Оценок - , средний балл:
(
)
)
Производитель: Sony
Размер: 853.74 kb
Название файла: 4129781141.pdf
Язык инструкции:
Документ загружается, подождите пожалуйста
 |
Документ загружается, подождите пожалуйста
К этому устройству также есть другие инструкции:
Фрагмент инструкции
(backward) or . (forward). Shuffle playback Slide the SHUFFLE switch in the direction of the arrow to play back songs in random order. To stop playback Press the jog dial until it clicks. ©2009 Sony Corporation Printed in Malaysia 4-129-781-14(1) What is ZAPPIN Playback? ZAPPIN enables sequential playback of song clips at a preset duration. Normal playback Changes to ZAPPIN. ZAPPIN playback Short recognizable clips of songs (such as the most melodic or rhythmical section) The ZAPPIN playback time for song clips can be set to either “Short” or “Long.” Normal playback Returns to normal playback and restarts playback of the current song from the beginning. . See “3 Playing Music” for details on operations. Checking Supplied Accessories . This player (1) . Stand with USB cable (1) . Earbuds (Size S, L) (Supplied in pairs) . Holder (1) . Operation Guide (this manual) (1) How to install the earbuds At purchase, M size earbuds are installed (L and S sizes are also supplied). To enjoy better sound quality, change the size of the earbuds or adjust the earbud position to fit in your ears comfortably and snugly. When you change the earbuds, twist while installing them firmly on the player to prevent the earbud from detaching and remaining in your ear. If an earbud becomes damaged, optional earbuds (EP-EX1) are available for purchase. How to store the player into the holder To protect the player and prevent magnetic leakage, store the player in the supplied holder whenever carrying or when not using the player. Press the player into the holder until it clicks. The magnet is on the left side. Do not place credit cards or ATM cards, etc. (magnetic coded cards) near the player when it is not stored in the holder to prevent damage to the magnetic coding on the cards. Parts and Controls Neckband OPR (Operation) lamp SHUFFLE switch Jog dial VOL+/- button Status lamp USB jack RESET button How to place the player on your ears . Check the left (L) and right (R) parts of the player. . Separate the left and right parts. These parts are magnetically coupled. . Hang the neckband over the back of your neck and ears, and place the earbuds into your ears. 1 Preparing the Player Charging the player Upon purchase, first, charge the player. . Connect the player to the supplied stand. . Connect the USB cable of the stand to a running computer. When you use the player for the first time, or if you have not used the player for a long time, the player may take some minutes to start charging or to be recognized by the computer. If a screen appears presenting a choice of actions, click “Cancel.” to the USB connector Status lamp Charging starts. The status lamp blinks slowly during charging. When charging is completed, the status lamp will stop blinking and light dimly while the player is connected to the computer. For details about charging time and the battery duration, see . “Specifications” on the reverse side. Checking the remaining battery power Remaining battery power is indicated in the OPR lamp. When the OPR lamp changes to red, recharge the battery. Green* Red* Quick red blinking When the battery is used up, the OPR lamp blinks red quickly and a long beep is heard. You * Blinks at about 5 second intervals. cannot operate the player. 2 Importing and Transferring Music You can transfer songs to the player using Windows Media Player 11 on your computer. . Import songs from CDs, etc., to Windows Media Player 11 on the computer. For details on how to import songs from CDs, etc., refer to the Help of Windows Media Player 11. You do not need to re-import songs that have previously been imported to Windows Media Player 11. 1 Click “Rip.” 2 Click here to start importing. . Connect the player to the computer by using the stand. . Transfer songs from Windows Media Player 11 to the player. The status lamp blinks brightly while transferring songs to the player. 1 Choose albums, etc. 2 Click here to transfer to the player. . Hints . See also . “Hints about transferring music” and “Notes about transferring music” on the reverse side. . You can also transfer songs other than by using Windows Media Player 11. For details, see . “Using Content Transfer” on the reverse side. 3 Playing Music . Hints . After you press the jog dial, the OPR lamp blinks green and red alternately and the beep is heard repeatedly until the playback starts. Please wait until the OPR lamp blinking and the beep stop. . See also . “Hints about playing music” on the reverse side. ZAPPIN playback The player plays back song clips for about 4 seconds each. . If the most recognizable passage of the song cannot be found, the song is played back from about the 45 second point from the beginning. If the length of the song is under about 45 seconds, the song is played back from some point before the end of the song. Skipping to the previous/next song, or shuffle playback during ZAPPIN playback You can move to the previous/next song, or play back songs in random order. The method of operat...
Эта инструкция также подходит к моделям:- ()