Оценок - 1, средний балл: 3
(
)
)
|
К этому устройству также есть другие инструкции:
Плееры - MZ-N505 (1.66 mb)
Плееры - MZ-N505 (3.44 mb)
Фрагмент инструкции
The track or disc is labeled. To cancel labeling, Press CANCEL (T MARK) in step 6. Notes • When the recording is stopped while labeling a track, a group, or a disc during recording, or when the recording moves on to the next track while labeling a track, the input at that point is entered automatically. • “LP:” is automatically added at the beginning of the track name for tracks recorded in MDLP mode (page 26). • You cannot label or relabel the premastered disc or blank disc. Relabeling recordings 1 Insert a disc and do the following operations: To relabel a track Start playing a track you want to relabel, and change a track name during playback operation. To relabel a group Turn group mode on (page 28) and start playing or recording a track within the group you want to relabel, and change the group name while playing or recording operations. To relabel a disc If the disc is already recorded, follow the procedures from step 2 while the recorder is stopped. If you relabel a disc with group settings, turn group mode on (page 28). 2 Follow steps 2 to 4 of “Labeling recordings” (page 39) to display a track, group, or disc name. 3 Follow steps 5 to 7 of “Labeling recordings” (page 39), and then keep pressing ENTER (ENTER) for 2 seconds or more. Notes • You cannot relabel premastered MDs. • The recorder is able to display, but cannot label using Japanese “Katakana” characters. • The recorder cannot rewrite a disc or track name of more than 200 letters that was created by another device. To cancel labeling Press CANCEL (T MARK). Registering tracks or groups as a new group (Group Setting) Do the following procedure to register tracks or groups as a new group. The tracks or groups must, however, be sequential. If the desired tracks or groups are not consecutive, you must move them to make them consecutive before you can register them (“Moving recorded tracks”, page 42). The operation of this function depends on whether group mode is on or off. • When group mode is ON: Several groups are registered as one group. • When group mode is OFF: Several tracks are registered as one group. The following section explains the operation when group mode is on. Group Group 123456 7 89 Making a new Making a new group group with with 2 groups. tracks 1 to 3. 123456789 Group Group • Registration of non-consecutive tracks is not possible (for example, track 3 cannot be registered into a group with track 5 to 7). • Tracks always appear according to their order on the disc, not their order within the group (even when group mode is on) • This function can be operated on the recorder only. • Insert a disc. ./>./> MENU/ENTER GROUP 1 While the recorder is stopped, press MENU. 2 Press . or > repeatedly until “EDIT” flashes in the display, and then press ENTER. 3 Press . or > repeatedly until “G:Set” flashes in the display, and then press ENTER. The track number of the first track (“STR”) appears in the display. 4 Press . or > repeatedly until the number or name of the desired first track flashes in the display, and then press ENTER. This selects the first track of the new group. Even when group mode is on, track numbers appear according to their order on the disc, not their order within the group. 5 Press . or > repeatedly until the number or name of the desired last track flashes in the display, and then press ENTER. The track number of the last track in the group (“END”) appears in the display. This selects the last track of the new group. 6 Follow steps 3 to 7 of “Labeling recordings” (page 39) to label a group. Notes • In step 4, the first track must either be the first track of an existing group or a track that does not belong to a group. • When selecting the last track in step 5, make sure the track comes after the one selected in step 4. The last track must either be the last track of an existing group or a track that does not belong to a group. To release a group setting • Insert a disc with group settings. ./>/x GROUP MENU/ ENTER 1 Press GROUP for 2 seconds or more to turn on group mode. 2 Select a group that you want to release and check the contents (see “Selecting and playing groups (Group Skip Mode)” (page 33)). 3 Press x. continued 4 Press MENU. 5 Press . or > repeatedly until “EDIT” flashes in the display, and then press ENTER. 6 Press . or > repeatedly until “G:Rls” flashes in the display, and press ENTER. “G:Rls?” and “ENTER” appear in the display. 7 Press ENTER. The group setting of the selected group is released. Moving recorded tracks You can change the order of the recorded tracks. Example Move track C from the third to the second track. Before moving A C DB A B DC After moving MENU/ENTER CANCEL ./> EDIT ENTER T MARK >/. 1 While playing the track you want to move, press MENU (EDIT for 2 seconds or more). 2 Press . or > (flip the lever towards > or .) repeatedly until “EDIT” flashes in the display, and then press ENTER (ENTER) again. “ ” and “T:Name” flashes in the display and the recorder plays the selected track repeate...