Оценок - 2, средний балл: 5
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
Note If all tracks are moved out of the group, the group automatically disappears from the disc. Erasing tracks and the entire disc (Erase) You can erase unnecessary tracks or all tracks on a disc. When erasing tracks that have been transferred from the computer If you erased tracks that have been transferred from the computer, the transfer authorization of the tracks will be as follows. • If the tracks were transferred in Hi-MD mode, the transfer authorization of the tracks are restored automatically when you insert the disc into the recorder and then connect the recorder to the computer. • If the tracks were transferred in MD mode, the transfer authorization of the tracks is lost. If you do not want to lose the transfer authorization, restore the authorization by transferring the tracks to the computer again before erasing them. Note You cannot erase non-audio data (for example, text data or image data) on a disc used in Hi- MD mode. 5-way control key (NENT) Jog dial x NAVI/MENU To erase a track Note that once a recording has been erased, you cannot retrieve it. Make sure of the track you are erasing. 1 While playing the track you want to erase, enter the menu and select “Edit” - “Erase” - “ : Erase”. “Erase OK?” and “PUSH YES:ENTER NO:CANCEL” appear in the display. If the selected track was transferred from the computer, “TrkFromPC ERASE OK?” appears in the display. 2 Press NENT to erase the track. The track is erased and the next track starts to play. All the tracks after the one erased are automatically renumbered. Note If all tracks in a group are erased, the group is automatically deleted from the disc. To erase a part of a track Add track marks at the beginning and the end of the part you want to erase, then erase the part (page 49). To erase a group You can erase tracks in a selected group. Note that once a recording has been erased, you cannot retrieve it. Be sure to check the contents of the group before you erase it. 1 Select a group you want to erase and check the contents (see page 35). 2 Press x. continued 3 Enter the menu and select “Edit” “ Erase” -“ : Erase”. “Group Erase OK?” and “PUSH YES:ENTER NO:CANCEL” appear in the display. If the selected group contains tracks that have been transferred from the computer, “TrkFromPC ERASE OK?” appears in the display. 4 Press NENT to erase the group. The group is erased. To erase the whole disc You can quickly erase all the tracks and data of the disc at the same time. Note that once a recording has been erased, you cannot retrieve it. Be sure to check the contents of the disc before you erase it. In case of a Hi-MD disc or standard disc in Hi-MD mode, only audio data is erased. Other data such as text or image data will not be erased. 1 Play the disc you want to erase to check the contents. 2 Press x. 3 Enter the menu and select “Edit” “Erase” - “AllErase”. “ALL TRACK Erase OK?” and “PUSH YES:ENTER NO:CANCEL” appear in the display. If the disc contains tracks that have been transferred from the computer, “TrkFromPC ERASE OK?” appears in the display. 4 Press NENT to erase the whole disc. “SYSTEM FILE WRITING” appears in the display, and all the tracks will be erased. When erasing completes, “NO TRACK” appears in the display in Hi-MD mode and “BLANKDISC” and “00:00” appear in MD mode. Dividing a track (Divide) You can divide a track with a track mark, creating a new track from the part following the track mark. The track numbers will increase as follows. Notes • You cannot add a track mark on a track that has been transferred from your computer. • You cannot divide a track that has been recorded in Hi-MD mode using the MD Simple Burner software. • The Bookmark setting will be erased if you carry out the Divide function. • You cannot divide a track at its beginning or end. • You cannot divide a track if after the division causes the total number of tracks on the disc to exceed the maximum allowed (2,047 tracks for a disc used in Hi-MD mode or 254 tracks for a standard disc). 1 3 42 Track marking 2 31 4 5 Track numbers increase. T MARK Dividing a track directly While playing or pausing, press T MARK on the recorder at the point you want to mark. “MARK ON” appears in the display, and a track mark is added. The track number will increase by one. To add track marks while recording (except while synchro-recording) Press T MARK at the point you want to add a track mark. You can use Time Mark to add track marks automatically at specified intervals (except while digital recording) (page 29). Combining tracks (Combine) When you record with analog (line) input, unnecessary track marks may be recorded where recording level is low. You can erase a track mark to combine the tracks before and after the track mark. The track numbers will change as follows. Notes • You cannot erase a track mark on a track that has been transferred from your computer. • You cannot erase a track mark on a track that has been recorded in Hi-MD mode using the MD Simple Burner software. • ...