Оценок - 2, средний балл: 4.5
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
(play/pause/confirm) button ./. buttons ./. buttons .Headphone jack .WM-PORT jack Connect the USB cable (supplied), or peripheral devices (not supplied). .Display .VOL +*1/– button .OPTION/PWR OFF button Press to display the option menu. If you press and hold the OPTION/PWR OFF button, the screen turns off and your “WALKMAN” enters standby mode. .HOLD switch .Strap hole .Microphone Use to make voice recordings. .RESET button Use a small pin, etc. *1 There are tactile dots. Use them to help with button operations. Troubleshooting If your “WALKMAN” does not function as expected, try the following steps to resolve the issue. 1 Find the symptoms of the issue in “Troubleshooting” in the User Guide (HTML document), and try any corrective actions listed. For details on connecting to a computer, see the tables on the right. 2 Connect your “WALKMAN” to your computer to charge the battery. You may be able to resolve some issues by charging the battery. 3 Press the RESET button with a RESET button small pin, etc. Before resetting your “WALKMAN,” check that no song, video, etc. is being played back. You can then reset your “WALKMAN” safely. 4 Check information on the issue in the Help of each software. 5 Look up information on the issue on one of the customer support Web sites. About the customer support Web sites, see “For the latest information”. 6 If the approaches listed above fail to resolve the issue, consult your nearest Sony dealer. To initialize (format) your “WALKMAN” You can format the built-in flash memory of your “WALKMAN.” If the memory is formatted, all files including the User Guide (HTML document) will be erased and all setting values returned to their defaults. Be sure to verify the files stored in memory prior to formatting, and then export any necessary files to the hard disk of your computer or other device beforehand. 1 Press and hold the BACK/HOME button until the Home menu appears. 2 Select [Settings] – [Common Settings] – [Reset/ Format] – [Format] – [Yes] – [Yes] in this order. Press the ./././. button to select the item, and then press the . button to confirm. When initialization finishes, [Memory formatted.] appears. Note .Do not format the built-in flash memory using Windows Explorer. If you format the built-in flash memory, format it on your “WALKMAN.” Precautions About the headphones .Avoid playing the unit at so loud a volume that extended play might affect your hearing. .At a high volume outside sounds may become inaudible. Avoid listening to the unit in situations where hearing must not be impaired, for example, while driving or cycling. License and Trademark Notice Refer to the User Guide (HTML document). Do not expose the batteries (battery pack or batteries installed) to excessive heat such as sunshine, fire or the like for a long time. Rated current consumption 500 mA For users in France When replacing the headphones/earphones, please refer to the model of the headphones/ earphones adapted to your unit that appears below...
Эта инструкция также подходит к моделям:Плееры - NWZ-E463 (553.04 kb)
Плееры - NWZ-E463K (553.04 kb)
Плееры - NWZ-E463HK (553.04 kb)
Плееры - NWZ-E464 (553.04 kb)