Оценок - 4, средний балл: 3.5
(
)
)
|
Фрагмент инструкции
Using DISPLAY/CHARA. button while recording Each time you press the button, the display window switches between the remaining time and the elapsed time with the current track number alternately. Monophonic Long Recording Using the REC MODE settings, you can record FM/AM broadcasts for twice as long as given recording time of the MD in monaural reception. 1 Repeat the steps 1, 2 and 3 in previous page. 2 Press REC MODE button to select a recording mode as follows: 3 Press SET button to start recording. You can double the recording time length, and information appears in the display window as follows: Remaining time for recording • To stop recording temporarily, press REC PAUSE button or 6(play/pause) button on the MD recorder or MD 6(play/pause) button on the remote control. • To resume recording, press 6(play/pause) button on the MD recorder or MD 6(play/pause) button on the remote control again. 13 EnglishEnglish Continued Recording a CD When recording a CD onto an MD, you can record the entire CD or the particular tracks manually and using the synchronized recording. Recording a CD Manually You can start recording an entire CD or any tracks of a CD while listening. 1 Insert a recordable MD into the MD loading slot. The MD IN lamp lights orange. 2 Prepare a CD. • Place a CD on the disc tray, press 6(play/pause) button on the CD player or CD 6(play/pause) on the remote control, then press 7(stop) button before going to the next step. • You can also record programed tracks if you want (refer to FS-G6’s Instructions, pages 17 to 18). 3 Press REC PAUSE button on the MD recorder. The REC indicator on the MD recorder lights red. 4 Press 6 (play/pause) button on the CD player or CD 6 (play/pause) button on the remote control. Recording starts automatically, and information changes in the display window as follows: CD Track number Remaining time of each track Recording a CD — Synchronized Recording This is the easiest way of CD recording. Setting the recording mode, you can start playing back an entire CD and recording it onto an MD simultaneously. 1 Repeat the steps 1 and 2 in previous section. 2 Press REC MODE button behind the sliding panel to select “SYNC REC >MD.” Each time you press the button, the recording mode changes as follows: SYNC REC SYNC REC > MD > TAPE (canceled) 3 Press SET button to start recording. Recording starts automatically, and information change in the display window as follows: CD Track number Remaining time of each track Remaining time for recording Each time you press DISPLAY/CHARA. button, information switches between the remaining time and elapsed time with the current track number alternately. While synchronized recording You cannot use pause function until the recording finishes. Remaining time for recording • To stop recording temporarily, press REC PAUSE button or 6(play/pause) button on the MD recorder or MD 6(play/pause) button on the remote control. • To resume recording, press 6(play/pause) button on the MD recorder or MD 6(play/pause) button on the remote control again. 5 Press 7 (stop) button to stop recording as required. “WRITING” appears in the display window, and you can remove the MD by pressing 0(eject) button. 4 Press 7 (stop) button (on either the CD player or the MD recorder) to quit recording as required. “WRITING” appears in the display window, and you can remove the MD by pressing 0(eject) button. • When all the tracks finished recording, CD player and MD recorder will automatically stop. To record a single track during playback Press REC MODE button to set “SYNC REC>MD” mode, you can record a current track during playback. The playback of the current track is stopped, and the same track starts playing back from the beginning again. At the same time, the MD recorder starts recording the current track. • When the current track is recorded, both CD player and MD recorder automatically stop. 14 EnglishEnglish Continued Recording a Tape When recording from TD-UXG6 cassette deck, you can select one of the two recording methods — Manual Recording (stereo) and Sound Synchronized Recording. • Manual Recording — Sound is recorded in stereo (both on the left and right audio channels). You have to operate the MD recorder and the cassette deck respectively. • Sound Synchronized Recording — With this method, you can start recording when the sound signals come into the MD recorder (sound is recorded in stereo). Sound Synchronized Recording will stop automatically if no sound comes in for more than 30 seconds. If Sound Synchronized Recording will not work correctly Use the Manual Recording. Sound Synchronized Recording starts automatically when the MD recorder detects sound signals come in. If sound signal is too weak for this unit to detect, Sound Synchronized Recording will not start (or will stop even while the source is being played). Recording a Tape Manually 1 Insert a recordable MD into the MD loading slot. The MD IN lamp lights orange. 2 Prepare a tape playback. • Plac...
Эта инструкция также подходит к моделям:Плееры - 0200JTMMDWJSCEN (478.91 kb)