Оценок - , средний балл:
(
)
)
Производитель: Philips
Размер: 5.41 mb
Название файла:
Язык инструкции:
Документ загружается, подождите пожалуйста
 |
Документ загружается, подождите пожалуйста
Фрагмент инструкции
Press and hold to switch the Electronic Shock Protection (ESP) on/off. 4 MODE .................selects the different playing possibilities: To return to normal playback : The current track is played repeatedly : The entire CD is played repeatedly. SCAN : The first 10 seconds of each of the remaining tracks are played in sequence : All tracks of the CD are played in random order until all of them have been played once 5 p/LINE OUT........3.5 mm headphone socket (headphone AY3806) 6 ............................LCD display 7 MP3 3 4..........MP3 only: skips forward/backward albums 8 2;.......................switches the player on, starts or pauses CD play 9 9.........................stops CD play, switches the player off 0 J(........................skips and searches CD tracks backwards ! )K........................skips and searches CD tracks forwards @ 4.5V/450mA DC..socket for external power supply “AY3162 (not included)” This product complies with the radio interference requirements of the European Union. CONTROLS ( see figure 1) CONTROLS / POWER SUPPLY/TROUBLESHOOTING 1 Track number 2 Electronic Skip Protection (45 sec) 3 Base enhancement 4 Battery empty 5 MP3 indicator 6 Repeat 1 track / Repeat all track 7 Scan tracks 8 Shuffle all track 9 MP3 album number (Display album # when pressing MP3 3/4) 0 Playing time You can use the following batteries with this CD-player: • normal batteries type LR6, UM3 or AA (preferably Philips), or • alkaline batteries type LR6, UM3 or AA (preferably Philips). CAUTION – Batteries contain chemical substances, so they should be disposed of properly. – Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. – Incorrect use of batteries can cause electrolyte leakage and will corrode the compartment or cause the batteries to burst. – Old and new or different types of batteries should not be combined. – Remove the batteries if the set is not to be used for a long time. CD PLAY / GENERAL INFORMATION • When playing a CD-Rewritable (CD-RW), please note that it takes 3–15 seconds after pressing 2; for sound reproduction to start. • Playback will stop if you open the CD lid. • While the CD is read, Read flashes in the display. • Do not touch the lens Aof the CD player. • Do not expose the unit, batteries or CDs to humidity, rain, sand or excessive heat (caused by heating equipment or direct sunlight). • You can clean the CD player with a soft, slightly dampened, lint-free cloth. Do not use any cleaning agents as they may have a corrosive effect. • To clean the CD, wipe it in a straight line from the center toward the edge using a soft, lint-free cloth. A cleaning agent may damage the disc! Never write on a CD or attach a sticker to it. • The lens may cloud over when the unit is moved suddenly from cold to warm surroundings. Playing a CD is not possible then. Leave the CD player in a warm environment until the moisture has evaporated. • Active mobile phones in the vicinity of the CD player may cause malfunctions. • Avoid dropping the unit as this may cause damage. Playback information Batteries (not included) LCD display ( see figure 2) CD player and CD handling WARNING: Under no circumstances should you try to repair the set yourself as this will invalidate the warranty. If a fault occurs, first check the points listed, before taking the unit for repair. If you are unable to solve a problem by following these hints, consult your dealer or service center. The CD player has no power, or playback does not start • Check that your batteries are not dead or empty, that they are inserted correctly, that the contact pins are clean. • Your adapter connection may be loose. Connect it securely. • For in-car use, check that the car ignition is on. Also check player‘s batteries. The indication Err is displayed • Check that the CD is clean and correctly inserted (label-side upward). • If your lens has steamed up, wait a few minutes for this to clear. Music files do not play • Check that the file names of MP3 files end with .mp3. Some directories missing on MP3 CDs • Check that the total number of files and albums on your MP3 CDs does not exceed 999. • Only albums with MP3 files are shown. The CD skips tracks • The CD is damaged or dirty. Replace or clean the CD. • SHUFFLE is active. Switch off whichever is on. Music skips or popping sounds when you play a MP3 track • Play the music file in your computer. If the problem remains, encode the audio track again and make a new CD. No sound or bad sound quality. • CD-RW (CD-R) was not recorded properly. Use FINALIZE on your CD-recorder. • PAUSE might be active. Press 2;. • Loose, wrong or dirty connections. Check and clean connections. • Volume might not be appropriately adjusted. Adjust the volume. • Strong magnetic fields. Check player’s position and connections. Also keep away from active mobile phones. • For in-car use, check that the cassette adapter is inserted correctly, that the car cassette player’s p...