Оценок - 2, средний балл: 4.5
(
)
)
|
Фрагмент инструкции
to enter program mode. The PROGRAM icon shows on the display with “P01” (first program location) and “000” (for selecting track/file number) flash on the display. 2. Press REV or FWD to select the track to be stored. 3. Press PROG. to store the selected track. 4. Repeat step 2 and 3 to continue programming. 5. Press PLAY/PAUSE in program mode to start program playback. Press STOP to exit program creating mode. Displaying and Editing Program Lists • Press PROG. repeatedly to recall and display program. • While track number is displayed, press REV or FWD to edit track number. Press PROG. to store newly selected track. Deleting Programs Opening the CD compartment door or switching mode will delete all the stored tracks. Creating Programs Cleaning the exterior • Disconnect the system from AC power before cleaning the exterior of the unit with a soft dust cloth • Clean the exterior with a soft clean cloth or slightly moistened chamois leather. DO NOT use solvents as it may cause damage to the unit. Handling CDs • Do not touch the signal surfaces. Hold CDs by the edges, or by one edge and the hole. • Do not affix labels or adhesive tapes to the label surfaces. Do not scratch or damage the label. • CDs rotate at high speeds inside the player. Do not use damaged (cracked or warped) CDs • Make sure CDs are stored in their original case after use. Keep them away from damp, humid or abnormally heated places. Cleaning CDs • Dirty CDs can cause poor sound quality. Always keep CDs clean by wiping them gently with a soft cloth from the inner edge toward the outer perimeter. • If a CD becomes dirty, wet a soft cloth in water, wring it out well, wipe the dirt away gently, and then remove any water drops with a dry cloth. • Do not use record cleaning sprays or antistatic agents on CDs. Also, never clean CDs with benzene, thinner, or other volatile solvents which may cause damage to disc surface. CD Lens Care • When your CD lens gets dirty it can also cause the system to output poor sound quality. To clean the lens you will need to purchase a CD lens cleaner which can maintain the output sound quality of your system. For instructions on cleaning the CD lens, refer to the ones accompanying the lens cleaner. Technical Specification Power supply: 120V~60Hz Dimensions ( H x W x D mm): Unit size - 153 x 361 x 264 Weight: 2.4 kg CD player: Response curve (+/- 2dB): 60Hz to 20 kHz Rating Plate: Look for it at the bottom of the set. The descriptions and characteristics in this owner’s manual are for the purpose of general reference only and not as a guarantee. In order to provide you with the highest quality product, we may make changes or modifications without prior notice. The English version serves as the final reference on all product and operational details should any discrepancies arise in other languages. • Minimum distances around the apparatus for sufficient ventilation. • The ventilation should not be impeded by covering the ventilation opening with items, such as newspaper, table-cloths, curtains, etc. • The rating plate is located at the bottom cabinet of apparatus. Headset Safety • Do not play your headset at high volume. Hearing experts warn against extended high-volume play. • If you experience ringing in your ears, reduce volume or discontinue use. • You should use with extreme caution or temporarily discontinue use in potentially hazardous situations. • Even if your headset is an open-air designed to let you to hear outside sounds, do not turn up the volume so high that you are unable to hear what is around you. Don’t Infringe This product should only be used for the purposes for which it is sold, that is, entertainment, violating no copyright law. Any attempts to use this product for unintended purposes are unlawful and therefore not condoned by Thomson. Before You Begin Special Features FCC Information English Important Information Radio RCD025 It is important to read this instruction book prior to using your new product for the first time. RCD159 u s e r m a n u a l mp3 Playback This player can play mp3 files stored on a CD. Bass Boost System Press BASS BOOST to turn the digital bass boost system on and off. Sound Equalizer Press the SOUND EQUALIZER button to select among the different sound effects (Rock, Jazz, Pop and Classic). Select Radio Mode When the unit is turned off, press SOURCE to turn the unit on. Press SOURCE repeatedly to select radio mode. Select Radio Band Press RADIO BAND to select FM or AM. Tips: Extend or reposition the antenna for better FM reception. Rotate the unit for better AM reception. Using Presets 1. Press RADIO BAND to select radio band. 2. Press PRESET UP or PRESET DOWN repeatedly to access the desired preset stations. Tuning to a station • Press REV to tune down radio frequency. • Press FWD to tune up radio frequency. Setting Preset Stations 1. In radio mode, press RADIO BAND to select radio band. 2. Press REV or FWD to select the station to be saved as a preset station. 3. Press PRO...