remote control. (Press and hold . or > on the player.) While the player is paused, slide and hold the jog lever towards . or > on the remote control. While the player is stopped, slide and hold the jog lever towards . or > on the remote control. Press + or – button. Press x, and then slide OPEN.2) 1 2 to a wall outlet Playing an MD Insert an MD. 1 2 3 Play an MD. (.•u/ENT•>) ., > u VOL +, – +, – x x VOL+ VOL– 1 Press the jog lever (u) on the remote control. (Press u on the player.) A short beep sounds in the headphones/earphones. The LED lights up. 2 Turn the volume control towards VOL + or – on the remote control to adjust the volume. (Press VOL + or – on the player. ) The volume indicator appears in the display, allowing you to check the volume level. To stop play, press x. A long beep sounds in the headphones/earphones. Playback starts from the point you last stopped playing. To start playback from the beginning of the disc, press and hold the jog lever (u) for 2 seconds or more on ...