Оценок - 3, средний балл: 4
(
)
)
|
Фрагмент инструкции
When the unit is powered off The “(” indication appears only when [1;] (main unit) is pressed. Before operating the buttons Be sure to move [HOLD] to release the unit from the HOLD mode. Sequential Play Basic Play 23 1 54 LR OPEN HOLD VOL VOL S-XBS VOL TRAIN ALL RANDOM SORRY 1 M C S-XBS VOL TRAIN ALL RANDOM SORRY 1 M C OPROFF Label must face upward. Track number in play Elapsed playing time of each track Plug type: 3.5 mm (1/8 in.) stereo Increase Decrease Close the lid Follow steps 1–5. In step 2: Connect the stereo headphones and wired remote control to the headphone jack [E]. (Plug in firmly.) In step 5: The volume range is 0-25. Press and hold to change the volume successively. The volume changes when pressed while the level is displayed. If any other display is shown, it changes to show the current level. (The volume returns to 10 when you disconnect the power source.) .Play stops automatically when all the tracks have been played. .If the unit has been connected to the car audio system, set this unit’s volume to 10, then adjust the volume level on the system. Operation Button Display/reference To pause play Press during play. Press again to restart play. S-XBS VOL TRAIN ALL1 M C To stop play Stop mode Press during play. OPROFF S-XBS VOL TRAIN ALL1 M C Total number of tracks Total playing time To turn off the unit Off mode Press during stop mode. OPROFF S-XBS VOL TRAIN ALL1 M C Skip forward/ backward (skip function) Press during play. (Press [:] twice to skip to the beginning of the previous tracks.) Press and hold during play. Backward Forward .During program play (page 4), these buttons are used to skip forward or backward through the programmed sequence of tracks. .You cannot skip to tracks that have been played in random or random repeat play (page 4). .During program play, 1-track repeat play, random play and random repeat play (page 4), search operation is limited to the current track only. Rapid forward/ backward (search function) For your reference: “ ” indication This indication appears for about 30 seconds if [1;] (main unit) or [./1] (remote control) is pressed when no disc is loaded in the unit or if the disc is not properly secured. “*” indication This indication appears for about 10 minutes when the lid is opened. (However, the indication does not appear when the unit is powered off.) Resume function The player stores the track where you stopped play and if you press [1;] (main unit) or [./1] (remote control), play resumes from the beginning of the track. The resume function is canceled (play starts from the first track) if you open the lid when the unit is in stop mode. It is also usually canceled when you replace the CD while the unit is off. Note! .The resume function may work if you replace the CD while the unit is off. .If you turned the unit off near the end of the track, play may resume from the beginning of the next track. .The resume function works automatically and cannot be turned off. Removing discs 1 Press [.,OPR OFF] to stop play and disc rotation. 2 Slide [OPEN 1] to open the lid. 3 Press [PUSH] to release the disc. Do not stop the disc by hand or try to remove it before it stops rotating. This can damage CDs. PUSH PUSH Note! Never insert foreign objects into the unit. Auto power off function If the unit is left in stop mode for approximately 10 minutes, the unit powers itself off automatically in order to prevent the battery from running down. (If no disc is loaded in the unit, it powers itself off in about 30 seconds.) Note on CD-R and CD-RW This unit can play CD-DA format audio CD-R and CD-RW that have been finalized§ upon completion of recording. It may not be able to play some CD-R or CD-RW due to the condition of the recording. §Finalizing is a process that enables CD-R/CD-RW players to play audio CD-R and CD-RW. Other Play Methods The letters such as Ain the various illustrations refer to the descriptions in the “Location of Controls” section (see below). . To program the same track in the se- Skip play quence more than once Changing the sound quality . After step 2, press [MEMORY/RECALL] the desired The disc plays from the specified track through to the number of times. Press during play or stop mode. end, then play stops automatically. . If “'” is displayed Preparation: Put unit in stop mode. . No more tracks can be programmed. Main unit . To confirm the contents of the program 1 Select the desired track. . Press [MEMORY/RECALL] while the disc is playing. D (The number of the programmed tracks appear on the display in sequence.) . To delete the entire programmed se- G quence MEMORY/RECALL EQ VOL VOL EQ Remote control . Press [.,OPR OFF]. Note! The repeat and random play modes are canceled after steps 1 and 2. Beep Repeat play/Random play The setting switches in the sequence indicated below F each time [EQ] is pressed. Press during play or stop mode. S-XBS>TRAIN>Cancel (no indicator is shown) ^==========b E S-XBS: Program play Select this setting to boost the low-ra...