Оценок - , средний балл: ( )

Инструкция по эксплуатации Kenwood, модель DPC-782

Производитель: Kenwood
Размер: 377.84 kb
Название файла: 6aacdfc5-fa7d-46b1-a1ee-706f753ada91.pdf

Язык инструкции:

Документ загружается, подождите пожалуйста

Скачать инструкциюЗакрыть

Документ загружается, подождите пожалуйста

Скачать инструкциюЗакрыть

Hi mode. 3D.A.S.C. OFF (cancel) When the player is used in a place free of vibration, it is recommended to release the D.A.S.C. to ex- tend the play time by reducing the battery power consumption. Each press changes the mode as follows. Setting the D.A.S.C. • The reproduced sound is interrupted during switching. D.A.S.C G 3 Display Storage of digital data Digital memory D.A.S.C. IH D.A.S.C. OLFFO Symptom Cause Remedy No operation occurs when operation keys are pressed. • The HOLD switch is set to HOLD. • The batteries are exhausted. • The disc is placed upside down. • Condensation has occurred inside the unit. • The AC adaptor or car battery adaptor is disconnected. • Deactivate HOLD status. • Replace all of the alkaline batteries, or recharge the rechargeable batteries. • Place the disc with the labeled side up. • Leave the unit for about 1 hour before re-use. • Connect it properly. No sound is heard from • The headphones are connected in• Insert the plug securely into the the headphones. completely. • The volume is set to the minimum position on the main unit or remote control unit. headphones jack. • Adjust the volume on the main unit or remote control unit. Sound skips, or is interrupted. • The D.A.S.C. is set to “OFF”. • A strong vibration that exceeds the capacity of the D.A.S.C. has occurred. • The disc is dirty. • The lens is dirty. • The headphone plug is dirty. • The batteries are low. • Set the D.A.S.C. to “ON”. • Place the unit in a place not subject to vibration. • Clean it. • Clean it. • Clean it. • Replace or recharge the batteries. Noise interferes. • The headphone plug is dirty. • The batteries are low. • The headphones are connected incompletely. • Clean it. • Replace or recharge the batteries. • Insert the plug securely into the headphones jack. Rechargeable batteries • Commercially-available recharge• Use the special rechargeable cannot be recharged. able batteries are used. • Batteries have been inserted to the “2 LONG PLAY” side. batteries (NB-130,NB-77 or NB-88). • Do not insert batteries to the “2 LONG PLAY” side. For CHINA and Duty free shop in JAPAN Digital recording is not possible for MD and DAT. • The D.A.S.C. function is ON. • Batteries are used for playback. • Please cancel the D.A.S.C. function. • Please use a household power supply (AC adaptor). Notes : 1. This system uses a microcomputer so it may malfunction due to external noise or interference. In such a case, unplug the power cord and remove the batteries, then plug the power cord again and insert the batteries again. 2. Erroneous operation may occur when the headphone plug is plugged or unplugged; but this is not a malfunction. DPC-981/782/781 (En/M) INPUT INPUT CD R L PORTABLE MD RECORDING DMC -G7R REMOTE PHONES OPT. OUT OPT. OUT REMOTE PHONES LINE OUT DC IN _ + A A A Connections Listening through car audio • If sound is not produced, change the tape playing direction of the car stereo. (Sound is not produced if the car stereo is set to play tape side B.) • Audio reproduction may be impossible with the following types of car stereo: Models which function by detecting the tape tension. (With these car stereo models, the Car cassette adaptor is ejected automatically when it is inserted.) Insert into cassette deck slot. Car cassette adaptor See “Accessories”. Car stereo Listening through speakers Speakers with built-in amplifier Notes: *1.The REMOTE terminal can be used only when the unit has headphones with remote controller. Do not use this terminal for other purpose than the above. *2.With connection to the LINE OUT terminal, no sound will be put out from the PHONES terminal. Mains power operation AC adaptor Car battery powered operation • When the unit is not used, unplug the car battery adaptor. (Otherwise, the car battery may run out, with some car models.) • The plug may not match the cigar lighter socket of some car models. • If the unit cannot be operated with the car battery adaptor connected, suspect the possibility of a blown fuse. The fuse can be replaced by turning the electrode on the tip of the adaptor plug. When replacing the fuse, be sure to use a fuse with a rating of 1 A. Car stereo Connect to cigar lighter socket. Car battery adaptor (Cars with DC-12V battery only) See “Accessories”. Recharging the batteries Battery duration indicator The duration at which the battery indicator starts to blink is variable depending on the type of battery used. Refer to the table on the right. 3 Close the cover. Rechargeable batteries Alkaline batteries Treatment When the batteries are nearly exhausted When the batteries are half exhausted In a while, the power will be turned off automatically. Then recharge the batteries. Playback is possible while the indicator is blinking. Battery Type Blinking Timing 3 Plug in the AC adaptor. 4 Wait for 5 seconds, then press the 7 key twice quickly. Connect to DC IN jack. Battery duration indicator 2 Insert two rechargeable batteries or two LR6 alkaline batteries following the pol...