Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
1. VERIFY THAT BASIC REQUIREMENTS ARE MET • Make sure that you have the following: — A wireless (802.11b or 802.11g) or Ethernet network — One or more computers running Windows 98SE, 2000, ME or XP — Broadband Internet service (recommended) • Have your Network Name (SSID) and security settings handy. • Firewalls can interfere with or block MP115 performance. If you are running Windows XP, Service Pack 2, the NETGEAR Wireless Digital Media Player MP115 Resource CD sets it up to be compatible during installation. If you use other firewalls, such as ZoneAlarm, set the following ports to be open: — UDP Ports: 1360, 1900 — TCP Ports: 1025 – 1035, 3640, 3641, 4000, 4001, 7000 – 7010, 49200 – 49210 The Media server online help includes more information about firewalls. 2. INSTALL THE MEDIA SERVER SOFTWARE a. Power on your computer and log in as needed. b. Insert the Resource CD into the CD drive on the computer. The CD main page loads. c. Select Install Media Server software. d. Follow the InstallShield Wizard steps and click Finish when done. Note: Depending on your location, complimentary 30-day trials for Internet radio stations may be available for vTuner, Radio@AOL, and Rhapsody. The Resource CD automatically installs vTuner and Radio@AOL. To use the trial for Rhapsody, you must select Install Rhapsody from the menu, and complete that installation. e. Restart your computer and the NETGEAR Media server software automatically runs. f. Use the Media server software to scan your hard drive to locate your video, picture, and music files. Note: You can use the Options tab on the Media server to specify which types of files you want to include, as described in the Media server online help. 3. INSTALL THE MP115 PLAYER a. Determine which type of cable your television uses: • Composite Video cable and Audio cable (also called RCA Video and RCA Audio): These two cables are included, and are compatible with most televisions in the US. • SCART: This cable is often used in Europe and Australia, and is not included in the package. However, if you have this cable, the MP115 will recognize it, and you can continue to use these instructions. • S-Video, or Component Video: These cables are not included in the package, and you will need to change the MP115 settings in order to use them. See the User Manual on the Resource CD for installation instructions. b. Connect the MP115 to your television with the correct cables. Television MP115, rear panel Composite Video cable Audio cable R L SCART cable (not included) • Composite Video and Audio Cables: — Connect the Composite Video cable, which has only one jack, to the port labelled Composite Video on the rear panel of the MP115. — Connect the red and white jacks on the Audio cable into the corresponding ports labelled Audio on the rear panel of the MP115. — Connect the Composite Video cable and the Audio cable to the corresponding ports on your television. • SCART (cable not included): Connect one end of your cable to the port labelled SCART on the rear panel of the MP115. Then connect the other end to your television set. c. If you have a wired LAN network (not wireless), use an Ethernet cable such as the one provided in the package to connect the MP115 to your router. d. Install the two AA batteries that shipped with the product in the remote control. 4. SELECT THE NETWORK AND SERVER FOR THE MP115 a. Make sure that the MP115 Media server software is running on your computer. b. Turn on the television. c. Connect the MP115 power cord and plug it into an outlet. The LED on the front of the MP115 lights up to show that it is powered on. The logo on the upper right corner of the MP115 shows where to aim the remote control. Note: The MP115 includes an internal power supply and universal power adapter. If the power cord that is provided does not fit your power outlet, simply use a different power cord. .............................. ...................... .................. .......... ................ .............................................. .................................. ................................................ .................................................... .................. ........................................ ............ The MP115 automatically performs the following tasks: • Checking Hardware • Finding Network • Getting IP Address • Finding Server • Accessing Media d. If your network is wireless and/or uses security settings, the MP115 stops at Finding Network, and goes to the Settings, Available Networks screen. • The MP115 is set from the factory to get its IP Address from a DHCP server. If your network does not use DHCP, you must set up the MP115 with a Static IP address in the range of addresses on your network. • If the MP115 is set to use DHCP and fails to obtain an IP Address from the server, it will resort to an autoIP address in the range of 169.254.x.x. You can use a Fixed IP if there is a problem connecting the MP115 to the server. e. Use the...