Войти:
Оценок - 1, средний балл: 3 ( )

Инструкция по эксплуатации Insignia, модель 09-1061

Производитель: Insignia
Размер: 586.06 kb
Название файла:
Язык инструкции:en
Перейти к скачиванию



Фрагмент инструкции


12 Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 13 Unplug this apparatus during lightning storms or when unused for long periods of time. been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 15 To reduce the risk of fire or electric shock, do not expose this device to rain, moisture, dripping, or splashing, and no objects filled with liquids, such as vases, shall be placed on it. 16 An apparatus with a three-prong, grounding-type plug is a Class I apparatus, which needs to be grounded to prevent possible electric shock. Make sure that you connect this Class I device to a grounding-type, three-prong outlet. 17 The wall plug is the disconnecting device. The plug must remain readily operable. 18 Batteries should not be exposed to excessive heat such as sunshine, fire, or the like. Warning Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. NS-IPSD2 Insignia NS-IPSD2 MP3 Speaker System Insignia NS-IPSD2 MP3 Speaker System Introduction Congratulations on your purchase of a high-quality Insignia product. Your NS-IPSD2 represents the state of the art in MP3 speaker system design and is designed for reliable and trouble-free performance. Front with cradle closed Features Package contents • MP3 speaker system • AC power adapter •8 iPod adapters •Soft carrying pouch #ItemDescription 123 Open dock button Press to open the dock. Speakers Produce sound. Unfold the dock to insert the adapter and iPod. Dock Insignia NS-IPSD2 MP3 Speaker System Front with cradle open Note: iPod not included #ItemDescription 123 Volume up/down buttons Press to increase or decrease the volume. Power button Press to turn your speaker system on or off. When your speaker system is turned on, the LED (below the power button) lights. iPod dock Insert your iPod into the correct adapter, then insert the iPod and adapter into this dock. NS-IPSD2 Insignia NS-IPSD2 MP3 Speaker System Back #ItemDescription 1234 Battery compartment Insert batteries into this compartment. DC IN Connect the AC power adapter to this jack and to a power outlet. AUX IN Connect an audio device to this jack. Stand Unfold the stand to set your speaker system in an upright position. Connecting the AC power adapter • Connect the AC power adapter to the DC IN jack Setting up your MP3 on the back of your speaker system. speaker system Installing the batteries To install the batteries: 1 Remove the battery compartment cover. 2 Insert four AA batteries into the battery compartment. Make sure that the + and – symbols on the batteries align with the + and – symbols inside the battery compartment. 3 Replace the cover. Insignia NS-IPSD2 MP3 Speaker System Using your MP3 speaker system Inserting an iPod To insert an iPod: 1 Make sure that batteries are installed in the speaker system or the AC power adapter is connected to the speaker system and a power outlet. Notes Battery life is about eight (8) hours. You can use the AC power adapter when the batteries are depleted. 2 Press the open dock button on the front of your speaker system to unfold the dock. Open dock button Unfolded dock 3 Select the correct adapter, then insert it into the iPod dock. Adpaters are labeled with the names of the iPod models. 4 Insert the iPod into the adapter. 5 Pull the stand out to set the speaker system upright. 6 Press the power button. The LED lights. 7 Press the volume up or volume down button to adjust the volume. 8 Press the power button again to turn off your speaker system. Connecting an audio device You can connect an audio device to the AUX in jack. To connect an audio device: 1 Make sure that batteries are installed in the speaker system or the AC power adapter is connected to the speaker system and a power outlet. Notes Battery life is about eight (8) hours. You can use the AC power adapter when the batteries are depleted. 2 Connect a 35mm audio cable to the AUX in jack on the back of your speaker system and to the audio out jack on the audio device. 3 Pull the stand out to set the speaker system upright. 4Press the power button. The LED lights. 5Press the volume up or volume down button to adjust the volume. 6Press the power button again to turn off your speaker system. NS-IPSD2 Insignia NS-IPSD2 MP3 Speaker System Troubleshooting ProblemSolution My iPod is in the dock and playing, but I can't hear any music. There isn't an adapter for my iPod. • Make sure that the speakers are turned on. When the speakers are turned on, the power LED lights red. • Adjust the volume l...

Эта инструкция также подходит к моделям:
Плееры - NS-IPSD2 (586.06 kb)

Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории