Оценок - 1, средний балл: 4
(
)
)
|
Фрагмент инструкции
When the memory is full, the “ –– ” indicator flashes in the display. 7.) To begin programmed playback press the PLAY/PAUSE button. The display will show the first programmed track and playback will begin on that track. The MEMORY indicator remains “On”. After the last programmed track has played the player stops but the programmed tracks remain in the memory. To play the programmed tracks again, press the CLOCK/MEMORY/AUTO PRESET button and then the PLAY/PAUSE button. To cancel the programmed sequence from memory, press the STOP/BAND button at programming mode, or open the CD door. Programmed Repeat Playback You can use the Program and Repeat features together to continuously repeat a programmed sequence of tracks. • First, program the desired tracks according to Steps 1 through 7 on page 18. • When Programmed Playback begins, press the PLAY MODE/M-UP button twice to activate the All Tracks Repeat feature. • The REPEAT indicator appears in display and all the tracks in your programmed sequence will be repeated continuously. To cancel Programmed Repeat Playback press the STOP/BAND button until both the MEMORY and REPEAT indicators go ‘Off’. 19 PD3812_B032305.p65 19 23/3/2005, 15:02 20 Playing Cassette Tapes 1.) Press the POWER button to turn on. Press the FUNCTION button to select the TAPE mode. The correct time appears in display. 2.) Open the cassette door by pressing the STOP/EJECT key. 3.) Place a pre-recorded cassette tape into the slots on the inside of the door with the exposed tape facing up and the full reel on the right side. Close the cassette door. 4.) Press the cassette PLAY key to begin playback. 5.) Adjust the VOLUME and BASS BOOST controls as desired. 6.) To advance the tape rapidly press the F.FWD key. To stop the tape before it ends press the STOP/EJECT key. 7.) To rewind the tape rapidly press the REWIND key. To stop the tape before it ends press the STOP/EJECT key. 8.) When the tape ends the Automatic Stop System releases the PLAY key and shuts off the tape motor. You may then open the cassette door, remove your tape, turn it over and play the other side if desired. PD3812_B032305.p65 20 23/3/2005, 15:02 9.) When you are finished listening stop the tape, open the door, remove the tape and close the door. If you are playing a tape and then change to the Radio or CD function be sure to press the STOP/EJECT key to disengage the tape mechanism. This prevents excess wear and tear on the mechanism. IMPORTANT: Always press the STOP/EJECT key to shut off the tape motor before opening the cassette door to remove your tape. The Automatic Stop System does not function in the F. FWD and REWIND modes. When the tape ends in the F. FWD DD and REWIND modes the motor continues to run. You must press the STOP/EJECT key to shut off the motor before opening the door to remove your tape. 21 PD3812_B032305.p65 21 23/3/2005, 15:02 Making A Tape Recording This model allows you to make tape recordings directly from the CD player, or the radio. • Refer to “Playing Compact Discs”on page 14 if necessary to operate the CD player. • Refer to “Listening To The Radio” on page 10 if necessary to tune in the station you wish to record from radio. 1.) Press the STOP/EJECT key to open the cassette door. .. 2.) Insert a good quality blank cassette tape into the slots on the cassette door with the open end facing up and the full reel on the right. Use normal tape only.Do not use tape identified as “CrO2”(Chrome) or “Metal” tape formulations. For best results use tapes of 60 minutes (C-60) or less. Do not use 90 minute or 120 minute tapes as these thinner tapes are more likely to jam in the mechanism. 3.) Close the cassette door. 4.) When you are ready to start recording press the RECORD key. The PLAY YY key will also engage. The CD you are playing, or radio program you selected will be recorded directly on to the tape. 5.) Press the PAUSE key during recording to stop the tape temporarily and avoid recording unwanted material such as radio commercials. 6.) When you have finished recording press the STOP/EJECT key to stop and remove the tape. 22 PD3812_B032305.p65 22 23/3/2005, 15:02 Automatic Recording Volume Level Control This unit has an Automatic Level Control (ALC) circuit which controls the recording volume level and prevents overloaded and distorted recordings. The VOLUME and BASS BOOST controls have no effect on recording volume level. You may change the VOLUME and BASS BOOST controls setting during the recording or even reduce the volume level to “Minimum”. This will not effect the level of the recording. 23 PD3812_B032305.p65 23 23/3/2005, 15:02 PHONES Jack Connect a set of stereo headphones (not included) with a 3.5mm mini plug to the PHONES jack (located at rear left top cabinet) for private listening without disturbing others. Before putting on the headphones reduce the VOLUME control to a low level, then put the headphones on and gradually increase the VOLUME control to a comfortable listening level. The built in...
Эта инструкция также подходит к моделям:Плееры - PD3812BL (442.87 kb)
Плееры - PD3812BK (442.87 kb)