Оценок - 3, средний балл: 4.3
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
When you use the player for the first time, or if you have not used the player for a long time, recharge it fully, and then transfer the data to the player. For information on recharging time, see the Specification of the Operation Guide (PDF file). 14 For details, refer to SonicStage Help 1 2 3 4 5 Double-click the icon on the desktop. SonicStage starts up. Connect the player to your computer with the supplied USB cable. Place the pointer over [Transfer] and select [ATRAC Audio Device] from the transfer destination list. Select an audio file(s) or album you want to transfer. Click to start transferring. To stop transferring, click | m \. • Do not disconnect the USB cable while data is being transferred. • Do not leave the player connected for extended periods to a laptop computer that is not connected to AC power, because the player may discharge the computers battery. • You can create and transfer playlists that group your favorite songs into a list. Select the playlist in the SonicStage display mode to transfer playlists. • To delete songs on the player, transfer songs back to SonicStage or delete them in SonicStage. 15 4 Playing Music Basic Operation - Parts and Controls \T\ WM-PORT Connect to the supplied USB cable, accessories for WM-PORT such as optional accessories for recording with the player, or peripheral device. [2~1 Display See page 19. [31 button Starts song playback. When starting playback, appears in the display, and if the button is pressed again, H appears and playback stops. There is no power button on the player. When you stop song playback or FM reception (NW-S703F/S705F/S706F only) by pressing the button, after about a few seconds, the display goes off automatically and the player enters Sleep status. The player consumes very little battery power. [41 VOL +*/- button Adjusts the volume. [5] DISPLAY/HOME button When you press this button while the player is in play or stop mode, you can change the display. For details, see the Operation Guide (PDF file). Press and hold this button to display the HOME screen (CiF page 20). fSl Shuttle switch By rotating the shuttle switch, you can select a menu item, skip to the beginning of the song, or fast- forward/fast-rewind. You can also set to the FOLDER mode or normal mode by sliding the shuttle switch. * There are tactile dots. Use them to help with button operation. 16 To operate the player with the shuttle switch Normal mode To | Operation In play mode Skip to the beginning of the next song. Rotate the shuttle switch to briefly. Skip to the beginning of the current song. Rotate the shuttle switch to HM briefly. Fast-forwards the current song. Rotate the shuttle switch to and release it at the desired point. Fast-rewinds the current song. Rotate the shuttle switch to and release it at the desired point. In stop mode Select the beginning of the next song, and if held longer, continues to skip through the next song(s). Rotate and hold the shuttle switch to ►». Select the beginning of the current song, and if held longer, continues to skip through the previous song(s). Rotate and hold the shuttle switch to . FOLDER mode To | Operation In play mode/ In stop mode Skip to the first song in the next sort category set by the song order. Rotate the shuttle switch to briefly Skip to the first song in the current sort category set by the song order. Rotate the shuttle switch to briefly Select the first song in the next sort category, and if held longer, continues to skip through the next sort category set by the song order. Rotate and hold the shuttle switch to ►». Select the first song in the current sort category, and if held longer, continues to skip through the previous sort category set by the song order. Rotate and hold the shuttle switch to . For details on song order, see the Operation Guide (PDF file). 17 Playing Music (continued) l~7l HOLD switch You can protect the player against accidental operation by using the HOLD switch when carrying it. By sliding the HOLD switch to the HOLD position, all operation buttons are disabled. If you press buttons or rotate the shuttle switch while the HOLD function is activated, “HOLD” appears in the display. If you slide the HOLD switch to the opposite position, the HOLD function is released. I~8~l Strap hole This is used to attach a strap (sold separately). [9] RESET button Resets the player by pressing the RESET button with a small pin, etc. For details, see Ig the Operation Guide (PDF file). HO] PLAY MODE/SOUND button Switches the play mode. Press and hold this button to change the sound quality setting. PTT| Headphone jack For connecting the headphones. Connect until it clicks into place. If connecting the headphones improperly, it may not sound right. If the supplied headphone cord is too short, use the supplied headphone extension cord between the headphones and the player. For NW-S703F/S705F/S706F users Connect the headphon...
Эта инструкция также подходит к моделям:Плееры - NW-S603 (424.13 kb)
Плееры - NW-S703F (424.13 kb)
Плееры - NW-S705F (424.13 kb)
Плееры - NW-S706F (424.13 kb)