Оценок - 3, средний балл: 4.3
(
)
)
|
Фрагмент инструкции
While tracks/sections are repeated, only the Stop and A-B buttons work. Setting the Modes Each time the EQ/REP button of your remote controller is pressed and held, the modes will change in the order of REP, ALL, SHU and INT. REP mode : Repeats current track. ALL mode : Repeats all the tracks. SHU mode : Enables random playback. INT mode : Enables you to repeat the first 10 seconds of the tracks saved (for 10 seconds each). Using the Equalizer Each time the EQ/REP button of your remote controller is pressed, the equalizer modes will be changed in the order of Classic, Jazz, Rock and Normal. Normal mode is not indicated on the panel. Using the 3D Sound Press the 3D buttonto add Surround 3D sound effect to four different modes (Normal, Classic, Jazz, Rock). The surround 3D sound is available only in the MP3 mode. 5 English Voice Recording Recording the voice messages 1 Press the MODE button on the main unit to switch into the voice mode. - Voice mode can only be activated in the stop mode. 2 Press the REC button and the voice messages will be recorded through the microphone. - Press the Stop button ( ) to stop recording. If you repeat this operation over and over, the voice messages will be recorded in the sequence of V001, V002....V00N. Note -This feature allows you to easily record lectures at school or institute, interview and conference messages, etc. It therefore enhances study effectiveness and lets you keep important things for a long time. -The player will automatically stop recording when the memory becomes full. -The voice messages are recorded on the built-in memory. If the memory is short in capacity, however, they will be recorded on the smart media card (in the sequence of V001, V002... V00N). -Be careful not to press the Erase button long because the erasing function may run. -Voice recording is made only on the main system. Playing the recorded voice messages 1 Use the FF ( ) buttons to select the 2 Press the button once again. - Press the Note -When you press the V002... V00n, you can listen to the recorded track that applies to the number currently shown on the LCD panel. -Press the FF or REW button during playback to move forward or in reverse at a faster speed. Playing the recorded voice messages 1 Use the FF and REW buttons to select the track (V001, V002...) you want to erase. 2 Press the ERASE button for at least 1 second and the message "Erase?" will appear on the LCD panel. Then press the Note -To cancel the erasing function press the button. -After the selected track is erased, the player will show the next track number. ) and REW ( track (V001, V002...) you prefer. button to playback the selected track. You can pause the track by pressing the button again to resume playback. button without selecting V001, button to erase the selected track. Listening to FM Radio To Search the Frequency Band 1 Press the MODE button to switch to FM mode. 2 Press and hold either REW ( ) or FF ( ). Then, the unit will automatically search from station to station (Auto Search). 3 To search manully in one step increments, press and release either REW or FF. Note -In the FM mode, the LCD panel backlight is not turned on. -In the FM mode, the screen display does not appear in the main system. -Once the power is turned off, initialization will be made at MP3 mode. To set to FM mode, press the MODE button again. -When in the FM mode, do not attempt Format, Delete or Download. To Save Radio Station 1 At the radio station frequency that you want to save, press the EQ/REP button. 2 A saving location letter (a, b, c, d, e) blinks in fron...
Эта инструкция также подходит к моделям:Плееры - YP-NDU28E (919.89 kb)
Плееры - YP-NDU64CF (919.89 kb)
Плееры - YP-NDU64NF (919.89 kb)
Плееры - YP-NDU64S (919.89 kb)