Оценок - 2, средний балл: 4
(
)
)
|
Фрагмент инструкции
160 min. 1) For better sound quality, record in normal stereo (SP) or LP2 stereo mode. 2) If you record a stereo source in monaural, the sound from left and right will be mixed. 3) When using an 80-minute recordable MD 4 Press N while pressing REC. 5 Play the sound source. To stop recording Press x. The recorder remains at the previous setting of the recording mode when you record the next time. When you do not want “LP:” added automatically at the beginning of a track When recording in MDLP mode, this recorder adds “LP:” at the front of every track name automatically. “LP:” appears when you try to play or edit these tracks on a recorder or player that does not support MDLP mode (but not on a recorder or player that supports MDLP mode). If you change the recorder setting so that “LP:” is not added, you’ll be able to enter longer track names by using the entire text string. 1 While the recorder is stopped, press MENU. 2 Press > or . repeatedly until “OPTION” flashes in the display, and then press ENTER. 3 Press > or . repeatedly until “LPStmp” flashes in the display, and then press ENTER. 4 Press > or . repeatedly until “OFF” flashes in the display, and then press ENTER. If you want “LP:” added, select “ON” in this step, and then press ENTER. z • Audio components that support the LP2 stereo or LP4 stereo modes are indicated by the or logo marks. • You can achieve high sound quality and rich tones when recording in SP stereo (or monaural) thanks to the newly developed DSP TYPE-R for ATRAC (Adaptive TRansform Acoustic Coding) (page 15). Notes • It is recommended that you use the AC power adaptor for long recordings. • During monaural recording of a stereo sound source connected through the digital (optical) input jack, you can still monitor the recorded sound in stereo by using headphones or earphones connected to the i jack. • When you record in LP4 mode, momentary noise may be produced on very rare occasions with certain sound sources. This is because of the special digital audio compression technology that enables a recording time of 4 times longer than normal. If noise is produced, it is recommended that you record in normal stereo or LP2 mode to obtain better sound quality. Recording tracks using the group function (Group Mode Recording) What is the group function (Group Mode)? It is a function that allows you to separate tracks on a disc into different groups for playback, recording and editing. When group mode is OFF. 123456789 Disc Track number When group mode is ON. 123 123Disc Group 1 Group 2 Group 3 Track number Track number Track number 412 It is convenient for managing multiple CD albums recorded in MDLP (LP2 stereo/ LP4 stereo) mode onto a single MD. You can create a maximum of 99 groups on a disc. How is group information recorded? When recording in group mode, the group information is written to the disc name recording area. This information consists of text strings that are written as shown in the following example. Disc name recording area Example 1 23 1 Disc name: “Favorites” 2 Group name for tracks 1 to 5: “Rock” 3 Group name for tracks 6 to 9: “Pops” Therefore, the above character string is displayed in its entirety as the disc name if you load an MD recorded in group mode into a system that does not support group mode, or if you try to edit the contents of a disc on this recorder with group mode turned off. It is possible to change the character string by doing “Relabeling recordings” (page 36) procedure in the “Labeling/ relabeling recordings”. Note that if you rewrite this character string by mistake, you may be unable to use the group function of that MD. Notes • The group function setting is stored even if you eject the MD or turn off the recorder. • In group mode, the recorder treats all tracks without group settings as belonging to the last group on the disc. The last group is indicated in the display window on the recorder as “GP --”. Within a group, the tracks appear in their order on the disc, not their order within the group. GROUP END SEARCH >, ., REC N To activate group mode (Group Mode Recording) To record tracks in group mode, you must first turn group mode on before the start of recording. 1 Press GROUP for 2 seconds or more. “ ” and “GP ON” light up and group mode turns on. To cancel group mode Press GROUP for 2 seconds or more again. Recording a track into a new group • Turn group mode on. 1 Press END SEARCH while the recorder is stopped. continued 2 Press N while pressing REC. 3 Play the source sound. To stop recording Press x. The material that was recorded up until x was pressed is entered as a new group. Recording a track into an existing group • Turn group mode on. • Insert a disc with group settings. 1 Press GROUP. “ ” flashes in the display and you can select a group directly (Group Skip Mode) (page 29). 2 Within 5 seconds, press > or . repeatedly until the group you want the track to belong to appears. 3 Press N while pressing REC. 4 Play the source sound. Newly r...
Эта инструкция также подходит к моделям:Плееры - MZ-R410DPC (613.88 kb)