Оценок - 3, средний балл: 4.3
(
)
)
|
Фото и характеристики Sony ZS-PS20CP |
Фрагмент инструкции
* When playing a VBR MP3 file, the unit may resume playback from a different point. Tips . Playback starts from the MP3/WMA file you last stopped playing (Resume play). During stop, the MP3/WMA file number and the playing time to be played are displayed. . To cancel resume play (to start play from the beginning of the first MP3/WMA file), press . .. Note Always hold down . . and make sure that “NO DEV” appears before removing the USB device. Removing the USB device while “NO DEV” is not displayed may corrupt the data on the USB device or damage the USB device itself. To change the play mode Press MODE . repeatedly while the USB device is not playing. You can select Normal Play (all files on the USB device (or in the selected folder while “ ” lights up) one after another), Shuffle Play (“SHUF” or “ SHUF”), or Program Play (“PGM”). Notes on the USB device . You cannot change the play mode during playback. . Some time may be needed before playback starts when: – the folder structure is complex. – the USB device is close to capacity. . When a USB device is connected, the unit reads all the files on the device. If there are many folders or files on the device, it may take a long time for the unit to finish reading them. . Do not connect a USB device to the unit through a USB hub. . For some USB devices, when an operation is performed on the USB device, there may be a delay before it is carried out on this unit. . This unit may not support all the functions provided on the connected USB device. . The playback order on this unit may differ from the playback order on the connected USB device. . During playback, folders that contain no MP3/WMA files are skipped. . This unit can play MP3 and WMA files that have the “.mp3” or “.wma” file extension. . If there are files on the disc that have the “.mp3” or “.wma” file extension, but are not MP3/WMA files, the unit may produce noise or malfunction. . A maximum of 999 MP3/WMA files and 255 folders can be contained on a single USB device. The maximum number of MP3/WMA files and folders may vary, depending on the file and folder structure. . Compatibility with all MP3/WMA encoding/writing software, recording devices, and recording media cannot be guaranteed. If you use an incompatible USB device, sound skipping or noise may be produced, or the device may not play at all. Connecting optional components You can enjoy the sound from an optional component such as a portable digital music player through the speakers of this unit. Be sure to turn off the power of each component before making any connections. For details, refer to the instruction manual of the component to be connected. 1 Connect the AUDIO IN jack . on the unit to the line output jack of the portable digital music player or other components using an audio connecting cable (not supplied). 2 Turn the unit and the connected component on. 3 Press AUDIO IN . and start playing sound on the connected component. The sound from the connected component is output from the speakers. To connect the unit to a TV or VCR, use an extension cable (not supplied) with a stereo-mini jack on one end and two phono plugs on the other end. Before using the unit About the operating voltage The unit’s operating voltage is shown on the bottom of the unit. For changing the AM tuning interval, radio frequency range, and AC operation, check the operating voltage of your unit. To turn on/off the power Press OPERATE .. To adjust the volume Press VOLUME +, – (VOL +, – on the remote) .. To listen through headphones Connect the headphones to the . (headphones) jack .. To reinforce the bass sound Press MEGA BASS . on the unit. “MEGA BASS” appears in the display. To return to normal sound, press the button again. Playing a CD/MP3/WMA disc 1 Press CD . on the unit. (On the remote, press OPERATE . and then press FUNCTION . repeatedly until “CD” appears in the display.) 2 Press . PUSH OPEN/CLOSE . on the unit, and place a disc with the label side up in the CD compartment. To close the CD compartment, press . PUSH OPEN/ CLOSE . on the unit. 3 Press . .. The unit plays all the tracks/MP3/WMA files once. When you place MP3/WMA discs, “MP3” or “WMA” appears in the display after the unit reads the file information. Audio CD Track number Playing time MP3/WMA disc (Example: When you place MP3 disc) File number After the file name is displayed, the playing time will appear To Press Pause playback . .. To resume play, press it again. Stop playback . .. Go to the next track/MP3/WMA file . .. Go back to the previous track/ MP3/WMA file . .. Select a folder on an MP3/WMA disc + on the unit to go forward and – to go backward .. Locate a point while listening to the sound . (forward) or . (backward) . on the unit while playing and hold it until you find the point. Locate a point while observing the display . (forward) or . (backward) . on the unit in pause and hold it until you find the point. Remove the CD . PUSH OPEN/CLOSE .. * VOLUME + (VOL + on the remote) . and ....