Оценок - 2, средний балл: 4.5
(
)
)
|
Фото и характеристики Sony NW-E55 |
К этому устройству также есть другие инструкции:
Фрагмент инструкции
Advanced OperationsGro pM de ode Shuttle switch Press (Confirm) Nx button REPEAT/SOUND button to (+/>) to (./–) 1 Select the A-B Repeat mode (A-B Rep) (page 14). 2 Press the Nx button to start playback. 3 Press the REPEAT/SOUND button to set the start point (A) while playing back. “B” blinks. A B01 00:00 4 Press the REPEAT/SOUND button to set the end point (B). “A B” is displayed and the specified section is played back repeatedly. AB01 00:55 Notes • You cannot set A-B Repeat for a section that overlaps two or more tracks. • If you do not set the end point (B), the end point is automatically set at the end of the track. • You cannot use A-B Repeat in the Group mode or when the current time is displayed. continued Repeat mode(continued) z Tips • You can fast-forward or fast-rewind by rotating the Shuttle switch, after the start point (A) is set. If the track reaches the end while fast-forwarding, the end point is set as point (B) and fast-forwarding continues. A-B Repeat starts when you release the Shuttle switch. If the track reaches the beginning while fast-rewinding, it jumps to the end of the track, the end point is set as point (B), and fast-rewinding continues. • You can fast-forward or fast-rewind by rotating the Shuttle switch, during A-B Repeat playback. If the track reaches the track start/end while fast-forwarding or fast-rewinding, playback is stopped (enters Standby). A-B Repeat restarts when you release the Shuttle switch. To clear the start point (A) and end point (B) • Press the REPEAT/SOUND button during A-B Repeat playback. • Press the MENU button during A-B Repeat playback. • Select the Group mode by pressing the GROUP button during A-B Repeat playback. • Select the previous or next track by rotating the Shuttle switch during A-B Repeat playback. (The A-B Repeat mode is not cancelled.) To cancel the A-B Repeat mode Change the Repeat mode in the menu screen (page 14). Playing specified sentences repeatedly (Sentence Repeat) This function automatically detects only voice data from the setting point and repeats the voice data for setting counts. It is useful for learning a foreign language. z Tip The default repeat counts setting is 2 times for one sentence. But you can change the repeat counts setting. Refer to “Setting the repeat counts” on page 17. 1 Select the Sentence Repeat mode (SENTENCE Rep) (page 14). 2 Press the Nx button to start playback. 3 Press the REPEAT/SOUND button to place the setting point during playback. The Network Walkman detects spoken sections and non-spoken sections from the set point, and Sentence Repeat starts. (The spoken section is repeated once (during detection), and the setting is counted.) 01 00:12 Notes • You cannot use Sentence Repeat in the Group mode, or when the current time is displayed. •A spoken or non-spoken section of less than 1 second will not be detected. • If a non-spoken section is not detected until the track end, the track end point is recognized as a non-spoken section and Sentence Repeat begins from the previous spoken section. To clear the setting point • Press the REPEAT/SOUND button during Sentence Repeat playback. • Press the MENU button during Sentence Repeat playback. • Select the Group mode by pressing the GROUP button during Sentence Repeat playback. • Select the previous or next track by rotating the Shuttle switch during Sentence Repeat playback. (The Sentence Repeat mode is not cancelled.) To cancel the Sentence Repeat mode Change the Repeat mode in the menu screen (page 14). Gro pM de ode Shuttle switch Press (Confirm) Nx button to (+/>) to (./–) REPEAT/SOUND button Setting the repeat counts You can set the repeat counts (1-9) of one sentence for the Sentence Repeat mode. Gro pM de ode Shuttle switch Press (Confirm) Nx button MENU button to (+/>) to (./–) 1 Press the MENU button. The menu screen is displayed. REPEAT MODE> 2 Rotate the Shuttle switch to select “REPEAT MODE >” and press the Nx button to confirm. 3 Rotate the Shuttle switch to select “SENTENCE Rep” and press the Nx button to confirm. “COUNT:” is displayed on the screen. COUNT:2 4 Rotate the Shuttle switch to select a desired repeat counts and press the Nx button to confirm. 5 Press the MENU button. The display returns to the normal screen. To cancel the Menu mode Select [RETURN] in the menu screen or press the MENU button. Changing the display mode You can view information such as track numbers or titles in the display while music is played or stopped. Change the display mode by operating the Shuttle switch in the Menu mode. • Lap Time: Elapsed time display mode The following will be displayed after a music title and artist name are displayed. Track number Elapsed time 00901:36 Play status* * Play: Displays and alternately. Stop: Displays . Search track: Displays > or .. Fast-forward/Fast-rewind: Displays M or m. • Title: Title display mode When the music title includes more than 12 characters, the title will be automatically scrolled. Title/Artis • Track info: Tra...
Эта инструкция также подходит к моделям:Плееры - NW-E75 (528.36 kb)