Оценок - 4, средний балл: 4.5
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
Notes • Make sure not to operate the recorder while changing the rechargeable battery even if the recorder is connected to AC power adaptor. The operation may stop. • “Charging” and e may not appear in the display immediately after you connect the AC power adaptor and press x • CANCEL/CHG. The indication will, however, begin flashing after a few minutes and charging will begin. • Because of the battery’s characteristics, the capacity of the rechargeable battery may be smaller than normal when it is used for the first time or after a long period of disuse. In this case, charge and discharge the battery several times. The normal battery life will be restored. • Charge the rechargeable battery at a temperature of +5°C (+41°F) to +35°C (+95°F). The charging time may vary according to the surrounding temperature. • It is preferable to use the recorder on house current when recording or editing. When powering the recorder with a battery, make sure to use a fully charged rechargeable battery or a new dry battery. When to charge the rechargeable battery or replace the dry battery You can check the battery condition on the display window of the recorder. Battery power decreasing m Weak battery m The battery is drained. “LOW BATTERY” flashes in the display, and the power goes off. The battery level indicator is approximate. It may be more or less than the indication depending on the operating condition or the operating environment. Battery life When recording continuously Hi-MD mode (When using a 1GB Hi- MD disc) (Unit: approx.hours)(JEITA1)) Batteries Linear PCM Hi-SP Hi-LP NH-7WMAA 2) 3 4.5 5 LR63) 2.5 3.5 4.5 1) Measured in accordance with the JEITA (Japan Electronics and Information Technology Industries Association) standard. 2) When using a 100% fully charged nickel metal hydride rechargeable battery 3) When using a Sony LR6 (size AA) “STAMINA” alkaline dry battery (produced in Japan) Hi-MD mode (When using a 60/74/80minute standard disc) (Unit: approx.hours)(JEITA) Batteries Linear PCM Hi-SP Hi-LP NH-7WMAA 2.5 4.5 5.5 LR6 5 8 9.5 MD mode (Unit: approx.hours)(JEITA) Batteries SP LP2 LP4 Stereo Stereo Stereo NH-7WMAA 4.5 6 6.5 LR6 7.5 9.5 11 When playing continuously Hi-MD mode (When using a 1GB Hi- MD disc) (Unit: approx.hours)(JEITA) Batteries Linear PCM Hi-SP Hi-LP NH-7WMAA 4.5 7.5 9 LR6 11 18.5 21.5 Hi-MD mode (When using a 60/74/80minute standard disc) (Unit: approx.hours)(JEITA) Batteries Linear PCM Hi-SP Hi-LP NH-7WMAA 4 7.5 9 LR6 9.5 17 20 MD mode (Unit: approx.hours)(JEITA) Batteries SP LP2 LP4 Stereo Stereo Stereo NH-7WMAA 7.5 9 10 LR6 20.5 24 26 Notes • Stop the recorder before replacing the battery. • When using a 1GB Hi-MD disc, the continuous recording time may be shortened if you repeatedly make short recordings. Recording a disc right away! This section explains the basic procedure for making digital recordings using an optical cable connected to a CD player, Digital TV or other digital equipment. Make sure to use the optical cable. 1 Make connections. (Insert the cables firmly and completely into the appropriate jacks.) 1 Connect the AC power adaptor to the 2 Connect the optical cable to the recorder and a house current. recorder and an external component. CD player, MD player, To a wall DVD video player, etc. outlet Optical mini- plug . See “Optional accessories” To DC IN 3V To LINE IN (OPT) Optical plug AC poweradaptor To a digital (optical) out jack (page 67). Optical cable* Note Make sure to disconnect the dedicated USB cable before recording. 2 Insert a recordable disc. 1 Slide OPEN to open the lid. 2 Insert a disc with the label side facing front, and press the lid down to close. Make sure to check the record-protecttab is closed. 3 Confirm the operation mode. This recorder has two operation modes, “Hi-MD mode” and “MD mode”. The operation mode is automatically recognized whenever the disc is inserted. After you insert a disc, check the operation mode on the display window of the recorder. “Hi-MD” lights up when the operation mode is Hi-MD and “MD” lights up when the operation mode is MD. • When using a 1GB Hi-MD disc, the operation mode will only be Hi-MD. • When using a standard disc (60/74/80 minutes), the operation mode can be set as follows. Disc condition Operation mode Blank disc The mode set for “Disc Mode” in the menu.1) The “Disc Mode” is factory set to “Hi-MD”. If you want to use the disc on another component that does not support Hi-MD, set the “Disc Mode” to “MD” to use the disc in MD mode. The disc contains material recorded in Hi-MD mode Hi-MD The disc contains material recorded in MD mode MD 1) Refer to “Selecting the disc mode (Disc Mode)” (page 58) for the “Disc Mode” setting. continued 4 Record a disc. 1 Select and pause the sound source to 2 Make sure that disc indication has be recorded. stopped rotating in the display window PAUSE Connected component 3 While the recorder is stopped, press and hold T MARK/REC and press NENT on the recorder. “REC” lights up and recordin...